From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/omapdrm/dss/hdmi.h | 385 +++++++++++++++++++++++++++++++++++++ 1 file changed, 385 insertions(+) create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi.h (limited to 'drivers/gpu/drm/omapdrm/dss/hdmi.h') diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi.h b/drivers/gpu/drm/omapdrm/dss/hdmi.h new file mode 100644 index 000000000..c4a4e07f0 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/dss/hdmi.h @@ -0,0 +1,385 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * HDMI driver definition for TI OMAP4 Processor. + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#ifndef _HDMI_H +#define _HDMI_H + +#include +#include +#include +#include +#include +#include +#include + +#include "omapdss.h" +#include "dss.h" + +struct dss_device; + +/* HDMI Wrapper */ + +#define HDMI_WP_REVISION 0x0 +#define HDMI_WP_SYSCONFIG 0x10 +#define HDMI_WP_IRQSTATUS_RAW 0x24 +#define HDMI_WP_IRQSTATUS 0x28 +#define HDMI_WP_IRQENABLE_SET 0x2C +#define HDMI_WP_IRQENABLE_CLR 0x30 +#define HDMI_WP_IRQWAKEEN 0x34 +#define HDMI_WP_PWR_CTRL 0x40 +#define HDMI_WP_DEBOUNCE 0x44 +#define HDMI_WP_VIDEO_CFG 0x50 +#define HDMI_WP_VIDEO_SIZE 0x60 +#define HDMI_WP_VIDEO_TIMING_H 0x68 +#define HDMI_WP_VIDEO_TIMING_V 0x6C +#define HDMI_WP_CLK 0x70 +#define HDMI_WP_AUDIO_CFG 0x80 +#define HDMI_WP_AUDIO_CFG2 0x84 +#define HDMI_WP_AUDIO_CTRL 0x88 +#define HDMI_WP_AUDIO_DATA 0x8C + +/* HDMI WP IRQ flags */ +#define HDMI_IRQ_CORE (1 << 0) +#define HDMI_IRQ_OCP_TIMEOUT (1 << 4) +#define HDMI_IRQ_AUDIO_FIFO_UNDERFLOW (1 << 8) +#define HDMI_IRQ_AUDIO_FIFO_OVERFLOW (1 << 9) +#define HDMI_IRQ_AUDIO_FIFO_SAMPLE_REQ (1 << 10) +#define HDMI_IRQ_VIDEO_VSYNC (1 << 16) +#define HDMI_IRQ_VIDEO_FRAME_DONE (1 << 17) +#define HDMI_IRQ_PHY_LINE5V_ASSERT (1 << 24) +#define HDMI_IRQ_LINK_CONNECT (1 << 25) +#define HDMI_IRQ_LINK_DISCONNECT (1 << 26) +#define HDMI_IRQ_PLL_LOCK (1 << 29) +#define HDMI_IRQ_PLL_UNLOCK (1 << 30) +#define HDMI_IRQ_PLL_RECAL (1 << 31) + +/* HDMI PLL */ + +#define PLLCTRL_PLL_CONTROL 0x0 +#define PLLCTRL_PLL_STATUS 0x4 +#define PLLCTRL_PLL_GO 0x8 +#define PLLCTRL_CFG1 0xC +#define PLLCTRL_CFG2 0x10 +#define PLLCTRL_CFG3 0x14 +#define PLLCTRL_SSC_CFG1 0x18 +#define PLLCTRL_SSC_CFG2 0x1C +#define PLLCTRL_CFG4 0x20 + +/* HDMI PHY */ + +#define HDMI_TXPHY_TX_CTRL 0x0 +#define HDMI_TXPHY_DIGITAL_CTRL 0x4 +#define HDMI_TXPHY_POWER_CTRL 0x8 +#define HDMI_TXPHY_PAD_CFG_CTRL 0xC +#define HDMI_TXPHY_BIST_CONTROL 0x1C + +enum hdmi_pll_pwr { + HDMI_PLLPWRCMD_ALLOFF = 0, + HDMI_PLLPWRCMD_PLLONLY = 1, + HDMI_PLLPWRCMD_BOTHON_ALLCLKS = 2, + HDMI_PLLPWRCMD_BOTHON_NOPHYCLK = 3 +}; + +enum hdmi_phy_pwr { + HDMI_PHYPWRCMD_OFF = 0, + HDMI_PHYPWRCMD_LDOON = 1, + HDMI_PHYPWRCMD_TXON = 2 +}; + +enum hdmi_core_hdmi_dvi { + HDMI_DVI = 0, + HDMI_HDMI = 1 +}; + +enum hdmi_packing_mode { + HDMI_PACK_10b_RGB_YUV444 = 0, + HDMI_PACK_24b_RGB_YUV444_YUV422 = 1, + HDMI_PACK_20b_YUV422 = 2, + HDMI_PACK_ALREADYPACKED = 7 +}; + +enum hdmi_stereo_channels { + HDMI_AUDIO_STEREO_NOCHANNELS = 0, + HDMI_AUDIO_STEREO_ONECHANNEL = 1, + HDMI_AUDIO_STEREO_TWOCHANNELS = 2, + HDMI_AUDIO_STEREO_THREECHANNELS = 3, + HDMI_AUDIO_STEREO_FOURCHANNELS = 4 +}; + +enum hdmi_audio_type { + HDMI_AUDIO_TYPE_LPCM = 0, + HDMI_AUDIO_TYPE_IEC = 1 +}; + +enum hdmi_audio_justify { + HDMI_AUDIO_JUSTIFY_LEFT = 0, + HDMI_AUDIO_JUSTIFY_RIGHT = 1 +}; + +enum hdmi_audio_sample_order { + HDMI_AUDIO_SAMPLE_RIGHT_FIRST = 0, + HDMI_AUDIO_SAMPLE_LEFT_FIRST = 1 +}; + +enum hdmi_audio_samples_perword { + HDMI_AUDIO_ONEWORD_ONESAMPLE = 