From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 403 +++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h (limited to 'drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h') diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h new file mode 100644 index 000000000..f2af07d87 --- /dev/null +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h @@ -0,0 +1,403 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. + */ + +#ifndef __DPU_ENCODER_PHYS_H__ +#define __DPU_ENCODER_PHYS_H__ + +#include +#include + +#include "dpu_kms.h" +#include "dpu_hw_intf.h" +#include "dpu_hw_wb.h" +#include "dpu_hw_pingpong.h" +#include "dpu_hw_ctl.h" +#include "dpu_hw_top.h" +#include "dpu_encoder.h" +#include "dpu_crtc.h" + +#define DPU_ENCODER_NAME_MAX 16 + +/* wait for at most 2 vsync for lowest refresh rate (24hz) */ +#define KICKOFF_TIMEOUT_MS 84 +#define KICKOFF_TIMEOUT_JIFFIES msecs_to_jiffies(KICKOFF_TIMEOUT_MS) + +/** + * enum dpu_enc_split_role - Role this physical encoder will play in a + * split-panel configuration, where one panel is master, and others slaves. + * Masters have extra responsibilities, like managing the VBLANK IRQ. + * @ENC_ROLE_SOLO: This is the one and only panel. This encoder is master. + * @ENC_ROLE_MASTER: This encoder is the master of a split panel config. + * @ENC_ROLE_SLAVE: This encoder is not the master of a split panel config. + */ +enum dpu_enc_split_role { + ENC_ROLE_SOLO, + ENC_ROLE_MASTER, + ENC_ROLE_SLAVE, +}; + +/** + * enum dpu_enc_enable_state - current enabled state of the physical encoder + * @DPU_ENC_DISABLING: Encoder transitioning to disable state + * Events bounding transition are encoder type specific + * @DPU_ENC_DISABLED: Encoder is disabled + * @DPU_ENC_ENABLING: Encoder transitioning to enabled + * Events bounding transition are encoder type specific + * @DPU_ENC_ENABLED: Encoder is enabled + * @DPU_ENC_ERR_NEEDS_HW_RESET: Encoder is enabled, but requires a hw_reset + * to recover from a previous error + */ +enum dpu_enc_enable_state { + DPU_ENC_DISABLING, + DPU_ENC_DISABLED, + DPU_ENC_ENABLING, + DPU_ENC_ENABLED, + DPU_ENC_ERR_NEEDS_HW_RESET +}; + +struct dpu_encoder_phys; + +/** + * struct dpu_encoder_virt_ops - Interface the containing virtual encoder + * provides for the physical encoders to use to callback. + * @handle_vblank_virt: Notify virtual encoder of vblank IRQ reception + * Note: This is called from IRQ handler context. + * @handle_underrun_virt: Notify virtual encoder of underrun IRQ reception + * Note: This is called from IRQ handler context. + * @handle_frame_done: Notify virtual encoder that this phys encoder + * completes last request frame. + */ +struct dpu_encoder_virt_ops { + void (*handle_vblank_virt)(struct drm_encoder *, + struct dpu_encoder_phys *phys); + void (*handle_underrun_virt)(struct drm_encoder *, + struct dpu_encoder_phys *phys); + void (*handle_frame_done)(struct drm_encoder *, + struct dpu_encoder_phys *phys, u32 event); +}; + +/** + * struct dpu_encoder_phys_ops - Interface the physical encoders provide to + * the containing virtual encoder. + * @late_register: DRM Call. Add Userspace interfaces, debugfs. + * @prepare_commit: MSM Atomic Call, start of atomic commit sequence + * @is_master: Whether this phys_enc is the current master + * encoder. Can be switched at enable time. Based + * on split_role and current mode (CMD/VID). + * @atomic_mode_set: DRM Call. Set a DRM mode. + * This likely caches the mode, for use at enable. + * @enable: DRM Call. Enable a DRM mode. + * @disable: DRM Call. Disable mode. + * @atomic_check: DRM Call. Atomic check new DRM state. + * @destroy: DRM Call. Destroy and release resources. + * @control_vblank_irq Register/Deregister for VBLANK IRQ + * @wait_for_commit_done: Wait for hardware to have flushed the + * current pending frames to hardware + * @wait_for_tx_complete: Wait for hardware to transfer the pixels + * to the panel + * @wait_for_vblank: Wait for VBLANK, for sub-driver internal use + * @prepare_for_kickoff: Do any work necessary prior to a kickoff + * For CMD encoder, may wait for previous tx done + * @handle_post_kickoff: Do any work necessary post-kickoff work + * @trigger_start: Process start event on physical encoder + * @needs_single_flush: Whether encoder slaves need to be flushed + * @irq_control: Handler to enable/disable all the encoder IRQs + * @prepare_idle_pc: phys encoder can update the vsync_enable status + * on idle power collapse prepare + * @restore: Restore all the encoder configs. + * @get_line_count: Obtain current vertical line count + */ + +struct dpu_encoder_phys_ops { + int (*late_register)(struct dpu_encoder_phys *encoder, + struct dentry *debugfs_root); + void (*prepare_commit)(struct dpu_encoder_phys *encoder); + bool (*is_master)(struct dpu_encoder_phys *encoder); + void (*atomic_mode_set)(struct dpu_encoder_phys *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state); + void (*enable)(struct dpu_encoder_phys *encoder); + void (*disable)(struct dpu_encoder_phys *encoder); + int (*atomic_check)(struct dpu_encoder_phys *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state); + void (*destroy)(struct dpu_encoder_phys *encoder); + int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable); + int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc); + int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc); + int (*wait_for_vblank)(struct dpu_encoder_phys *phys_enc); + void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc); + void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc); + void (*trigger_start)(struct dpu_encoder_phys *phys_enc); + bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc); + void (*irq_control)(struct dpu_encoder_phys *phys, bool enable); + void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc); + void (*restore)(struct dpu_encoder_phys *phys); + int (*get_line_count)(struct dpu_encoder_phys *phys); + int (*get_frame_count)(struct dpu_encoder_phys *phys); + void (*prepare_wb_job)(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job); + void (*cleanup_wb_job)(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job); + bool (*is_valid_for_commit)(struct dpu_encoder_phys *phys_enc); +}; + +/** + * enum dpu_intr_idx - dpu encoder interrupt index + * @INTR_IDX_VSYNC: Vsync interrupt for video mode panel + * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel + * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel + * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector + */ +enum dpu_intr_idx { + INTR_IDX_VSYNC, + INTR_IDX_PINGPONG, + INTR_IDX_UNDERRUN, + INTR_IDX_CTL_START, + INTR_IDX_RDPTR, + INTR_IDX_WB_DONE, + INTR_IDX_MAX, +}; + +/** + * struct dpu_encoder_phys - physical encoder that drives a single INTF block + * tied to a specific panel / sub-panel. Abstract type, sub-classed by + * phys_vid or phys_cmd for video mode or command mode encs respectively. + * @parent: Pointer to the containing virtual encoder + * @ops: Operations exposed to the virtual encoder + * @parent_ops: Callbacks exposed by the parent to the phys_enc + * @hw_mdptop: Hardware interface to the top registers + * @hw_ctl: Hardware interface to the ctl registers + * @hw_pp: Hardware interface to the ping pong registers + * @hw_intf: Hardware interface to the intf registers + * @hw_wb: Hardware interface to the wb registers + * @dpu_kms: Pointer to the dpu_kms top level + * @cached_mode: DRM mode cached at mode_set time, acted on in enable + * @enabled: Whether the encoder has enabled and running a mode + * @split_role: Role to play in a split-panel configuration + * @intf_mode: Interface mode + * @intf_idx: Interface index on dpu hardware + * @wb_idx: Writeback index on dpu hardware + * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes + * @enable_state: Enable state tracking + * @vblank_refcount: Reference count of vblank request + * @vsync_cnt: Vsync count for the physical encoder + * @underrun_cnt: Underrun count for the physical encoder + * @pending_kickoff_cnt: Atomic counter tracking the number of kickoffs + * vs. the number of done/vblank irqs. Should hover + * between 0-2 Incremented when a new kickoff is + * scheduled. Decremented in irq handler + * @pending_ctlstart_cnt: Atomic counter tracking the number of ctl start + * pending. + * @pending_kickoff_wq: Wait queue for blocking until kickoff completes + * @irq: IRQ indices + */ +struct dpu_encoder_phys { + struct drm_encoder *parent; + struct dpu_encoder_phys_ops ops; + const struct dpu_encoder_virt_ops *parent_ops; + struct dpu_hw_mdp *hw_mdptop; + struct dpu_hw_ctl *hw_ctl; + struct dpu_hw_pingpong *hw_pp; + struct dpu_hw_intf *hw_intf; + struct dpu_hw_wb *hw_wb; + struct dpu_kms *dpu_kms; + struct drm_display_mode cached_mode; + enum dpu_enc_split_role split_role; + enum dpu_intf_mode intf_mode; + enum dpu_intf intf_idx; + enum dpu_wb wb_idx; + spinlock_t *enc_spinlock; + enum dpu_enc_enable_state enable_state; + atomic_t vblank_refcount; + atomic_t vsync_cnt; + atomic_t underrun_cnt; + atomic_t pending_ctlstart_cnt; + atomic_t pending_kickoff_cnt; + wait_queue_head_t pending_kickoff_wq; + int irq[INTR_IDX_MAX]; +}; + +static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) +{ + atomic_inc_return(&phys->pending_ctlstart_cnt); + return atomic_inc_return(&phys->pending_kickoff_cnt); +} + +/** + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to handle command + * mode specific operations + * @base: Baseclass physical encoder structure + * @wbirq_refcount: Reference count of writeback interrupt + * @wb_done_timeout_cnt: number of wb done irq timeout errors + * @wb_cfg: writeback block config to store fb related details + * @wb_conn: backpointer to writeback connector + * @wb_job: backpointer to current writeback job + * @dest: dpu buffer layout for current writeback output buffer + */ +struct dpu_encoder_phys_wb { + struct dpu_encoder_phys base; + atomic_t wbirq_refcount; + int wb_done_timeout_cnt; + struct dpu_hw_wb_cfg wb_cfg; + struct drm_writeback_connector *wb_conn; + struct drm_writeback_job *wb_job; + struct dpu_hw_fmt_layout dest; +}; + +/** + * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command + * mode specific operations + * @base: Baseclass physical