From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/display/drm_dsc_helper.c | 409 +++++++++++++++++++++++++++++++ 1 file changed, 409 insertions(+) create mode 100644 drivers/gpu/drm/display/drm_dsc_helper.c (limited to 'drivers/gpu/drm/display/drm_dsc_helper.c') diff --git a/drivers/gpu/drm/display/drm_dsc_helper.c b/drivers/gpu/drm/display/drm_dsc_helper.c new file mode 100644 index 000000000..c869c6e51 --- /dev/null +++ b/drivers/gpu/drm/display/drm_dsc_helper.c @@ -0,0 +1,409 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2018 Intel Corp + * + * Author: + * Manasi Navare + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +/** + * DOC: dsc helpers + * + * VESA specification for DP 1.4 adds a new feature called Display Stream + * Compression (DSC) used to compress the pixel bits before sending it on + * DP/eDP/MIPI DSI interface. DSC is required to be enabled so that the existing + * display interfaces can support high resolutions at higher frames rates uisng + * the maximum available link capacity of these interfaces. + * + * These functions contain some common logic and helpers to deal with VESA + * Display Stream Compression standard required for DSC on Display Port/eDP or + * MIPI display interfaces. + */ + +/** + * drm_dsc_dp_pps_header_init() - Initializes the PPS Header + * for DisplayPort as per the DP 1.4 spec. + * @pps_header: Secondary data packet header for DSC Picture + * Parameter Set as defined in &struct dp_sdp_header + * + * DP 1.4 spec defines the secondary data packet for sending the + * picture parameter infoframes from the source to the sink. + * This function populates the SDP header defined in + * &struct dp_sdp_header. + */ +void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header) +{ + memset(pps_header, 0, sizeof(*pps_header)); + + pps_header->HB1 = DP_SDP_PPS; + pps_header->HB2 = DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1; +} +EXPORT_SYMBOL(drm_dsc_dp_pps_header_init); + +/** + * drm_dsc_dp_rc_buffer_size - get rc buffer size in bytes + * @rc_buffer_block_size: block size code, according to DPCD offset 62h + * @rc_buffer_size: number of blocks - 1, according to DPCD offset 63h + * + * return: + * buffer size in bytes, or 0 on invalid input + */ +int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size) +{ + int size = 1024 * (rc_buffer_size + 1); + + switch (rc_buffer_block_size) { + case DP_DSC_RC_BUF_BLK_SIZE_1: + return 1 * size; + case DP_DSC_RC_BUF_BLK_SIZE_4: + return 4 * size; + case DP_DSC_RC_BUF_BLK_SIZE_16: + return 16 * size; + case DP_DSC_RC_BUF_BLK_SIZE_64: + return 64 * size; + default: + return 0; + } +} +EXPORT_SYMBOL(drm_dsc_dp_rc_buffer_size); + +/** + * drm_dsc_pps_payload_pack() - Populates the DSC PPS + * + * @pps_payload: + * Bitwise struct for DSC Picture Parameter Set. This is defined + * by &struct drm_dsc_picture_parameter_set + * @dsc_cfg: + * DSC Configuration data filled by driver as defined by + * &struct drm_dsc_config + * + * DSC source device sends a picture parameter set (PPS) containing the + * information required by the sink to decode the compressed frame. Driver + * populates the DSC PPS struct using the DSC configuration parameters in + * the order expected by the DSC Display Sink