From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/i2c/ch7006_mode.c | 470 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 470 insertions(+) create mode 100644 drivers/gpu/drm/i2c/ch7006_mode.c (limited to 'drivers/gpu/drm/i2c/ch7006_mode.c') diff --git a/drivers/gpu/drm/i2c/ch7006_mode.c b/drivers/gpu/drm/i2c/ch7006_mode.c new file mode 100644 index 000000000..6afe6d0ee --- /dev/null +++ b/drivers/gpu/drm/i2c/ch7006_mode.c @@ -0,0 +1,470 @@ +/* + * Copyright (C) 2009 Francisco Jerez. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sublicense, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial + * portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION + * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include "ch7006_priv.h" + +const char * const ch7006_tv_norm_names[] = { + [TV_NORM_PAL] = "PAL", + [TV_NORM_PAL_M] = "PAL-M", + [TV_NORM_PAL_N] = "PAL-N", + [TV_NORM_PAL_NC] = "PAL-Nc", + [TV_NORM_PAL_60] = "PAL-60", + [TV_NORM_NTSC_M] = "NTSC-M", + [TV_NORM_NTSC_J] = "NTSC-J", +}; + +#define NTSC_LIKE_TIMINGS .vrefresh = 60 * fixed1/1.001, \ + .vdisplay = 480, \ + .vtotal = 525, \ + .hvirtual = 660 + +#define PAL_LIKE_TIMINGS .vrefresh = 50 * fixed1, \ + .vdisplay = 576, \ + .vtotal = 625, \ + .hvirtual = 810 + +const struct ch7006_tv_norm_info ch7006_tv_norms[] = { + [TV_NORM_NTSC_M] = { + NTSC_LIKE_TIMINGS, + .black_level = 0.339 * fixed1, + .subc_freq = 3579545 * fixed1, + .dispmode = bitfs(CH7006_DISPMODE_OUTPUT_STD, NTSC), + .voffset = 0, + }, + [TV_NORM_NTSC_J] = { + NTSC_LIKE_TIMINGS, + .black_level = 0.286 * fixed1, + .subc_freq = 3579545 * fixed1, + .dispmode = bitfs(CH7006_DISPMODE_OUTPUT_STD, NTSC_J), + .voffset = 0, + }, + [TV_NORM_PAL] = { + PAL_LIKE_TIMINGS, + .black_level = 0.3 * fixed1, + .subc_freq = 4433618.75 * fixed1, + .dispmode = bitfs(CH7006_DISPMODE_OUTPUT_STD, PAL), + .voffset = 0, + }, + [TV_NORM_PAL_M] = { + NTSC_LIKE_TIMINGS, + .black_level = 0.339 * fixed1, + .subc_freq = 3575611.433 * fixed1, + .dispmode = bitfs(CH7006_DISPMODE_OUTPUT_STD, PAL_M), + .voffset = 16, + }, + + /* The following modes seem to work right but they're + * undocumented */ + + [TV_NORM_PAL_N] = { + PAL_LIKE_TIMINGS, + .black_level = 0.339 * fixed1, + .subc_freq = 4433618.75 * fixed1, + .dispmode = bitfs(CH7006_DISPMODE_OUTPUT_STD, PAL), + .voffset = 0, + }, + [TV_NORM_PAL_NC] = { + PAL_LIKE_TIMINGS, + .black_level = 0.3 * fixed1, + .subc_freq = 3582056.25 * fixed1, + .dispmode = bitfs(CH7006_DISPMODE_OUTPUT_STD, PAL), + .voffset = 0, + }, + [TV_NORM_PAL_60] = { + NTSC_LIKE_TIMINGS, + .black_level = 0.3 * fixed1, + .subc_freq = 4433618.75 * fixed1, + .dispmode = bitfs(CH7006_DISPMODE_OUTPUT_STD, PAL_M), + .voffset = 16, + }, +}; + +#define __MODE(f, hd, vd, ht, vt, hsynp, vsynp, \ + subc, scale, scale_mask, norm_mask, e_hd, e_vd) { \ + .mode = { \ + .name = #hd "x" #vd, \ + .status = 0, \ + .type = DRM_MODE_TYPE_DRIVER, \ + .clock = f, \ + .hdisplay = hd, \ + .hsync_start = e_hd + 16, \ + .hsync_end = e_hd + 80, \ + .htotal = ht, \ + .hskew = 0, \ + .vdisplay = vd, \ + .vsync_start = vd + 10, \ + .vsync_end = vd + 26, \ + .vtotal = vt, \ + .vscan = 0, \ + .flags = DRM_MODE_FLAG_##hsynp##HSYNC | \ + DRM_MODE_FLAG_##vsynp##VSYNC, \ + }, \ + .enc_hdisp = e_hd, \ + .enc_vdisp = e_vd, \ + .subc_coeff = subc * fixed1, \ + .dispmode = bitfs(CH7006_DISPMODE_SCALING_RATIO, scale) | \ + bitfs(CH7006_DISPMODE_INPUT_RES, e_hd##x##e_vd), \ + .valid_scales = scale_mask, \ + .valid_norms = norm_mask \ + } + +#define MODE(f, hd, vd, ht, vt, hsynp, vsynp, \ + subc, scale, scale_mask, norm_mask) \ + __MODE(f, hd, vd, ht, vt, hsynp, vsynp, subc, scale, \ + scale_mask, norm_mask, hd, vd) + +#define NTSC_LIKE (1 << TV_NORM_NTSC_M | 1 << TV_NORM_NTSC_J | \ + 1 << TV_NORM_PAL_M | 1 << TV_NORM_PAL_60) + +#define PAL_LIKE (1 << TV_NORM_PAL | 1 << TV_NORM_PAL_N | 1 << TV_NORM_PAL_NC) + +const struct ch7006_mode ch7006_modes[] = { + MODE(21000, 512, 384, 840, 500, N, N, 181.797557582, 5_4, 0x6, PAL_LIKE), + MODE(26250, 512, 384, 840, 625, N, N, 145.438046066, 1_1, 0x1, PAL_LIKE), + MODE(20140, 512, 384, 800, 420, N, N, 213.257083791, 5_4, 0x4, NTSC_LIKE), + MODE(24671, 512, 384, 784, 525, N, N, 174.0874153, 1_1, 0x3, NTSC_LIKE), + MODE(28125, 720, 400, 1125, 500, N, N, 135.742176298, 5_4, 0x6, PAL_LIKE), + MODE(34875, 720, 400, 1116, 625, N, N, 109.469496898, 1_1, 0x1, PAL_LIKE), + MODE(23790, 720, 400, 945, 420, N, N, 160.475642016, 5_4, 0x4, NTSC_LIKE), + MODE(29455, 720, 400, 936, 525, N, N, 129.614941843, 1_1, 0x3, NTSC_LIKE), + MODE(25000, 640, 400, 1000, 500, N, N, 152.709948279, 5_4, 0x6, PAL_LIKE), + MODE(31500, 640, 400, 1008, 625, N, N, 121.198371646, 1_1, 0x1, PAL_LIKE), + MODE(21147, 640, 400, 840, 420, N, N, 180.535097338, 5_4, 0x4, NTSC_LIKE), + MODE(26434, 640, 400, 840, 525, N, N, 144.42807787, 1_1, 0x2, NTSC_LIKE), + MODE(30210, 640, 400, 840, 600, N, N, 126.374568276, 7_8, 0x1, NTSC_LIKE), + MODE(21000, 640, 480, 840, 500, N, N, 181.797557582, 5_4, 0x4, PAL_LIKE), + MODE(26250, 640, 480, 840, 625, N, N, 145.438046066, 1_1, 0x2, PAL_LIKE), + MODE(31500, 640, 480, 840, 750, N, N, 121.198371646, 5_6, 0x1, PAL_LIKE), + MODE(24671, 640, 480, 784, 525, N, N, 174.0874153, 1_1, 0x4, NTSC_LIKE), + MODE(28196, 640, 480, 784, 600, N, N, 152.326488422, 7_8, 0x2, NTSC_LIKE), + MODE(30210, 640, 480, 800, 630, N, N, 142.171389101, 5_6, 0x1, NTSC_LIKE), + __MODE(29500, 720, 576, 944, 625, P, P, 145.592111636, 1_1, 0x7, PAL_LIKE, 800, 600), + MODE(36000, 800, 600, 960, 750, P, P, 119.304647022, 5_6, 0x6, PAL_LIKE), + MODE(39000, 800, 600, 936, 836, P, P, 110.127366499, 3_4, 0x1, PAL_LIKE), + MODE(39273, 800, 600, 1040, 630, P, P, 145.816809399, 5_6, 0x4, NTSC_LIKE), + MODE(43636, 800, 600, 1040, 700, P, P, 131.235128487, 3_4, 0x2, NTSC_LIKE), + MODE(47832, 800, 600, 1064, 750, P, P, 119.723275165, 7_10, 0x1, NTSC_LIKE), + {} +}; + +const struct ch7006_mode *ch7006_lookup_mode(struct drm_encoder *encoder, + const struct drm_display_mode *drm_mode) +{ + struct ch7006_priv *priv = to_ch7006_priv(encoder); + const struct ch7006_mode *mode; + + for (mode = ch7006_modes; mode->mode.clock; mode++) { + + if (~mode->valid_norms & 1<norm) + continue; + + if (mode->mode.hdisplay != drm_mode->hdisplay || + mode->mode.vdisplay != drm_mode->vdisplay || + mode->mode.vtotal != drm_mode->vtotal || + mode->mode.htotal != drm_mode->htotal || + mode->mode.clock != drm_mode->clock) + continue; + + return mode; + } + + return NULL; +} + +/* Some common HW state calculation code */ + +void ch7006_setup_levels(struct drm_encoder *encoder) +{ + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + struct ch7006_priv *priv = to_ch7006_priv(encoder); + uint8_t *regs = priv->state.regs; + const struct ch7006_tv_norm_info *norm = &ch7006_tv_norms[priv->norm]; + int gain; + int black_level; + + /* Set DAC_GAIN if the voltage drop between white and black is + * high enough. */ + if (norm->black_level < 339*fixed1/1000) { + gain = 76; + + regs[CH7006_INPUT_FORMAT] |= CH7006_INPUT_FORMAT_DAC_GAIN; + } else { + gain = 71; + + regs[CH7006_INPUT_FORMAT] &= ~CH7006_INPUT_FORMAT_DAC_GAIN; + } + + black_level = round_fixed(norm->black_level*26625)/gain; + + /* Correct it with the specified brightness. */ + black_level = interpolate(90, black_level, 208, priv->brightness); + + regs[CH7006_BLACK_LEVEL] = bitf(CH7006_BLACK_LEVEL_0, black_level); + + ch7006_dbg(client, "black level: %d\n", black_level); +} + +void ch7006_setup_subcarrier(struct drm_encoder *encoder) +{ + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + struct ch7006_priv *priv = to_ch7006_priv(encoder); + struct ch7006_state *state = &priv->state; + const struct ch7006_tv_norm_info *norm = &ch7006_tv_norms[priv->norm]; + const struct ch7006_mode *mode = priv->mode; + uint32_t subc_inc; + + subc_inc = round_fixed((mode->subc_coeff >> 8) + * (norm->subc_freq >> 24)); + + setbitf(state, CH7006_SUBC_INC0, 28, subc_inc); + setbitf(state, CH7006_SUBC_INC1, 24, subc_inc); + setbitf(state, CH7006_SUBC_INC2, 20, subc_inc); + setbitf(state, CH7006_SUBC_INC3, 16, subc_inc); + setbitf(state, CH7006_SUBC_INC4, 12, subc_inc); + setbitf(state, CH7006_SUBC_INC5, 8, subc_inc); + setbitf(state, CH7006_SUBC_INC6, 4, subc_inc); + setbitf(state, CH7006_SUBC_INC7, 0, subc_inc); + + ch7006_dbg(client, "subcarrier inc: %u\n", subc_inc); +} + +void ch7006_setup_pll(struct drm_encoder *encoder) +{ + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + struct ch7006_priv *priv = to_ch7006_priv(encoder); + uint8_t *regs = priv->state.regs; + const struct ch7006_mode *mode = priv->mode; + int n, best_n = 0; + int m, best_m = 0; + int freq, best_freq = 0; + + for (n = 0; n < CH7006_MAXN; n++) { + for (m = 0; m < CH7006_MAXM; m++) { + freq = CH7006_FREQ0*(n+2)/(m+2); + + if (abs(freq - mode->mode.clock) < + abs(best_freq - mode->mode.clock)) { + best_freq = freq; + best_n = n; + best_m = m; + } + } + } + + regs[CH7006_PLLOV] = bitf(CH7006_PLLOV_N_8, best_n) | + bitf(CH7006_PLLOV_M_8, best_m); + + regs[CH7006_PLLM] = bitf(CH7006_PLLM_0, best_m); + regs[CH7006_PLLN] = bitf(CH7006_PLLN_0, best_n); + + if (best_n < 108) + regs[CH7006_PLL_CONTROL] |= CH7006_PLL_CONTROL_CAPACITOR; + else + regs[CH7006_PLL_CONTROL] &= ~CH7006_PLL_CONTROL_CAPACITOR; + + ch7006_dbg(client, "n=%d m=%d f=%d c=%d\n", + best_n, best_m, best_freq, best_n < 108); +} + +void ch7006_setup_power_state(struct drm_encoder *encoder) +{ + struct ch7006_priv *priv = to_ch7006_priv(encoder); + uint8_t *power = &priv->state.regs[CH7006_POWER]; + int subconnector; + + subconnector = priv->select_subconnector ? priv->select_subconnector : + priv->subconnector; + + *power = CH7006_POWER_RESET; + + if (priv->last_dpms == DRM_MODE_DPMS_ON) { + switch (subconnector) { + case DRM_MODE_SUBCONNECTOR_SVIDEO: + *power |= bitfs(CH7006_POWER_LEVEL, CVBS_OFF); + break; + case DRM_MODE_SUBCONNECTOR_Composite: + *power |= bitfs(CH7006_POWER_LEVEL, SVIDEO_OFF); + break; + case DRM_MODE_SUBCONNECTOR_SCART: + *power |= bitfs(CH7006_POWER_LEVEL, NORMAL) | + CH7006_POWER_SCART; + break; + } + + } else { + if (priv->chip_version >= 0x20) + *power |= bitfs(CH7006_POWER_LEVEL, FULL_POWER_OFF); + else + *power |= bitfs(CH7006_POWER_LEVEL, POWER_OFF); + } +} + +void ch7006_setup_properties(struct drm_encoder *encoder) +{ + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + struct ch7006_priv *priv = to_ch7006_priv(encoder); + struct ch7006_state *state = &priv->state; + const struct ch7006_tv_norm_info *norm = &ch7006_tv_norms[priv->norm]; + const struct ch7006_mode *ch_mode = priv->mode; + const struct drm_display_mode *mode = &ch_mode->mode; + uint8_t *regs = state->regs; + int flicker, contrast, hpos, vpos; + uint64_t scale, aspect; + + flicker = interpolate(0, 2, 3, priv->flicker); + regs[CH7006_FFILTER] = bitf(CH7006_FFILTER_TEXT, flicker) | + bitf(CH7006_FFILTER_LUMA, flicker) | + bitf(CH7006_FFILTER_CHROMA, 1); + + contrast = interpolate(0, 5, 7, priv->contrast); + regs[CH7006_CONTRAST] = bitf(CH7006_CONTRAST_0, contrast); + + scale = norm->vtotal*fixed1; + do_div(scale, mode->vtotal); + + aspect = ch_mode->enc_hdisp*fixed1; + do_div(aspect, ch_mode->enc_vdisp); + + hpos = round_fixed((norm->hvirtual * aspect - mode->hdisplay * scale) + * priv->hmargin * mode->vtotal) / norm->vtotal / 100 / 4; + + setbitf(state, CH7006_POV, HPOS_8, hpos); + setbitf(state, CH7006_HPOS, 0, hpos); + + vpos = max(0, norm->vdisplay - round_fixed(mode->vdisplay*scale) + + norm->voffset) * priv->vmargin / 100 / 2; + + setbitf(state, CH7006_POV, VPOS_8, vpos); + setbitf(state, CH7006_VPOS, 0, vpos); + + ch7006_dbg(client, "hpos: %d, vpos: %d\n", hpos, vpos); +} + +/* HW access functions */ + +void ch7006_write(struct i2c_client *client, uint8_t addr, uint8_t val) +{ + uint8_t buf[] = {addr, val}; + int ret; + + ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); + if (ret < 0) + ch7006_err(client, "Error %d writing to subaddress 0x%x\n", + ret, addr); +} + +uint8_t ch7006_read(struct i2c_client *client, uint8_t addr) +{ + uint8_t val; + int ret; + + ret = i2c_master_send(client, &addr, sizeof(addr)); + if (ret < 0) + goto fail; + + ret = i2c_master_recv(client, &val, sizeof(val)); + if (ret < 0) + goto fail; + + return val; + +fail: + ch7006_err(client, "Error %d reading from subaddress 0x%x\n", + ret, addr); + return 0; +} + +void ch7006_state_load(struct i2c_client *client, + struct ch7006_state *state) +{ + ch7006_load_reg(client, state, CH7006_POWER); + + ch7006_load_reg(client, state, CH7006_DISPMODE); + ch7006_load_reg(client, state, CH7006_FFILTER); + ch7006_load_reg(client, state, CH7006_BWIDTH); + ch7006_load_reg(client, state, CH7006_INPUT_FORMAT); + ch7006_load_reg(client, state, CH7006_CLKMODE); + ch7006_load_reg(client, state, CH7006_START_ACTIVE); + ch7006_load_reg(client, state, CH7006_POV); + ch7006_load_reg(client, state, CH7006_BLACK_LEVEL); + ch7006_load_reg(client, state, CH7006_HPOS); + ch7006_load_reg(client, state, CH7006_VPOS); + ch7006_load_reg(client, state, CH7006_INPUT_SYNC); + ch7006_load_reg(client, state, CH7006_DETECT); + ch7006_load_reg(client, state, CH7006_CONTRAST); + ch7006_load_reg(client, state, CH7006_PLLOV); + ch7006_load_reg(client, state, CH7006_PLLM); + ch7006_load_reg(client, state, CH7006_PLLN); + ch7006_load_reg(client, state, CH7006_BCLKOUT); + ch7006_load_reg(client, state, CH7006_SUBC_INC0); + ch7006_load_reg(client, state, CH7006_SUBC_INC1); + ch7006_load_reg(client, state, CH7006_SUBC_INC2); + ch7006_load_reg(client, state, CH7006_SUBC_INC3); + ch7006_load_reg(client, state, CH7006_SUBC_INC4); + ch7006_load_reg(client, state, CH7006_SUBC_INC5); + ch7006_load_reg(client, state, CH7006_SUBC_INC6); + ch7006_load_reg(client, state, CH7006_SUBC_INC7); + ch7006_load_reg(client, state, CH7006_PLL_CONTROL); + ch7006_load_reg(client, state, CH7006_CALC_SUBC_INC0); +} + +void ch7006_state_save(struct i2c_client *client, + struct ch7006_state *state) +{ + ch7006_save_reg(client, state, CH7006_POWER); + + ch7006_save_reg(client, state, CH7006_DISPMODE); + ch7006_save_reg(client, state, CH7006_FFILTER); + ch7006_save_reg(client, state, CH7006_BWIDTH); + ch7006_save_reg(client, state, CH7006_INPUT_FORMAT); + ch7006_save_reg(client, state, CH7006_CLKMODE); + ch7006_save_reg(client, state, CH7006_START_ACTIVE); + ch7006_save_reg(client, state, CH7006_POV); + ch7006_save_reg(client, state, CH7006_BLACK_LEVEL); + ch7006_save_reg(client, state, CH7006_HPOS); + ch7006_save_reg(client, state, CH7006_VPOS); + ch7006_save_reg(client, state, CH7006_INPUT_SYNC); + ch7006_save_reg(client, state, CH7006_DETECT); + ch7006_save_reg(client, state, CH7006_CONTRAST); + ch7006_save_reg(client, state, CH7006_PLLOV); + ch7006_save_reg(client, state, CH7006_PLLM); + ch7006_save_reg(client, state, CH7006_PLLN); + ch7006_save_reg(client, state, CH7006_BCLKOUT); + ch7006_save_reg(client, state, CH7006_SUBC_INC0); + ch7006_save_reg(client, state, CH7006_SUBC_INC1); + ch7006_save_reg(client, state, CH7006_SUBC_INC2); + ch7006_save_reg(client, state, CH7006_SUBC_INC3); + ch7006_save_reg(client, state, CH7006_SUBC_INC4); + ch7006_save_reg(client, state, CH7006_SUBC_INC5); + ch7006_save_reg(client, state, CH7006_SUBC_INC6); + ch7006_save_reg(client, state, CH7006_SUBC_INC7); + ch7006_save_reg(client, state, CH7006_PLL_CONTROL); + ch7006_save_reg(client, state, CH7006_CALC_SUBC_INC0); + + state->regs[CH7006_FFILTER] = (state->regs[CH7006_FFILTER] & 0xf0) | + (state->regs[CH7006_FFILTER] & 0x0c) >> 2 | + (state->regs[CH7006_FFILTER] & 0x03) << 2; +} -- cgit v1.2.3