From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/exynos/exynos_drm_dma.c | 145 ++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 drivers/gpu/drm/exynos/exynos_drm_dma.c (limited to 'drivers/gpu/drm/exynos/exynos_drm_dma.c') diff --git a/drivers/gpu/drm/exynos/exynos_drm_dma.c b/drivers/gpu/drm/exynos/exynos_drm_dma.c new file mode 100644 index 000000000..a971590b8 --- /dev/null +++ b/drivers/gpu/drm/exynos/exynos_drm_dma.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2012 Samsung Electronics Co., Ltd. +// Author: Inki Dae +// Author: Andrzej Hajda + +#include +#include +#include + +#include +#include + +#include "exynos_drm_drv.h" + +#if defined(CONFIG_ARM_DMA_USE_IOMMU) +#include +#else +#define arm_iommu_create_mapping(...) ({ NULL; }) +#define arm_iommu_attach_device(...) ({ -ENODEV; }) +#define arm_iommu_release_mapping(...) ({ }) +#define arm_iommu_detach_device(...) ({ }) +#define to_dma_iommu_mapping(dev) NULL +#endif + +#if !defined(CONFIG_IOMMU_DMA) +#define iommu_dma_init_domain(...) ({ -EINVAL; }) +#endif + +#define EXYNOS_DEV_ADDR_START 0x20000000 +#define EXYNOS_DEV_ADDR_SIZE 0x40000000 + +/* + * drm_iommu_attach_device- attach device to iommu mapping + * + * @drm_dev: DRM device + * @subdrv_dev: device to be attach + * + * This function should be called by sub drivers to attach it to iommu + * mapping. + */ +static int drm_iommu_attach_device(struct drm_device *drm_dev, + struct device *subdrv_dev, void **dma_priv) +{ + struct exynos_drm_private *priv = drm_dev->dev_private; + int ret = 0; + + if (get_dma_ops(priv->dma_dev) != get_dma_ops(subdrv_dev)) { + DRM_DEV_ERROR(subdrv_dev, "Device %s lacks support for IOMMU\n", + dev_name(subdrv_dev)); + return -EINVAL; + } + + dma_set_max_seg_size(subdrv_dev, DMA_BIT_MASK(32)); + if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) { + /* + * Keep the original DMA mapping of the sub-device and + * restore it on Exynos DRM detach, otherwise the DMA + * framework considers it as IOMMU-less during the next + * probe (in case of deferred probe or modular build) + */ + *dma_priv = to_dma_iommu_mapping(subdrv_dev); + if (*dma_priv) + arm_iommu_detach_device(subdrv_dev); + + ret = arm_iommu_attach_device(subdrv_dev, priv->mapping); + } else if (IS_ENABLED(CONFIG_IOMMU_DMA)) { + ret = iommu_attach_device(priv->mapping, subdrv_dev); + } + + return ret; +} + +/* + * drm_iommu_detach_device -detach device address space mapping from device + * + * @drm_dev: DRM device + * @subdrv_dev: device to be detached + * + * This function should be called by sub drivers to detach it from iommu + * mapping + */ +static void drm_iommu_detach_device(struct drm_device *drm_dev, + struct device *subdrv_dev, void **dma_priv) +{ + struct exynos_drm_private *priv = drm_dev->dev_private; + + if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) { + arm_iommu_detach_device(subdrv_dev); + arm_iommu_attach_device(subdrv_dev, *dma_priv); + } else if (IS_ENABLED(CONFIG_IOMMU_DMA)) + iommu_detach_device(priv->mapping, subdrv_dev); +} + +int exynos_drm_register_dma(struct drm_device *drm, struct device *dev, + void **dma_priv) +{ + struct exynos_drm_private *priv = drm->dev_private; + + if (!priv->dma_dev) { + priv->dma_dev = dev; + DRM_INFO("Exynos DRM: using %s device for DMA mapping operations\n", + dev_name(dev)); + } + + if (!IS_ENABLED(CONFIG_EXYNOS_IOMMU)) + return 0; + + if (!priv->mapping) { + void *mapping; + + if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) + mapping = arm_iommu_create_mapping(&platform_bus_type, + EXYNOS_DEV_ADDR_START, EXYNOS_DEV_ADDR_SIZE); + else if (IS_ENABLED(CONFIG_IOMMU_DMA)) + mapping = iommu_get_domain_for_dev(priv->dma_dev); + else + mapping = ERR_PTR(-ENODEV); + + if (IS_ERR(mapping)) + return PTR_ERR(mapping); + priv->mapping = mapping; + } + + return drm_iommu_attach_device(drm, dev, dma_priv); +} + +void exynos_drm_unregister_dma(struct drm_device *drm, struct device *dev, + void **dma_priv) +{ + if (IS_ENABLED(CONFIG_EXYNOS_IOMMU)) + drm_iommu_detach_device(drm, dev, dma_priv); +} + +void exynos_drm_cleanup_dma(struct drm_device *drm) +{ + struct exynos_drm_private *priv = drm->dev_private; + + if (!IS_ENABLED(CONFIG_EXYNOS_IOMMU)) + return; + + arm_iommu_release_mapping(priv->mapping); + priv->mapping = NULL; + priv->dma_dev = NULL; +} -- cgit v1.2.3