From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/i2c/tda9950.c | 508 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 508 insertions(+) create mode 100644 drivers/gpu/drm/i2c/tda9950.c (limited to 'drivers/gpu/drm/i2c/tda9950.c') diff --git a/drivers/gpu/drm/i2c/tda9950.c b/drivers/gpu/drm/i2c/tda9950.c new file mode 100644 index 000000000..9ed54e7cc --- /dev/null +++ b/drivers/gpu/drm/i2c/tda9950.c @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TDA9950 Consumer Electronics Control driver + * + * The NXP TDA9950 implements the HDMI Consumer Electronics Control + * interface. The host interface is similar to a mailbox: the data + * registers starting at REG_CDR0 are written to send a command to the + * internal CPU, and replies are read from these registers. + * + * As the data registers represent a mailbox, they must be accessed + * as a single I2C transaction. See the TDA9950 data sheet for details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +enum { + REG_CSR = 0x00, + CSR_BUSY = BIT(7), + CSR_INT = BIT(6), + CSR_ERR = BIT(5), + + REG_CER = 0x01, + + REG_CVR = 0x02, + + REG_CCR = 0x03, + CCR_RESET = BIT(7), + CCR_ON = BIT(6), + + REG_ACKH = 0x04, + REG_ACKL = 0x05, + + REG_CCONR = 0x06, + CCONR_ENABLE_ERROR = BIT(4), + CCONR_RETRY_MASK = 7, + + REG_CDR0 = 0x07, + + CDR1_REQ = 0x00, + CDR1_CNF = 0x01, + CDR1_IND = 0x81, + CDR1_ERR = 0x82, + CDR1_IER = 0x83, + + CDR2_CNF_SUCCESS = 0x00, + CDR2_CNF_OFF_STATE = 0x80, + CDR2_CNF_BAD_REQ = 0x81, + CDR2_CNF_CEC_ACCESS = 0x82, + CDR2_CNF_ARB_ERROR = 0x83, + CDR2_CNF_BAD_TIMING = 0x84, + CDR2_CNF_NACK_ADDR = 0x85, + CDR2_CNF_NACK_DATA = 0x86, +}; + +struct tda9950_priv { + struct i2c_client *client; + struct device *hdmi; + struct cec_adapter *adap; + struct tda9950_glue *glue; + u16 addresses; + struct cec_msg rx_msg; + struct cec_notifier *notify; + bool open; +}; + +static int tda9950_write_range(struct i2c_client *client, u8 addr, u8 *p, int cnt) +{ + struct i2c_msg msg; + u8 buf[CEC_MAX_MSG_SIZE + 3]; + int ret; + + if (WARN_ON(cnt > sizeof(buf) - 1)) + return -EINVAL; + + buf[0] = addr; + memcpy(buf + 1, p, cnt); + + msg.addr = client->addr; + msg.flags = 0; + msg.len = cnt + 1; + msg.buf = buf; + + dev_dbg(&client->dev, "wr 0x%02x: %*ph\n", addr, cnt, p); + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) + dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr); + return ret < 0 ? ret : 0; +} + +static void tda9950_write(struct i2c_client *client, u8 addr, u8 val) +{ + tda9950_write_range(client, addr, &val, 1); +} + +static int tda9950_read_range(struct i2c_client *client, u8 addr, u8 *p, int cnt) +{ + struct i2c_msg msg[2]; + int ret; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = &addr; + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = cnt; + msg[1].buf = p; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) + dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr); + + dev_dbg(&client->dev, "rd 0x%02x: %*ph\n", addr, cnt, p); + + return ret; +} + +static u8 tda9950_read(struct i2c_client *client, u8 addr) +{ + int ret; + u8 val; + + ret = tda9950_read_range(client, addr, &val, 1); + if (ret < 0) + val = 0; + + return val; +} + +static irqreturn_t tda9950_irq(int irq, void *data) +{ + struct tda9950_priv *priv = data; + unsigned int tx_status; + u8 csr, cconr, buf[19]; + u8 arb_lost_cnt, nack_cnt, err_cnt; + + if (!priv->open) + return IRQ_NONE; + + csr = tda9950_read(priv->client, REG_CSR); + if (!(csr & CSR_INT)) + return IRQ_NONE; + + cconr = tda9950_read(priv->client, REG_CCONR) & CCONR_RETRY_MASK; + + tda9950_read_range(priv->client, REG_CDR0, buf, sizeof(buf)); + + /* + * This should never happen: the data sheet says that there will + * always be a valid message if the interrupt line is asserted. + */ + if (buf[0] == 0) { + dev_warn(&priv->client->dev, "interrupt pending, but no message?