From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/i915/gt/intel_renderstate.c | 252 ++++++++++++++++++++++++++++ 1 file changed, 252 insertions(+) create mode 100644 drivers/gpu/drm/i915/gt/intel_renderstate.c (limited to 'drivers/gpu/drm/i915/gt/intel_renderstate.c') diff --git a/drivers/gpu/drm/i915/gt/intel_renderstate.c b/drivers/gpu/drm/i915/gt/intel_renderstate.c new file mode 100644 index 000000000..9c1ae070e --- /dev/null +++ b/drivers/gpu/drm/i915/gt/intel_renderstate.c @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2014 Intel Corporation + */ + +#include "gem/i915_gem_internal.h" + +#include "i915_drv.h" +#include "intel_renderstate.h" +#include "intel_context.h" +#include "intel_gpu_commands.h" +#include "intel_ring.h" + +static const struct intel_renderstate_rodata * +render_state_get_rodata(const struct intel_engine_cs *engine) +{ + if (engine->class != RENDER_CLASS) + return NULL; + + switch (GRAPHICS_VER(engine->i915)) { + case 6: + return &gen6_null_state; + case 7: + return &gen7_null_state; + case 8: + return &gen8_null_state; + case 9: + return &gen9_null_state; + } + + return NULL; +} + +/* + * Macro to add commands to auxiliary batch. + * This macro only checks for page overflow before inserting the commands, + * this is sufficient as the null state generator makes the final batch + * with two passes to build command and state separately. At this point + * the size of both are known and it compacts them by relocating the state + * right after the commands taking care of alignment so we should sufficient + * space below them for adding new commands. + */ +#define OUT_BATCH(batch, i, val) \ + do { \ + if ((i) >= PAGE_SIZE / sizeof(u32)) \ + goto out; \ + (batch)[(i)++] = (val); \ + } while (0) + +static int render_state_setup(struct intel_renderstate *so, + struct drm_i915_private *i915) +{ + const struct intel_renderstate_rodata *rodata = so->rodata; + unsigned int i = 0, reloc_index = 0; + int ret = -EINVAL; + u32 *d; + + d = i915_gem_object_pin_map(so->vma->obj, I915_MAP_WB); + if (IS_ERR(d)) + return PTR_ERR(d); + + while (i < rodata->batch_items) { + u32 s = rodata->batch[i]; + + if (i * 4 == rodata->reloc[reloc_index]) { + u64 r = s + so->vma->node.start; + + s = lower_32_bits(r); + if (HAS_64BIT_RELOC(i915)) { + if (i + 1 >= rodata->batch_items || + rodata->batch[i + 1] != 0) + goto out; + + d[i++] = s; + s = upper_32_bits(r); + } + + reloc_index++; + } + + d[i++] = s; + } + + if (rodata->reloc[reloc_index] != -1) { + drm_err(&i915->drm, "only %d relocs resolved\n", reloc_index); + goto out; + } + + so->batch_offset = i915_ggtt_offset(so->vma); + so->batch_size = rodata->batch_items * sizeof(u32); + + while (i % CACHELINE_DWORDS) + OUT_BATCH(d, i, MI_NOOP); + + so->aux_offset = i * sizeof(u32); + + if (HAS_POOLED_EU(i915)) { + /* + * We always program 3x6 pool config but depending upon which + * subslice is disabled HW drops down to appropriate config + * shown below. + * + * In the below table 2x6 config always refers to + * fused-down version, native 2x6 is not available and can + * be ignored + * + * SNo subslices config eu pool configuration + * ----------------------------------------------------------- + * 1 3 subslices enabled (3x6) - 0x00777000 (9+9) + * 2 ss0 disabled (2x6) - 0x00777000 (3+9) + * 3 ss1 disabled (2x6) - 0x00770000 (6+6) + * 4 ss2 disabled (2x6) - 0x00007000 (9+3) + */ + u32 eu_pool_config = 0x00777000; + + OUT_BATCH(d, i, GEN9_MEDIA_POOL_STATE); + OUT_BATCH(d, i, GEN9_MEDIA_POOL_ENABLE); + OUT_BATCH(d, i, eu_pool_config); + OUT_BATCH(d, i, 0); + OUT_BATCH(d, i, 0); + OUT_BATCH(d, i, 0); + } + + OUT_BATCH(d, i, MI_BATCH_BUFFER_END); + so->aux_size = i * sizeof(u32) - so->aux_offset; + so->aux_offset += so->batch_offset; + /* + * Since we are sending length, we need to strictly conform to + * all requirements. For Gen2 this must be a multiple of 8. + */ + so->aux_size = ALIGN(so->aux_size, 8); + + ret = 0; +out: + __i915_gem_object_flush_map(so->vma->obj, 0, i * sizeof(u32)); + __i915_gem_object_release_map(so->vma->obj); + return ret; +} + +#undef OUT_BATCH + +int intel_renderstate_init(struct intel_renderstate *so, + struct intel_context *ce) +{ + struct intel_engine_cs *engine = ce->engine; + struct drm_i915_gem_object *obj = NULL; + int err; + + memset(so, 0, sizeof(*so)); + + so->rodata = render_state_get_rodata(engine); + if (so->rodata) { + if (so->rodata->batch_items * 4 > PAGE_SIZE) + return -EINVAL; + + obj = i915_gem_object_create_internal(engine->i915, PAGE_SIZE); + if (IS_ERR(obj)) + return PTR_ERR(obj); + + so->vma = i915_vma_instance(obj, &engine->gt->ggtt->vm, NULL); + if (IS_ERR(so->vma)) { + err = PTR_ERR(so->vma); + goto err_obj; + } + } + + i915_gem_ww_ctx_init(&so->ww, true); +retry: + err = intel_context_pin_ww(ce, &so->ww); + if (err) + goto err_fini; + + /* return early if there's nothing to setup */ + if (!err && !so->rodata) + return 0; + + err = i915_gem_object_lock(so->vma->obj, &so->ww); + if (err) + goto err_context; + + err = i915_vma_pin_ww(so->vma, &so->ww, 0, 0, PIN_GLOBAL | PIN_HIGH); + if (err) + goto err_context; + + err = render_state_setup(so, engine->i915); + if (err) + goto err_unpin; + + return 0; + +err_unpin: + i915_vma_unpin(so->vma); +err_context: + intel_context_unpin(ce); +err_fini: + if (err == -EDEADLK) { + err = i915_gem_ww_ctx_backoff(&so->ww); + if (!err) + goto retry; + } + i915_gem_ww_ctx_fini(&so->ww); +err_obj: + if (obj) + i915_gem_object_put(obj); + so->vma = NULL; + return err; +} + +int intel_renderstate_emit(struct intel_renderstate *so, + struct i915_request *rq) +{ + struct intel_engine_cs *engine = rq->engine; + int err; + + if (!so->vma) + return 0; + + err = i915_vma_move_to_active(so->vma, rq, 0); + if (err) + return err; + + err = engine->emit_bb_start(rq, + so->batch_offset, so->batch_size, + I915_DISPATCH_SECURE); + if (err) + return err; + + if (so->aux_size > 8) { + err = engine->emit_bb_start(rq, + so->aux_offset, so->aux_size, + I915_DISPATCH_SECURE); + if (err) + return err; + } + + return 0; +} + +void intel_renderstate_fini(struct intel_renderstate *so, + struct intel_context *ce) +{ + if (so->vma) { + i915_vma_unpin(so->vma); + i915_vma_close(so->vma); + } + + intel_context_unpin(ce); + i915_gem_ww_ctx_fini(&so->ww); + + if (so->vma) + i915_gem_object_put(so->vma->obj); +} -- cgit v1.2.3