From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/i915/display/intel_lpe_audio.c | 369 +++++++++++++++++++++++++ 1 file changed, 369 insertions(+) create mode 100644 drivers/gpu/drm/i915/display/intel_lpe_audio.c (limited to 'drivers/gpu/drm/i915/display/intel_lpe_audio.c') diff --git a/drivers/gpu/drm/i915/display/intel_lpe_audio.c b/drivers/gpu/drm/i915/display/intel_lpe_audio.c new file mode 100644 index 000000000..8aaaef4d7 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_lpe_audio.c @@ -0,0 +1,369 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Pierre-Louis Bossart + * Jerome Anand + * based on VED patches + * + */ + +/** + * DOC: LPE Audio integration for HDMI or DP playback + * + * Motivation: + * Atom platforms (e.g. valleyview and cherryTrail) integrates a DMA-based + * interface as an alternative to the traditional HDaudio path. While this + * mode is unrelated to the LPE aka SST audio engine, the documentation refers + * to this mode as LPE so we keep this notation for the sake of consistency. + * + * The interface is handled by a separate standalone driver maintained in the + * ALSA subsystem for simplicity. To minimize the interaction between the two + * subsystems, a bridge is setup between the hdmi-lpe-audio and i915: + * 1. Create a platform device to share MMIO/IRQ resources + * 2. Make the platform device child of i915 device for runtime PM. + * 3. Create IRQ chip to forward the LPE audio irqs. + * the hdmi-lpe-audio driver probes the lpe audio device and creates a new + * sound card + * + * Threats: + * Due to the restriction in Linux platform device model, user need manually + * uninstall the hdmi-lpe-audio driver before uninstalling i915 module, + * otherwise we might run into use-after-free issues after i915 removes the + * platform device: even though hdmi-lpe-audio driver is released, the modules + * is still in "installed" status. + * + * Implementation: + * The MMIO/REG platform resources are created according to the registers + * specification. + * When forwarding LPE audio irqs, the flow control handler selection depends + * on the platform, for example on valleyview handle_simple_irq is enough. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "i915_drv.h" +#include "i915_irq.h" +#include "i915_reg.h" +#include "intel_de.h" +#include "intel_lpe_audio.h" +#include "intel_pci_config.h" + +#define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->display.audio.lpe.platdev != NULL) + +static struct platform_device * +lpe_audio_platdev_create(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); + struct platform_device_info pinfo = {}; + struct resource *rsc; + struct platform_device *platdev; + struct intel_hdmi_lpe_audio_pdata *pdata; + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + rsc = kcalloc(2, sizeof(*rsc), GFP_KERNEL); + if (!rsc) { + kfree(pdata); + return ERR_PTR(-ENOMEM); + } + + rsc[0].start = rsc[0].end = dev_priv->display.audio.lpe.irq; + rsc[0].flags = IORESOURCE_IRQ; + rsc[0].name = "hdmi-lpe-audio-irq"; + + rsc[1].start = pci_resource_start(pdev, GEN4_GTTMMADR_BAR) + + I915_HDMI_LPE_AUDIO_BASE; + rsc[1].end = pci_resource_start(pdev, GEN4_GTTMMADR_BAR) + + I915_HDMI_LPE_AUDIO_BASE + I915_HDMI_LPE_AUDIO_SIZE - 1; + rsc[1].flags = IORESOURCE_MEM; + rsc[1].name = "hdmi-lpe-audio-mmio"; + + pinfo.parent = dev_priv->drm.dev; + pinfo.name = "hdmi-lpe-audio"; + pinfo.id = -1; + pinfo.res = rsc; + pinfo.num_res = 2; + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + pinfo.dma_mask = DMA_BIT_MASK(32); + + pdata->num_pipes = INTEL_NUM_PIPES(dev_priv); + pdata->num_ports = IS_CHERRYVIEW(dev_priv) ? 