\n"); + return IRQ_NONE; + } + + switch (buf[1]) { + case CDR1_CNF: /* transmit result */ + arb_lost_cnt = nack_cnt = err_cnt = 0; + switch (buf[2]) { + case CDR2_CNF_SUCCESS: + tx_status = CEC_TX_STATUS_OK; + break; + + case CDR2_CNF_ARB_ERROR: + tx_status = CEC_TX_STATUS_ARB_LOST; + arb_lost_cnt = cconr; + break; + + case CDR2_CNF_NACK_ADDR: + tx_status = CEC_TX_STATUS_NACK; + nack_cnt = cconr; + break; + + default: /* some other error, refer to TDA9950 docs */ + dev_err(&priv->client->dev, "CNF reply error 0x%02x\n", + buf[2]); + tx_status = CEC_TX_STATUS_ERROR; + err_cnt = cconr; + break; + } + /* TDA9950 executes all retries for us */ + if (tx_status != CEC_TX_STATUS_OK) + tx_status |= CEC_TX_STATUS_MAX_RETRIES; + cec_transmit_done(priv->adap, tx_status, arb_lost_cnt, + nack_cnt, 0, err_cnt); + break; + + case CDR1_IND: + priv->rx_msg.len = buf[0] - 2; + if (priv->rx_msg.len > CEC_MAX_MSG_SIZE) + priv->rx_msg.len = CEC_MAX_MSG_SIZE; + + memcpy(priv->rx_msg.msg, buf + 2, priv->rx_msg.len); + cec_received_msg(priv->adap, &priv->rx_msg); + break; + + default: /* unknown */ + dev_err(&priv->client->dev, "unknown service id 0x%02x\n", + buf[1]); + break; + } + + return IRQ_HANDLED; +} + +static int tda9950_cec_transmit(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg) +{ + struct tda9950_priv *priv = adap->priv; + u8 buf[CEC_MAX_MSG_SIZE + 2]; + + buf[0] = 2 + msg->len; + buf[1] = CDR1_REQ; + memcpy(buf + 2, msg->msg, msg->len); + + if (attempts > 5) + attempts = 5; + + tda9950_write(priv->client, REG_CCONR, attempts); + + return tda9950_write_range(priv->client, REG_CDR0, buf, 2 + msg->len); +} + +static int tda9950_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) +{ + struct tda9950_priv *priv = adap->priv; + u16 addresses; + u8 buf[2]; + + if (addr == CEC_LOG_ADDR_INVALID) + addresses = priv->addresses = 0; + else + addresses = priv->addresses |= BIT(addr); + + /* TDA9950 doesn't want address 15 set */ + addresses &= 0x7fff; + buf[0] = addresses >> 8; + buf[1] = addresses; + + return tda9950_write_range(priv->client, REG_ACKH, buf, 2); +} + +/* + * When operating as part of the TDA998x, we need additional handling + * to initialise and shut down the TDA9950 part of the device. These + * two hooks are provided to allow the TDA998x code to perform those + * activities. + */ +static int tda9950_glue_open(struct tda9950_priv *priv) +{ + int ret = 0; + + if (priv->glue && priv->glue->open) + ret = priv->glue->open(priv->glue->data); + + priv->open = true; + + return ret; +} + +static void tda9950_glue_release(struct tda9950_priv *priv) +{ + priv->open = false; + + if (priv->glue && priv->glue->release) + priv->glue->release(priv->glue->data); +} + +static int tda9950_open(struct tda9950_priv *priv) +{ + struct i2c_client *client = priv->client; + int ret; + + ret = tda9950_glue_open(priv); + if (ret) + return ret; + + /* Reset the TDA9950, and wait 250ms for it to recover */ + tda9950_write(client, REG_CCR, CCR_RESET); + msleep(250); + + tda9950_cec_adap_log_addr(priv->adap, CEC_LOG_ADDR_INVALID); + + /* Start the command processor */ + tda9950_write(client, REG_CCR, CCR_ON); + + return 0; +} + +static void tda9950_release(struct tda9950_priv *priv) +{ + struct i2c_client *client = priv->client; + int timeout = 50; + u8 csr; + + /* Stop the command processor */ + tda9950_write(client, REG_CCR, 0); + + /* Wait up to .5s for it to signal non-busy */ + do { + csr = tda9950_read(client, REG_CSR); + if (!(csr & CSR_BUSY) || !