From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/drm_writeback.c | 468 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 468 insertions(+) create mode 100644 drivers/gpu/drm/drm_writeback.c (limited to 'drivers/gpu/drm/drm_writeback.c') diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c new file mode 100644 index 000000000..a031c335b --- /dev/null +++ b/drivers/gpu/drm/drm_writeback.c @@ -0,0 +1,468 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) COPYRIGHT 2016 ARM Limited. All rights reserved. + * Author: Brian Starkey + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms + * of such GNU licence. + */ + +#include + +#include +#include +#include +#include +#include +#include +#include + +/** + * DOC: overview + * + * Writeback connectors are used to expose hardware which can write the output + * from a CRTC to a memory buffer. They are used and act similarly to other + * types of connectors, with some important differences: + * + * * Writeback connectors don't provide a way to output visually to the user. + * + * * Writeback connectors are visible to userspace only when the client sets + * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS. + * + * * Writeback connectors don't have EDID. + * + * A framebuffer may only be attached to a writeback connector when the + * connector is attached to a CRTC. The WRITEBACK_FB_ID property which sets the + * framebuffer applies only to a single commit (see below). A framebuffer may + * not be attached while the CRTC is off. + * + * Unlike with planes, when a writeback framebuffer is removed by userspace DRM + * makes no attempt to remove it from active use by the connector. This is + * because no method is provided to abort a writeback operation, and in any + * case making a new commit whilst a writeback is ongoing is undefined (see + * WRITEBACK_OUT_FENCE_PTR below). As soon as the current writeback is finished, + * the framebuffer will automatically no longer be in active use. As it will + * also have already been removed from the framebuffer list, there will be no + * way for any userspace application to retrieve a reference to it in the + * intervening period. + * + * Writeback connectors have some additional properties, which userspace + * can use to query and control them: + * + * "WRITEBACK_FB_ID": + * Write-only object property storing a DRM_MODE_OBJECT_FB: it stores the + * framebuffer to be written by the writeback connector. This property is + * similar to the FB_ID property on planes, but will always read as zero + * and is not preserved across commits. + * Userspace must set this property to an output buffer every time it + * wishes the buffer to get filled. + * + * "WRITEBACK_PIXEL_FORMATS": + * Immutable blob property to store the supported pixel formats table. The + * data is an array of u32 DRM_FORMAT_* fourcc values. + * Userspace can use this blob to find out what pixel formats are supported + * by the connector's writeback engine. + * + * "WRITEBACK_OUT_FENCE_PTR": + * Userspace can use this property to provide a pointer for the kernel to + * fill with a sync_file file descriptor, which will signal once the + * writeback is finished. The value should be the address of a 32-bit + * signed integer, cast to a u64. + * Userspace should wait for this fence to signal before making another + * commit affecting any of the same CRTCs, Planes or Connectors. + * **Failure to do so will result in undefined behaviour.** + * For this reason it is strongly recommended that all userspace + * applications making use of writeback connectors *always* retrieve an + * out-fence for the commit and use it appropriately. + * From userspace, this property will always read as zero. + */ + +#define fence_to_wb_connector(x) container_of(x->lock, \ + struct drm_writeback_connector, \ + fence_lock) + +static const char *drm_writeback_fence_get_driver_name(struct dma_fence *fence) +{ + struct drm_writeback_connector *wb_connector = + fence_to_wb_connector(fence); + + return wb_connector->base.dev->driver->name; +} + +static const char * +drm_writeback_fence_get_timeline_name(struct dma_fence *fence) +{ + struct drm_writeback_connector *wb_connector = + fence_to_wb_connector(fence); + + return wb_connector->timeline_name; +} + +static bool drm_writeback_fence_enable_signaling(struct dma_fence *fence) +{ + return true; +} + +static const struct dma_fence_ops drm_writeback_fence_ops = { + .get_driver_name = drm_writeback_fence_get_driver_name, + .get_timeline_name = drm_writeback_fence_get_timeline_name, + .enable_signaling = drm_writeback_fence_enable_signaling, +}; + +static int create_writeback_properties(struct drm_device *dev) +{ + struct drm_property *prop; + + if (!dev->mode_config.writeback_fb_id_property) { + prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, + "WRITEBACK_FB_ID", + DRM_MODE_OBJECT_FB); + if (!prop) + return -ENOMEM; + dev->mode_config.writeback_fb_id_property = prop; + } + + if (!dev->mode_config.writeback_pixel_formats_property) { + prop = drm_property_create(dev, DRM_MODE_PROP_BLOB | + DRM_MODE_PROP_ATOMIC | + DRM_MODE_PROP_IMMUTABLE, + "WRITEBACK_PIXEL_FORMATS", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.writeback_pixel_formats_property = prop; + } + + if (!dev->mode_config.writeback_out_fence_ptr_property) { + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, + "WRITEBACK_OUT_FENCE_PTR", 0, + U64_MAX); + if (!prop) + return -ENOMEM; + dev->mode_config.writeback_out_fence_ptr_property = prop; + } + + return 0; +} + +static const struct drm_encoder_funcs drm_writeback_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +/** + * drm_writeback_connector_init - Initialize a writeback connector and its properties + * @dev: DRM device + * @wb_connector: Writeback connector to initialize + * @con_funcs: Connector funcs vtable + * @enc_helper_funcs: Encoder helper funcs vtable to be used by the internal encoder + * @formats: Array of supported pixel formats for the writeback engine + * @n_formats: Length of the formats array + * @possible_crtcs: possible crtcs for the internal writeback encoder + * + * This function creates the writeback-connector-specific properties if they + * have not been already created, initializes the connector as + * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property + * values. It will also create an internal encoder associated with the + * drm_writeback_connector and set it to use the @enc_helper_funcs vtable for + * the encoder helper. + * + * Drivers should always use this function instead of drm_connector_init() to + * set up writeback connectors. + * + * Returns: 0 on success, or a negative error code + */ +int drm_writeback_connector_init(struct drm_device *dev, + struct drm_writeback_connector *wb_connector, + const struct drm_connector_funcs *con_funcs, + const struct drm_encoder_helper_funcs *enc_helper_funcs, + const u32 *formats, int n_formats, + u32 possible_crtcs) +{ + int ret = 0; + + drm_encoder_helper_add(&wb_connector->encoder, enc_helper_funcs); + + wb_connector->encoder.possible_crtcs = possible_crtcs; + + ret = drm_encoder_init(dev, &wb_connector->encoder, + &drm_writeback_encoder_funcs, + DRM_MODE_ENCODER_VIRTUAL, NULL); + if (ret) + return ret; + + ret = drm_writeback_connector_init_with_encoder(dev, wb_connector, &wb_connector->encoder, + con_funcs, formats, n_formats); + + if (ret) + drm_encoder_cleanup(&wb_connector->encoder); + + return ret; +} +EXPORT_SYMBOL(drm_writeback_connector_init); + +/** + * drm_writeback_connector_init_with_encoder - Initialize a writeback connector with + * a custom encoder + * + * @dev: DRM device + * @wb_connector: Writeback connector to initialize + * @enc: handle to the already initialized drm encoder + * @con_funcs: Connector funcs vtable + * @formats: Array of supported pixel formats for the writeback engine + * @n_formats: Length of the formats array + * + * This function creates the writeback-connector-specific properties if they + * have not been already created, initializes the connector as + * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property + * values. + * + * This function assumes that the drm_writeback_connector's encoder has already been + * created and initialized before invoking this function. + * + * In addition, this function also assumes that callers of this API will manage + * assigning the encoder helper functions, possible_crtcs and any other encoder + * specific operation. + * + * Drivers should always use this function instead of drm_connector_init() to + * set up writeback connectors if they want to manage themselves the lifetime of the + * associated encoder. + * + * Returns: 0 on success, or a negative error code + */ +int drm_writeback_connector_init_with_encoder(struct drm_device *dev, + struct drm_writeback_connector *wb_connector, struct drm_encoder *enc, + const struct drm_connector_funcs *con_funcs, const u32 *formats, + int n_formats) +{ + struct drm_property_blob *blob; + struct drm_connector *connector = &wb_connector->base; + struct drm_mode_config *config = &dev->mode_config; + int ret = create_writeback_properties(dev); + + if (ret != 0) + return ret; + + blob = drm_property_create_blob(dev, n_formats * sizeof(*formats), + formats); + if (IS_ERR(blob)) + return PTR_ERR(blob); + + + connector->interlace_allowed = 0; + + ret = drm_connector_init(dev, connector, con_funcs, + DRM_MODE_CONNECTOR_WRITEBACK); + if (ret) + goto connector_fail; + + ret = drm_connector_attach_encoder(connector, enc); + if (ret) + goto attach_fail; + + INIT_LIST_HEAD(&wb_connector->job_queue); + spin_lock_init(&wb_connector->job_lock); + + wb_connector->fence_context = dma_fence_context_alloc(1); + spin_lock_init(&wb_connector->fence_lock); + snprintf(wb_connector->timeline_name, + sizeof(wb_connector->timeline_name), + "CONNECTOR:%d-%s", connector->base.id, connector->name); + + drm_object_attach_property(&connector->base, + config->writeback_out_fence_ptr_property, 0); + + drm_object_attach_property(&connector->base, + config->writeback_fb_id_property, 0); + + drm_object_attach_property(&connector->base, + config->writeback_pixel_formats_property, + blob->base.id); + wb_connector->pixel_formats_blob_ptr = blob; + + return 0; + +attach_fail: + drm_connector_cleanup(connector); +connector_fail: + drm_property_blob_put(blob); + return ret; +} +EXPORT_SYMBOL(drm_writeback_connector_init_with_encoder); + +int drm_writeback_set_fb(struct drm_connector_state *conn_state, + struct drm_framebuffer *fb) +{ + WARN_ON(conn_state->connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK); + + if (!conn_state->writeback_job) { + conn_state->writeback_job = + kzalloc(sizeof(*conn_state->writeback_job), GFP_KERNEL); + if (!conn_state->writeback_job) + return -ENOMEM; + + conn_state->writeback_job->connector = + drm_connector_to_writeback(conn_state->connector); + } + + drm_framebuffer_assign(&conn_state->writeback_job->fb, fb); + return 0; +} + +int drm_writeback_prepare_job(struct drm_writeback_job *job) +{ + struct drm_writeback_connector *connector = job->connector; + const struct drm_connector_helper_funcs *funcs = + connector->base.helper_private; + int ret; + + if (funcs->prepare_writeback_job) { + ret = funcs->prepare_writeback_job(connector, job); + if (ret < 0) + return ret; + } + + job->prepared = true; + return 0; +} +EXPORT_SYMBOL(drm_writeback_prepare_job); + +/** + * drm_writeback_queue_job - Queue a writeback job for later signalling + * @wb_connector: The writeback connector to queue a job on + * @conn_state: The connector state containing the job to queue + * + * This function adds the job contained in @conn_state to the job_queue for a + * writeback connector. It takes ownership of the writeback job and sets the + * @conn_state->writeback_job to NULL, and so no access to the job may be + * performed by the caller after this function returns. + * + * Drivers must ensure that for a given writeback connector, jobs are queued in + * exactly the same order as they will be completed by the hardware (and + * signaled via drm_writeback_signal_completion). + * + * For every call to drm_writeback_queue_job() there must be exactly one call to + * drm_writeback_signal_completion() + * + * See also: drm_writeback_signal_completion() + */ +void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector, + struct drm_connector_state *conn_state) +{ + struct drm_writeback_job *job; + unsigned long flags; + + job = conn_state->writeback_job; + conn_state->writeback_job = NULL; + + spin_lock_irqsave(&wb_connector->job_lock, flags); + list_add_tail(&job->list_entry, &wb_connector->job_queue); + spin_unlock_irqrestore(&wb_connector->job_lock, flags); +} +EXPORT_SYMBOL(drm_writeback_queue_job); + +void drm_writeback_cleanup_job(struct drm_writeback_job *job) +{ + struct drm_writeback_connector *connector = job->connector; + const struct drm_connector_helper_funcs *funcs = + connector->base.helper_private; + + if (job->prepared && funcs->cleanup_writeback_job) + funcs->cleanup_writeback_job(connector, job); + + if (job->fb) + drm_framebuffer_put(job->fb); + + if (job->out_fence) + dma_fence_put(job->out_fence); + + kfree(job); +} +EXPORT_SYMBOL(drm_writeback_cleanup_job); + +/* + * @cleanup_work: deferred cleanup of a writeback job + * + * The job cannot be cleaned up directly in drm_writeback_signal_completion, + * because it may be called in interrupt context. Dropping the framebuffer + * reference can sleep, and so the cleanup is deferred to a workqueue. + */ +static void cleanup_work(struct work_struct *work) +{ + struct drm_writeback_job *job = container_of(work, + struct drm_writeback_job, + cleanup_work); + + drm_writeback_cleanup_job(job); +} + +/** + * drm_writeback_signal_completion - Signal the completion of a writeback job + * @wb_connector: The writeback connector whose job is complete + * @status: Status code to set in the writeback out_fence (0 for success) + * + * Drivers should call this to signal the completion of a previously queued + * writeback job. It should be called as soon as possible after the hardware + * has finished writing, and may be called from interrupt context. + * It is the driver's responsibility to ensure that for a given connector, the + * hardware completes writeback jobs in the same order as they are queued. + * + * Unless the driver is holding its own reference to the framebuffer, it must + * not be accessed after calling this function. + * + * See also: drm_writeback_queue_job() + */ +void +drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector, + int status) +{ + unsigned long flags; + struct drm_writeback_job *job; + struct dma_fence *out_fence; + + spin_lock_irqsave(&wb_connector->job_lock, flags); + job = list_first_entry_or_null(&wb_connector->job_queue, + struct drm_writeback_job, + list_entry); + if (job) + list_del(&job->list_entry); + + spin_unlock_irqrestore(&wb_connector->job_lock, flags); + + if (WARN_ON(!job)) + return; + + out_fence = job->out_fence; + if (out_fence) { + if (status) + dma_fence_set_error(out_fence, status); + dma_fence_signal(out_fence); + dma_fence_put(out_fence); + job->out_fence = NULL; + } + + INIT_WORK(&job->cleanup_work, cleanup_work); + queue_work(system_long_wq, &job->cleanup_work); +} +EXPORT_SYMBOL(drm_writeback_signal_completion); + +struct dma_fence * +drm_writeback_get_out_fence(struct drm_writeback_connector *wb_connector) +{ + struct dma_fence *fence; + + if (WARN_ON(wb_connector->base.connector_type != + DRM_MODE_CONNECTOR_WRITEBACK)) + return NULL; + + fence = kzalloc(sizeof(*fence), GFP_KERNEL); + if (!fence) + return NULL; + + dma_fence_init(fence, &drm_writeback_fence_ops, + &wb_connector->fence_lock, wb_connector->fence_context, + ++wb_connector->fence_seqno); + + return fence; +} +EXPORT_SYMBOL(drm_writeback_get_out_fence); -- cgit v1.2.3