device. For the DSC, the sink + * device expects the PPS payload in big endian format for fields + * that span more than 1 byte. + */ +void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_payload, + const struct drm_dsc_config *dsc_cfg) +{ + int i; + + /* Protect against someone accidentally changing struct size */ + BUILD_BUG_ON(sizeof(*pps_payload) != + DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 + 1); + + memset(pps_payload, 0, sizeof(*pps_payload)); + + /* PPS 0 */ + pps_payload->dsc_version = + dsc_cfg->dsc_version_minor | + dsc_cfg->dsc_version_major << DSC_PPS_VERSION_MAJOR_SHIFT; + + /* PPS 1, 2 is 0 */ + + /* PPS 3 */ + pps_payload->pps_3 = + dsc_cfg->line_buf_depth | + dsc_cfg->bits_per_component << DSC_PPS_BPC_SHIFT; + + /* PPS 4 */ + pps_payload->pps_4 = + ((dsc_cfg->bits_per_pixel & DSC_PPS_BPP_HIGH_MASK) >> + DSC_PPS_MSB_SHIFT) | + dsc_cfg->vbr_enable << DSC_PPS_VBR_EN_SHIFT | + dsc_cfg->simple_422 << DSC_PPS_SIMPLE422_SHIFT | + dsc_cfg->convert_rgb << DSC_PPS_CONVERT_RGB_SHIFT | + dsc_cfg->block_pred_enable << DSC_PPS_BLOCK_PRED_EN_SHIFT; + + /* PPS 5 */ + pps_payload->bits_per_pixel_low = + (dsc_cfg->bits_per_pixel & DSC_PPS_LSB_MASK); + + /* + * The DSC panel expects the PPS packet to have big endian format + * for data spanning 2 bytes. Use a macro cpu_to_be16() to convert + * to big endian format. If format is little endian, it will swap + * bytes to convert to Big endian else keep it unchanged. + */ + + /* PPS 6, 7 */ + pps_payload->pic_height = cpu_to_be16(dsc_cfg->pic_height); + + /* PPS 8, 9 */ + pps_payload->pic_width = cpu_to_be16(dsc_cfg->pic_width); + + /* PPS 10, 11 */ + pps_payload->slice_height = cpu_to_be16(dsc_cfg->slice_height); + + /* PPS 12, 13 */ + pps_payload->slice_width = cpu_to_be16(dsc_cfg->slice_width); + + /* PPS 14, 15 */ + pps_payload->chunk_size = cpu_to_be16(dsc_cfg->slice_chunk_size); + + /* PPS 16 */ + pps_payload->initial_xmit_delay_high = + ((dsc_cfg->initial_xmit_delay & + DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK) >> + DSC_PPS_MSB_SHIFT); + + /* PPS 17 */ + pps_payload->initial_xmit_delay_low = + (dsc_cfg->initial_xmit_delay & DSC_PPS_LSB_MASK); + + /* PPS 18, 19 */ + pps_payload->initial_dec_delay = + cpu_to_be16(dsc_cfg->initial_dec_delay); + + /* PPS 20 is 0 */ + + /* PPS 21 */ + pps_payload->initial_scale_value = + dsc_cfg->initial_scale_value; + + /* PPS 22, 23 */ + pps_payload->scale_increment_interval = + cpu_to_be16(dsc_cfg->scale_increment_interval); + + /* PPS 24 */ + pps_payload->scale_decrement_interval_high = + ((dsc_cfg->scale_decrement_interval & + DSC_PPS_SCALE_DEC_INT_HIGH_MASK) >> + DSC_PPS_MSB_SHIFT); + + /* PPS 25 */ + pps_payload->scale_decrement_interval_low = + (dsc_cfg->scale_decrement_interval & DSC_PPS_LSB_MASK); + + /* PPS 26[7:0], PPS 27[7:5] RESERVED */ + + /* PPS 27 */ + pps_payload->first_line_bpg_offset = + dsc_cfg->first_line_bpg_offset; + + /* PPS 28, 29 */ + pps_payload->nfl_bpg_offset = + cpu_to_be16(dsc_cfg->nfl_bpg_offset); + + /* PPS 30, 31 */ + pps_payload->slice_bpg_offset = + cpu_to_be16(dsc_cfg->slice_bpg_offset); + + /* PPS 32, 33 */ + pps_payload->initial_offset = + cpu_to_be16(dsc_cfg->initial_offset); + + /* PPS 34, 35 */ + pps_payload->final_offset = cpu_to_be16(dsc_cfg->final_offset); + + /* PPS 36 */ + pps_payload->flatness_min_qp = dsc_cfg->flatness_min_qp; + + /* PPS 37 */ + pps_payload->flatness_max_qp = dsc_cfg->flatness_max_qp; + + /* PPS 38, 39 */ + pps_payload->rc_model_size = cpu_to_be16(dsc_cfg->rc_model_size); + + /* PPS 40 */ + pps_payload->rc_edge_factor = DSC_RC_EDGE_FACTOR_CONST; + + /* PPS 41 */ + pps_payload->rc_quant_incr_limit0 = + dsc_cfg->rc_quant_incr_limit0; + + /* PPS 42 */ + pps_payload->rc_quant_incr_limit1 = + dsc_cfg->rc_quant_incr_limit1; + + /* PPS 43 */ + pps_payload->rc_tgt_offset = DSC_RC_TGT_OFFSET_LO_CONST | + DSC_RC_TGT_OFFSET_HI_CONST << DSC_PPS_RC_TGT_OFFSET_HI_SHIFT; + + /* PPS 44 - 57 */ + for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++) + pps_payload->rc_buf_thresh[i] = + dsc_cfg->rc_buf_thresh[i]; + + /* PPS 58 - 87 */ + /* + * For DSC sink programming the RC Range parameter fields + * are as follows: Min_qp[15:11], max_qp[10:6], offset[5:0] + */ + for (i = 0; i < DSC_NUM_BUF_RANGES; i++) { + pps_payload->rc_range_parameters[i] = + cpu_to_be16((dsc_cfg->rc_range_params[i].range_min_qp << + DSC_PPS_RC_RANGE_MINQP_SHIFT) | + (dsc_cfg->rc_range_params[i].range_max_qp << + DSC_PPS_RC_RANGE_MAXQP_SHIFT) | + (dsc_cfg->rc_range_params[i].range_bpg_offset)); + } + + /* PPS 88 */ + pps_payload->native_422_420 = dsc_cfg->native_422 | + dsc_cfg->native_420 << DSC_PPS_NATIVE_420_SHIFT; + + /* PPS 89 */ + pps_payload->second_line_bpg_offset = + dsc_cfg->second_line_bpg_offset; + + /* PPS 90, 91 */ + pps_payload->nsl_bpg_offset = + cpu_to_be16(dsc_cfg->nsl_bpg_offset); + + /* PPS 92, 93 */ + pps_payload->second_line_offset_adj = + cpu_to_be16(dsc_cfg->second_line_offset_adj); + + /* PPS 94 - 127 are O */ +} +EXPORT_SYMBOL(drm_dsc_pps_payload_pack); + +/** + * drm_dsc_compute_rc_parameters() - Write rate control + * parameters to the dsc configuration defined in + * &struct drm_dsc_config in accordance with the DSC 1.2 + * specification. Some configuration fields must be present + * beforehand. + * + * @vdsc_cfg: + * DSC Configuration data partially filled by driver + */ +int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg) +{ + unsigned long groups_per_line = 0; + unsigned long groups_total = 0; + unsigned long num_extra_mux_bits = 0; + unsigned long slice_bits = 0; + unsigned long hrd_delay = 0; + unsigned long final_scale = 0; + unsigned long rbs_min = 0; + + if (vdsc_cfg->native_420 || vdsc_cfg->native_422) { + /* Number of groups used to code each line of a slice */ + groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width / 2, + DSC_RC_PIXELS_PER_GROUP); + + /* chunksize in Bytes */ + vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width / 2 * + vdsc_cfg->bits_per_pixel, + (8 * 16)); + } else { + /* Number of groups used to code each line of a slice */ + groups_per_line = DIV_ROUND_UP(vdsc_cfg->slice_width, + DSC_RC_PIXELS_PER_GROUP); + + /* chunksize in Bytes */ + vdsc_cfg->slice_chunk_size = DIV_ROUND_UP(vdsc_cfg->slice_width * + vdsc_cfg->bits_per_pixel, + (8 * 16)); + } + + if (vdsc_cfg->convert_rgb) + num_extra_mux_bits = 3 * (vdsc_cfg->mux_word_size + + (4 * vdsc_cfg->bits_per_component + 4) + - 2); + else if (vdsc_cfg->native_422) + num_extra_mux_bits = 4 * vdsc_cfg->mux_word_size + + (4 * vdsc_cfg->bits_per_component + 4) + + 3 * (4 * vdsc_cfg->bits_per_component) - 2; + else + num_extra_mux_bits = 3 * vdsc_cfg->mux_word_size + + (4 * vdsc_cfg->bits_per_component + 4) + + 2 * (4 * vdsc_cfg->bits_per_component) - 2; + /* Number of bits in one Slice */ + slice_bits = 8 * vdsc_cfg->slice_chunk_size * vdsc_cfg->slice_height; + + while ((num_extra_mux_bits > 0) && + ((slice_bits - num_extra_mux_bits) % vdsc_cfg->mux_word_size)) + num_extra_mux_bits--; + + if (groups_per_line < vdsc_cfg->initial_scale_value - 8) + vdsc_cfg->initial_scale_value = groups_per_line + 8; + + /* scale_decrement_interval calculation according to DSC spec 1.11 */ + if (vdsc_cfg->initial_scale_value > 8) + vdsc_cfg->scale_decrement_interval = groups_per_line / + (vdsc_cfg->initial_scale_value - 8); + else + vdsc_cfg->scale_decrement_interval = DSC_SCALE_DECREMENT_INTERVAL_MAX; + + vdsc_cfg->final_offset = vdsc_cfg->rc_model_size - + (vdsc_cfg->initial_xmit_delay * + vdsc_cfg->bits_per_pixel + 8) / 16 + num_extra_mux_bits; + + if (vdsc_cfg->final_offset >= vdsc_cfg->rc_model_size) { + DRM_DEBUG_KMS("FinalOfs < RcModelSze for this InitialXmitDelay\n"); + return -ERANGE; + } + + final_scale = (vdsc_cfg->rc_model_size * 8) / + (vdsc_cfg->rc_model_size - vdsc_cfg->final_offset); + if (vdsc_cfg->slice_height > 1) + /* + * NflBpgOffset is 16 bit value with 11 fractional bits + * hence we multiply by 2^11 for preserving the + * fractional part + */ + vdsc_cfg->nfl_bpg_offset = DIV_ROUND_UP((vdsc_cfg->first_line_bpg_offset << 11), + (vdsc_cfg->slice_height - 1)); + else + vdsc_cfg->nfl_bpg_offset = 0; + + /* Number of groups used to code the entire slice */ + groups_total = groups_per_line * vdsc_cfg->slice_height; + + /* slice_bpg_offset is 16 bit value with 11 fractional bits */ + vdsc_cfg->slice_bpg_offset = DIV_ROUND_UP(((vdsc_cfg->rc_model_size - + vdsc_cfg->initial_offset + + num_extra_mux_bits) << 11), + groups_total); + + if (final_scale > 9) { + /* + * ScaleIncrementInterval = + * finaloffset/((NflBpgOffset + SliceBpgOffset)*8(finalscale - 1.125)) + * as (NflBpgOffset + SliceBpgOffset) has 11 bit fractional value, + * we need divide by 2^11 from pstDscCfg values + */ + vdsc_cfg->scale_increment_interval = + (vdsc_cfg->final_offset * (1 << 11)) / + ((vdsc_cfg->nfl_bpg_offset + + vdsc_cfg->slice_bpg_offset) * + (final_scale - 9)); + } else { + /* + * If finalScaleValue is less than or equal to 9, a value of 0 should + * be used to disable the scale increment at the end of the slice + */ + vdsc_cfg->scale_increment_interval = 0; + } + + /* + * DSC spec mentions that bits_per_pixel specifies the target + * bits/pixel (bpp) rate that is used by the encoder, + * in steps of 1/16 of a bit per pixel + */ + rbs_min = vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset + + DIV_ROUND_UP(vdsc_cfg->initial_xmit_delay * + vdsc_cfg->bits_per_pixel, 16) + + groups_per_line * vdsc_cfg->first_line_bpg_offset; + + hrd_delay = DIV_ROUND_UP((rbs_min * 16), vdsc_cfg->bits_per_pixel); + vdsc_cfg->rc_bits = (hrd_delay * vdsc_cfg->bits_per_pixel) / 16; + vdsc_cfg->initial_dec_delay = hrd_delay - vdsc_cfg->initial_xmit_delay; + + return 0; +} +EXPORT_SYMBOL(drm_dsc_compute_rc_parameters); -- cgit v1.2.3