--timeout) + break; + msleep(10); + } while (1); + + /* Warn the user that their IRQ may die if it's shared. */ + if (csr & CSR_BUSY) + dev_warn(&client->dev, "command processor failed to stop, irq%d may die (csr=0x%02x)\n", + client->irq, csr); + + tda9950_glue_release(priv); +} + +static int tda9950_cec_adap_enable(struct cec_adapter *adap, bool enable) +{ + struct tda9950_priv *priv = adap->priv; + + if (!enable) { + tda9950_release(priv); + return 0; + } else { + return tda9950_open(priv); + } +} + +static const struct cec_adap_ops tda9950_cec_ops = { + .adap_enable = tda9950_cec_adap_enable, + .adap_log_addr = tda9950_cec_adap_log_addr, + .adap_transmit = tda9950_cec_transmit, +}; + +/* + * When operating as part of the TDA998x, we need to claim additional + * resources. These two hooks permit the management of those resources. + */ +static void tda9950_devm_glue_exit(void *data) +{ + struct tda9950_glue *glue = data; + + if (glue && glue->exit) + glue->exit(glue->data); +} + +static int tda9950_devm_glue_init(struct device *dev, struct tda9950_glue *glue) +{ + int ret; + + if (glue && glue->init) { + ret = glue->init(glue->data); + if (ret) + return ret; + } + + ret = devm_add_action(dev, tda9950_devm_glue_exit, glue); + if (ret) + tda9950_devm_glue_exit(glue); + + return ret; +} + +static void tda9950_cec_del(void *data) +{ + struct tda9950_priv *priv = data; + + cec_delete_adapter(priv->adap); +} + +static int tda9950_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tda9950_glue *glue = client->dev.platform_data; + struct device *dev = &client->dev; + struct tda9950_priv *priv; + unsigned long irqflags; + int ret; + u8 cvr; + + /* + * We must have I2C functionality: our multi-byte accesses + * must be performed as a single contiguous transaction. + */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, + "adapter does not support I2C functionality\n"); + return -ENXIO; + } + + /* We must have an interrupt to be functional. */ + if (client->irq <= 0) { + dev_err(&client->dev, "driver requires an interrupt\n"); + return -ENXIO; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + priv->glue = glue; + + i2c_set_clientdata(client, priv); + + /* + * If we're part of a TDA998x, we want the class devices to be + * associated with the HDMI Tx so we have a tight relationship + * between the HDMI interface and the CEC interface. + */ + priv->hdmi = dev; + if (glue && glue->parent) + priv->hdmi = glue->parent; + + priv->adap = cec_allocate_adapter(&tda9950_cec_ops, priv, "tda9950", + CEC_CAP_DEFAULTS | + CEC_CAP_CONNECTOR_INFO, + CEC_MAX_LOG_ADDRS); + if (IS_ERR(priv->adap)) + return PTR_ERR(priv->adap); + + ret = devm_add_action(dev, tda9950_cec_del, priv); + if (ret) { + cec_delete_adapter(priv->adap); + return ret; + } + + ret = tda9950_devm_glue_init(dev, glue); + if (ret) + return ret; + + ret = tda9950_glue_open(priv); + if (ret) + return ret; + + cvr = tda9950_read(client, REG_CVR); + + dev_info(&client->dev, + "TDA9950 CEC interface, hardware version %u.%u\n", + cvr >> 4, cvr & 15); + + tda9950_glue_release(priv); + + irqflags = IRQF_TRIGGER_FALLING; + if (glue) + irqflags = glue->irq_flags; + + ret = devm_request_threaded_irq(dev, client->irq, NULL, tda9950_irq, + irqflags | IRQF_SHARED | IRQF_ONESHOT, + dev_name(&client->dev), priv); + if (ret < 0) + return ret; + + priv->notify = cec_notifier_cec_adap_register(priv->hdmi, NULL, + priv->adap); + if (!priv->notify) + return -ENOMEM; + + ret = cec_register_adapter(priv->adap, priv->hdmi); + if (ret < 0) { + cec_notifier_cec_adap_unregister(priv->notify, priv->adap); + return ret; + } + + /* + * CEC documentation says we must not call cec_delete_adapter + * after a successful call to cec_register_adapter(). + */ + devm_remove_action(dev, tda9950_cec_del, priv); + + return 0; +} + +static void tda9950_remove(struct i2c_client *client) +{ + struct tda9950_priv *priv = i2c_get_clientdata(client); + + cec_notifier_cec_adap_unregister(priv->notify, priv->adap); + cec_unregister_adapter(priv->adap); +} + +static struct i2c_device_id tda9950_ids[] = { + { "tda9950", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tda9950_ids); + +static struct i2c_driver tda9950_driver = { + .probe = tda9950_probe, + .remove = tda9950_remove, + .driver = { + .name = "tda9950", + }, + .id_table = tda9950_ids, +}; + +module_i2c_driver(tda9950_driver); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("TDA9950/TDA998x Consumer Electronics Control Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3