From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/drm_bridge_connector.c | 403 +++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 drivers/gpu/drm/drm_bridge_connector.c (limited to 'drivers/gpu/drm/drm_bridge_connector.c') diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c new file mode 100644 index 000000000..1c7d93652 --- /dev/null +++ b/drivers/gpu/drm/drm_bridge_connector.c @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Laurent Pinchart + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * DOC: overview + * + * The DRM bridge connector helper object provides a DRM connector + * implementation that wraps a chain of &struct drm_bridge. The connector + * operations are fully implemented based on the operations of the bridges in + * the chain, and don't require any intervention from the display controller + * driver at runtime. + * + * To use the helper, display controller drivers create a bridge connector with + * a call to drm_bridge_connector_init(). This associates the newly created + * connector with the chain of bridges passed to the function and registers it + * with the DRM device. At that point the connector becomes fully usable, no + * further operation is needed. + * + * The DRM bridge connector operations are implemented based on the operations + * provided by the bridges in the chain. Each connector operation is delegated + * to the bridge closest to the connector (at the end of the chain) that + * provides the relevant functionality. + * + * To make use of this helper, all bridges in the chain shall report bridge + * operation flags (&drm_bridge->ops) and bridge output type + * (&drm_bridge->type), as well as the DRM_BRIDGE_ATTACH_NO_CONNECTOR attach + * flag (none of the bridges shall create a DRM connector directly). + */ + +/** + * struct drm_bridge_connector - A connector backed by a chain of bridges + */ +struct drm_bridge_connector { + /** + * @base: The base DRM connector + */ + struct drm_connector base; + /** + * @encoder: + * + * The encoder at the start of the bridges chain. + */ + struct drm_encoder *encoder; + /** + * @bridge_edid: + * + * The last bridge in the chain (closest to the connector) that provides + * EDID read support, if any (see &DRM_BRIDGE_OP_EDID). + */ + struct drm_bridge *bridge_edid; + /** + * @bridge_hpd: + * + * The last bridge in the chain (closest to the connector) that provides + * hot-plug detection notification, if any (see &DRM_BRIDGE_OP_HPD). + */ + struct drm_bridge *bridge_hpd; + /** + * @bridge_detect: + * + * The last bridge in the chain (closest to the connector) that provides + * connector detection, if any (see &DRM_BRIDGE_OP_DETECT). + */ + struct drm_bridge *bridge_detect; + /** + * @bridge_modes: + * + * The last bridge in the chain (closest to the connector) that provides + * connector modes detection, if any (see &DRM_BRIDGE_OP_MODES). + */ + struct drm_bridge *bridge_modes; +}; + +#define to_drm_bridge_connector(x) \ + container_of(x, struct drm_bridge_connector, base) + +/* ----------------------------------------------------------------------------- + * Bridge Connector Hot-Plug Handling + */ + +static void drm_bridge_connector_hpd_notify(struct drm_connector *connector, + enum drm_connector_status status) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *bridge; + + /* Notify all bridges in the pipeline of hotplug events. */ + drm_for_each_bridge_in_chain(bridge_connector->encoder, bridge) { + if (bridge->funcs->hpd_notify) + bridge->funcs->hpd_notify(bridge, status); + } +} + +static void drm_bridge_connector_hpd_cb(void *cb_data, + enum drm_connector_status status) +{ + struct drm_bridge_connector *drm_bridge_connector = cb_data; + struct drm_connector *connector = &drm_bridge_connector->base; + struct drm_device *dev = connector->dev; + enum drm_connector_status old_status; + + mutex_lock(&dev->mode_config.mutex); + old_status = connector->status; + connector->status = status; + mutex_unlock(&dev->mode_config.mutex); + + if (old_status == status) + return; + + drm_bridge_connector_hpd_notify(connector, status); + + drm_kms_helper_hotplug_event(dev); +} + +/** + * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector + * @connector: The DRM bridge connector + * + * This function enables hot-plug detection for the given bridge connector. + * This is typically used by display drivers in their resume handler. + */ +void drm_bridge_connector_enable_hpd(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *hpd = bridge_connector->bridge_hpd; + + if (hpd) + drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb, + bridge_connector); +} +EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd); + +/** + * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the + * connector + * @connector: The DRM bridge connector + * + * This function disables hot-plug detection for the given bridge connector. + * This is typically used by display drivers in their suspend handler. + */ +void drm_bridge_connector_disable_hpd(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *hpd = bridge_connector->bridge_hpd; + + if (hpd) + drm_bridge_hpd_disable(hpd); +} +EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd); + +/* ----------------------------------------------------------------------------- + * Bridge Connector Functions + */ + +static enum drm_connector_status +drm_bridge_connector_detect(struct drm_connector *connector, bool force) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *detect = bridge_connector->bridge_detect; + enum drm_connector_status status; + + if (detect) { + status = detect->funcs->detect(detect); + + drm_bridge_connector_hpd_notify(connector, status); + } else { + switch (connector->connector_type) { + case DRM_MODE_CONNECTOR_DPI: + case DRM_MODE_CONNECTOR_LVDS: + case DRM_MODE_CONNECTOR_DSI: + case DRM_MODE_CONNECTOR_eDP: + status = connector_status_connected; + break; + default: + status = connector_status_unknown; + break; + } + } + + return