3 : 2; /* B,C,D or B,C */ + pdata->port[0].pipe = -1; + pdata->port[1].pipe = -1; + pdata->port[2].pipe = -1; + spin_lock_init(&pdata->lpe_audio_slock); + + platdev = platform_device_register_full(&pinfo); + kfree(rsc); + kfree(pdata); + + if (IS_ERR(platdev)) { + drm_err(&dev_priv->drm, + "Failed to allocate LPE audio platform device\n"); + return platdev; + } + + pm_runtime_no_callbacks(&platdev->dev); + + return platdev; +} + +static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv) +{ + /* XXX Note that platform_device_register_full() allocates a dma_mask + * and never frees it. We can't free it here as we cannot guarantee + * this is the last reference (i.e. that the dma_mask will not be + * used after our unregister). So ee choose to leak the sizeof(u64) + * allocation here - it should be fixed in the platform_device rather + * than us fiddle with its internals. + */ + + platform_device_unregister(dev_priv->display.audio.lpe.platdev); +} + +static void lpe_audio_irq_unmask(struct irq_data *d) +{ +} + +static void lpe_audio_irq_mask(struct irq_data *d) +{ +} + +static struct irq_chip lpe_audio_irqchip = { + .name = "hdmi_lpe_audio_irqchip", + .irq_mask = lpe_audio_irq_mask, + .irq_unmask = lpe_audio_irq_unmask, +}; + +static int lpe_audio_irq_init(struct drm_i915_private *dev_priv) +{ + int irq = dev_priv->display.audio.lpe.irq; + + drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv)); + irq_set_chip_and_handler_name(irq, + &lpe_audio_irqchip, + handle_simple_irq, + "hdmi_lpe_audio_irq_handler"); + + return irq_set_chip_data(irq, dev_priv); +} + +static bool lpe_audio_detect(struct drm_i915_private *dev_priv) +{ + int lpe_present = false; + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + static const struct pci_device_id atom_hdaudio_ids[] = { + /* Baytrail */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0f04)}, + /* Braswell */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2284)}, + {} + }; + + if (!pci_dev_present(atom_hdaudio_ids)) { + drm_info(&dev_priv->drm, + "HDaudio controller not detected, using LPE audio instead\n"); + lpe_present = true; + } + } + return lpe_present; +} + +static int lpe_audio_setup(struct drm_i915_private *dev_priv) +{ + int ret; + + dev_priv->display.audio.lpe.irq = irq_alloc_desc(0); + if (dev_priv->display.audio.lpe.irq < 0) { + drm_err(&dev_priv->drm, "Failed to allocate IRQ desc: %d\n", + dev_priv->display.audio.lpe.irq); + ret = dev_priv->display.audio.lpe.irq; + goto err; + } + + drm_dbg(&dev_priv->drm, "irq = %d\n", dev_priv->display.audio.lpe.irq); + + ret = lpe_audio_irq_init(dev_priv); + + if (ret) { + drm_err(&dev_priv->drm, + "Failed to initialize irqchip for lpe audio: %d\n", + ret); + goto err_free_irq; + } + + dev_priv->display.audio.lpe.platdev = lpe_audio_platdev_create(dev_priv); + + if (IS_ERR(dev_priv->display.audio.lpe.platdev)) { + ret = PTR_ERR(dev_priv->display.audio.lpe.platdev); + drm_err(&dev_priv->drm, + "Failed to create lpe audio platform device: %d\n", + ret); + goto err_free_irq; + } + + /* enable chicken bit; at least this is required for Dell Wyse 3040 + * with DP outputs (but only sometimes by some reason!) + */ + intel_de_write(dev_priv, VLV_AUD_CHICKEN_BIT_REG, + VLV_CHICKEN_BIT_DBG_ENABLE); + + return 0; +err_free_irq: + irq_free_desc(dev_priv->display.audio.lpe.irq); +err: + dev_priv->display.audio.lpe.irq = -1; + dev_priv->display.audio.lpe.platdev = NULL; + return ret; +} + +/** + * intel_lpe_audio_irq_handler() - forwards the LPE audio irq + * @dev_priv: the i915 drm device private data + * + * the LPE Audio irq is forwarded to the irq handler registered by LPE audio + * driver. + */ +void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv) +{ + int ret; + + if (!HAS_LPE_AUDIO(dev_priv)) + return; + + ret = generic_handle_irq(dev_priv->display.audio.lpe.irq); + if (ret) + drm_err_ratelimited(&dev_priv->drm, + "error handling LPE audio irq: %d\n", ret); +} + +/** + * intel_lpe_audio_init() - detect and setup the bridge between HDMI LPE Audio + * driver and i915 + * @dev_priv: the i915 drm device private data + * + * Return: 0 if successful. non-zero if detection or + * llocation/initialization fails + */ +int intel_lpe_audio_init(struct drm_i915_private *dev_priv) +{ + int ret = -ENODEV; + + if (lpe_audio_detect(dev_priv)) { + ret = lpe_audio_setup(dev_priv); + if (ret < 0) + drm_err(&dev_priv->drm, + "failed to setup LPE Audio bridge\n"); + } + return ret; +} + +/** + * intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE + * audio driver and i915 + * @dev_priv: the i915 drm device private data + * + * release all the resources for LPE audio <-> i915 bridge. + */ +void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) +{ + if (!HAS_LPE_AUDIO(dev_priv)) + return; + + lpe_audio_platdev_destroy(dev_priv); + + irq_free_desc(dev_priv->display.audio.lpe.irq); + + dev_priv->display.audio.lpe.irq = -1; + dev_priv->display.audio.lpe.platdev = NULL; +} + +/** + * intel_lpe_audio_notify() - notify lpe audio event + * audio driver and i915 + * @dev_priv: the i915 drm device private data + * @pipe: pipe + * @port: port + * @eld : ELD data + * @ls_clock: Link symbol clock in kHz + * @dp_output: Driving a DP output? + * + * Notify lpe audio driver of eld change. + */ +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, + enum pipe pipe, enum port port, + const void *eld, int ls_clock, bool dp_output) +{ + unsigned long irqflags; + struct intel_hdmi_lpe_audio_pdata *pdata; + struct intel_hdmi_lpe_audio_port_pdata *ppdata; + u32 audio_enable; + + if (!HAS_LPE_AUDIO(dev_priv)) + return; + + pdata = dev_get_platdata(&dev_priv->display.audio.lpe.platdev->dev); + ppdata = &pdata->port[port - PORT_B]; + + spin_lock_irqsave(&pdata->lpe_audio_slock, irqflags); + + audio_enable = intel_de_read(dev_priv, VLV_AUD_PORT_EN_DBG(port)); + + if (eld != NULL) { + memcpy(ppdata->eld, eld, HDMI_MAX_ELD_BYTES); + ppdata->pipe = pipe; + ppdata->ls_clock = ls_clock; + ppdata->dp_output = dp_output; + + /* Unmute the amp for both DP and HDMI */ + intel_de_write(dev_priv, VLV_AUD_PORT_EN_DBG(port), + audio_enable & ~VLV_AMP_MUTE); + } else { + memset(ppdata->eld, 0, HDMI_MAX_ELD_BYTES); + ppdata->pipe = -1; + ppdata->ls_clock = 0; + ppdata->dp_output = false; + + /* Mute the amp for both DP and HDMI */ + intel_de_write(dev_priv, VLV_AUD_PORT_EN_DBG(port), + audio_enable | VLV_AMP_MUTE); + } + + if (pdata->notify_audio_lpe) + pdata->notify_audio_lpe(dev_priv->display.audio.lpe.platdev, port - PORT_B); + + spin_unlock_irqrestore(&pdata->lpe_audio_slock, irqflags); +} -- cgit v1.2.3