encoder structure + * @intf_idx: Intf Block index used by this phys encoder + * @stream_sel: Stream selection for multi-stream interfaces + * @serialize_wait4pp: serialize wait4pp feature waits for pp_done interrupt + * after ctl_start instead of before next frame kickoff + * @pp_timeout_report_cnt: number of pingpong done irq timeout errors + * @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK + * @pending_vblank_wq: Wait queue for blocking until VBLANK received + */ +struct dpu_encoder_phys_cmd { + struct dpu_encoder_phys base; + int stream_sel; + bool serialize_wait4pp; + int pp_timeout_report_cnt; + atomic_t pending_vblank_cnt; + wait_queue_head_t pending_vblank_wq; +}; + +/** + * struct dpu_enc_phys_init_params - initialization parameters for phys encs + * @dpu_kms: Pointer to the dpu_kms top level + * @parent: Pointer to the containing virtual encoder + * @parent_ops: Callbacks exposed by the parent to the phys_enc + * @split_role: Role to play in a split-panel configuration + * @intf_idx: Interface index this phys_enc will control + * @wb_idx: Writeback index this phys_enc will control + * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes + */ +struct dpu_enc_phys_init_params { + struct dpu_kms *dpu_kms; + struct drm_encoder *parent; + const struct dpu_encoder_virt_ops *parent_ops; + enum dpu_enc_split_role split_role; + enum dpu_intf intf_idx; + enum dpu_wb wb_idx; + spinlock_t *enc_spinlock; +}; + +/** + * dpu_encoder_wait_info - container for passing arguments to irq wait functions + * @wq: wait queue structure + * @atomic_cnt: wait until atomic_cnt equals zero + * @timeout_ms: timeout value in milliseconds + */ +struct dpu_encoder_wait_info { + wait_queue_head_t *wq; + atomic_t *atomic_cnt; + s64 timeout_ms; +}; + +/** + * dpu_encoder_phys_vid_init - Construct a new video mode physical encoder + * @p: Pointer to init params structure + * Return: Error code or newly allocated encoder + */ +struct dpu_encoder_phys *dpu_encoder_phys_vid_init( + struct dpu_enc_phys_init_params *p); + +/** + * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder + * @p: Pointer to init params structure + * Return: Error code or newly allocated encoder + */ +struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( + struct dpu_enc_phys_init_params *p); + +/** + * dpu_encoder_phys_wb_init - initialize writeback encoder + * @init: Pointer to init info structure with initialization params + */ +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( + struct dpu_enc_phys_init_params *p); + +/** + * dpu_encoder_helper_trigger_start - control start helper function + * This helper function may be optionally specified by physical + * encoders if they require ctl_start triggering. + * @phys_enc: Pointer to physical encoder structure + */ +void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc); + +static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_crtc_state *dpu_cstate; + + if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING) + return BLEND_3D_NONE; + + dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state); + + /* Use merge_3d unless DSC MERGE topology is used */ + if (phys_enc->split_role == ENC_ROLE_SOLO && + dpu_cstate->num_mixers == CRTC_DUAL_MIXERS && + !dpu_encoder_use_dsc_merge(phys_enc->parent)) + return BLEND_3D_H_ROW_INT; + + return BLEND_3D_NONE; +} + +/** + * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder + * This helper function is used by physical encoder to get DSC blocks mask + * used for this encoder. + * @phys_enc: Pointer to physical encoder structure + */ +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc); + +/** + * dpu_encoder_helper_split_config - split display configuration helper function + * This helper function may be used by physical encoders to configure + * the split display related registers. + * @phys_enc: Pointer to physical encoder structure + * @interface: enum dpu_intf setting + */ +void dpu_encoder_helper_split_config( + struct dpu_encoder_phys *phys_enc, + enum dpu_intf interface); + +/** + * dpu_encoder_helper_report_irq_timeout - utility to report error that irq has + * timed out, including reporting frame error event to crtc and debug dump + * @phys_enc: Pointer to physical encoder structure + * @intr_idx: Failing interrupt index + */ +void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc, + enum dpu_intr_idx intr_idx); + +/** + * dpu_encoder_helper_wait_for_irq - utility to wait on an irq. + * note: will call dpu_encoder_helper_wait_for_irq on timeout + * @phys_enc: Pointer to physical encoder structure + * @irq: IRQ index + * @func: IRQ callback to be called in case of timeout + * @wait_info: wait info struct + * @Return: 0 or -ERROR + */ +int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, + int irq, + void (*func)(void *arg, int irq_idx), + struct dpu_encoder_wait_info *wait_info); + +/** + * dpu_encoder_helper_phys_cleanup - helper to cleanup dpu pipeline + * @phys_enc: Pointer to physical encoder structure + */ +void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc); + +#endif /* __dpu_encoder_phys_H__ */ -- cgit v1.2.3