status; +} + +static void drm_bridge_connector_destroy(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + + if (bridge_connector->bridge_hpd) { + struct drm_bridge *hpd = bridge_connector->bridge_hpd; + + drm_bridge_hpd_disable(hpd); + } + + drm_connector_unregister(connector); + drm_connector_cleanup(connector); + + kfree(bridge_connector); +} + +static void drm_bridge_connector_debugfs_init(struct drm_connector *connector, + struct dentry *root) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_encoder *encoder = bridge_connector->encoder; + struct drm_bridge *bridge; + + list_for_each_entry(bridge, &encoder->bridge_chain, chain_node) { + if (bridge->funcs->debugfs_init) + bridge->funcs->debugfs_init(bridge, root); + } +} + +static const struct drm_connector_funcs drm_bridge_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .detect = drm_bridge_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_bridge_connector_destroy, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .debugfs_init = drm_bridge_connector_debugfs_init, +}; + +/* ----------------------------------------------------------------------------- + * Bridge Connector Helper Functions + */ + +static int drm_bridge_connector_get_modes_edid(struct drm_connector *connector, + struct drm_bridge *bridge) +{ + enum drm_connector_status status; + struct edid *edid; + int n; + + status = drm_bridge_connector_detect(connector, false); + if (status != connector_status_connected) + goto no_edid; + + edid = bridge->funcs->get_edid(bridge, connector); + if (!drm_edid_is_valid(edid)) { + kfree(edid); + goto no_edid; + } + + drm_connector_update_edid_property(connector, edid); + n = drm_add_edid_modes(connector, edid); + + kfree(edid); + return n; + +no_edid: + drm_connector_update_edid_property(connector, NULL); + return 0; +} + +static int drm_bridge_connector_get_modes(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *bridge; + + /* + * If display exposes EDID, then we parse that in the normal way to + * build table of supported modes. + */ + bridge = bridge_connector->bridge_edid; + if (bridge) + return drm_bridge_connector_get_modes_edid(connector, bridge); + + /* + * Otherwise if the display pipeline reports modes (e.g. with a fixed + * resolution panel or an analog TV output), query it. + */ + bridge = bridge_connector->bridge_modes; + if (bridge) + return bridge->funcs->get_modes(bridge, connector); + + /* + * We can't retrieve modes, which can happen for instance for a DVI or + * VGA output with the DDC bus unconnected. The KMS core will add the + * default modes. + */ + return 0; +} + +static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = { + .get_modes = drm_bridge_connector_get_modes, + /* No need for .mode_valid(), the bridges are checked by the core. */ +}; + +/* ----------------------------------------------------------------------------- + * Bridge Connector Initialisation + */ + +/** + * drm_bridge_connector_init - Initialise a connector for a chain of bridges + * @drm: the DRM device + * @encoder: the encoder where the bridge chain starts + * + * Allocate, initialise and register a &drm_bridge_connector with the @drm + * device. The connector is associated with a chain of bridges that starts at + * the @encoder. All bridges in the chain shall report bridge operation flags + * (&drm_bridge->ops) and bridge output type (&drm_bridge->type), and none of + * them may create a DRM connector directly. + * + * Returns a pointer to the new connector on success, or a negative error + * pointer otherwise. + */ +struct drm_connector *drm_bridge_connector_init(struct drm_device *drm, + struct drm_encoder *encoder) +{ + struct drm_bridge_connector *bridge_connector; + struct drm_connector *connector; + struct i2c_adapter *ddc = NULL; + struct drm_bridge *bridge, *panel_bridge = NULL; + int connector_type; + + bridge_connector = kzalloc(sizeof(*bridge_connector), GFP_KERNEL); + if (!bridge_connector) + return ERR_PTR(-ENOMEM); + + bridge_connector->encoder = encoder; + + /* + * TODO: Handle doublescan_allowed, stereo_allowed and + * ycbcr_420_allowed. + */ + connector = &bridge_connector->base; + connector->interlace_allowed = true; + + /* + * Initialise connector status handling. First locate the furthest + * bridges in the pipeline that support HPD and output detection. Then + * initialise the connector polling mode, using HPD if available and + * falling back to polling if supported. If neither HPD nor output + * detection are available, we don't support hotplug detection at all. + */ + connector_type = DRM_MODE_CONNECTOR_Unknown; + drm_for_each_bridge_in_chain(encoder, bridge) { + if (!bridge->interlace_allowed) + connector->interlace_allowed = false; + + if (bridge->ops & DRM_BRIDGE_OP_EDID) + bridge_connector->bridge_edid = bridge; + if (bridge->ops & DRM_BRIDGE_OP_HPD) + bridge_connector->bridge_hpd = bridge; + if (bridge->ops & DRM_BRIDGE_OP_DETECT) + bridge_connector->bridge_detect = bridge; + if (bridge->ops & DRM_BRIDGE_OP_MODES) + bridge_connector->bridge_modes = bridge; + + if (!drm_bridge_get_next_bridge(bridge)) + connector_type = bridge->type; + + if (bridge->ddc) + ddc = bridge->ddc; + + if (drm_bridge_is_panel(bridge)) + panel_bridge = bridge; + } + + if (connector_type == DRM_MODE_CONNECTOR_Unknown) { + kfree(bridge_connector); + return ERR_PTR(-EINVAL); + } + + drm_connector_init_with_ddc(drm, connector, &drm_bridge_connector_funcs, + connector_type, ddc); + drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs); + + if (bridge_connector->bridge_hpd) { + connector->polled = DRM_CONNECTOR_POLL_HPD; + drm_bridge_connector_enable_hpd(connector); + } + else if (bridge_connector->bridge_detect) + connector->polled = DRM_CONNECTOR_POLL_CONNECT + | DRM_CONNECTOR_POLL_DISCONNECT; + + if (panel_bridge) + drm_panel_bridge_set_orientation(connector, panel_bridge); + + return connector; +} +EXPORT_SYMBOL_GPL(drm_bridge_connector_init); -- cgit v1.2.3