0, + HDMI_AUDIO_ONEWORD_TWOSAMPLES = 1 +}; + +enum hdmi_audio_sample_size_omap { + HDMI_AUDIO_SAMPLE_16BITS = 0, + HDMI_AUDIO_SAMPLE_24BITS = 1 +}; + +enum hdmi_audio_transf_mode { + HDMI_AUDIO_TRANSF_DMA = 0, + HDMI_AUDIO_TRANSF_IRQ = 1 +}; + +enum hdmi_audio_blk_strt_end_sig { + HDMI_AUDIO_BLOCK_SIG_STARTEND_ON = 0, + HDMI_AUDIO_BLOCK_SIG_STARTEND_OFF = 1 +}; + +enum hdmi_core_audio_layout { + HDMI_AUDIO_LAYOUT_2CH = 0, + HDMI_AUDIO_LAYOUT_8CH = 1, + HDMI_AUDIO_LAYOUT_6CH = 2 +}; + +enum hdmi_core_cts_mode { + HDMI_AUDIO_CTS_MODE_HW = 0, + HDMI_AUDIO_CTS_MODE_SW = 1 +}; + +enum hdmi_audio_mclk_mode { + HDMI_AUDIO_MCLK_128FS = 0, + HDMI_AUDIO_MCLK_256FS = 1, + HDMI_AUDIO_MCLK_384FS = 2, + HDMI_AUDIO_MCLK_512FS = 3, + HDMI_AUDIO_MCLK_768FS = 4, + HDMI_AUDIO_MCLK_1024FS = 5, + HDMI_AUDIO_MCLK_1152FS = 6, + HDMI_AUDIO_MCLK_192FS = 7 +}; + +struct hdmi_video_format { + enum hdmi_packing_mode packing_mode; + u32 y_res; /* Line per panel */ + u32 x_res; /* pixel per line */ +}; + +struct hdmi_config { + struct videomode vm; + struct hdmi_avi_infoframe infoframe; + enum hdmi_core_hdmi_dvi hdmi_dvi_mode; +}; + +struct hdmi_audio_format { + enum hdmi_stereo_channels stereo_channels; + u8 active_chnnls_msk; + enum hdmi_audio_type type; + enum hdmi_audio_justify justification; + enum hdmi_audio_sample_order sample_order; + enum hdmi_audio_samples_perword samples_per_word; + enum hdmi_audio_sample_size_omap sample_size; + enum hdmi_audio_blk_strt_end_sig en_sig_blk_strt_end; +}; + +struct hdmi_audio_dma { + u8 transfer_size; + u8 block_size; + enum hdmi_audio_transf_mode mode; + u16 fifo_threshold; +}; + +struct hdmi_core_audio_i2s_config { + u8 in_length_bits; + u8 justification; + u8 sck_edge_mode; + u8 vbit; + u8 direction; + u8 shift; + u8 active_sds; +}; + +struct hdmi_core_audio_config { + struct hdmi_core_audio_i2s_config i2s_cfg; + struct snd_aes_iec958 *iec60958_cfg; + bool fs_override; + u32 n; + u32 cts; + u32 aud_par_busclk; + enum hdmi_core_audio_layout layout; + enum hdmi_core_cts_mode cts_mode; + bool use_mclk; + enum hdmi_audio_mclk_mode mclk_mode; + bool en_acr_pkt; + bool en_dsd_audio; + bool en_parallel_aud_input; + bool en_spdif; +}; + +struct hdmi_wp_data { + void __iomem *base; + phys_addr_t phys_base; + unsigned int version; +}; + +struct hdmi_pll_data { + struct dss_pll pll; + + void __iomem *base; + + struct platform_device *pdev; + struct hdmi_wp_data *wp; +}; + +struct hdmi_phy_features { + bool bist_ctrl; + bool ldo_voltage; + unsigned long max_phy; +}; + +struct hdmi_phy_data { + void __iomem *base; + + const struct hdmi_phy_features *features; + u8 lane_function[4]; + u8 lane_polarity[4]; +}; + +struct hdmi_core_data { + void __iomem *base; + bool cts_swmode; + bool audio_use_mclk; + + struct hdmi_wp_data *wp; + unsigned int core_pwr_cnt; + struct cec_adapter *adap; +}; + +static inline void hdmi_write_reg(void __iomem *base_addr, const u32 idx, + u32 val) +{ + __raw_writel(val, base_addr + idx); +} + +static inline u32 hdmi_read_reg(void __iomem *base_addr, const u32 idx) +{ + return __raw_readl(base_addr + idx); +} + +#define REG_FLD_MOD(base, idx, val, start, end) \ + hdmi_write_reg(base, idx, FLD_MOD(hdmi_read_reg(base, idx),\ + val, start, end)) +#define REG_GET(base, idx, start, end) \ + FLD_GET(hdmi_read_reg(base, idx), start, end) + +static inline int hdmi_wait_for_bit_change(void __iomem *base_addr, + const u32 idx, int b2, int b1, u32 val) +{ + u32 t = 0, v; + while (val != (v = REG_GET(base_addr, idx, b2, b1))) { + if (t++ > 10000) + return v; + udelay(1); + } + return v; +} + +/* HDMI wrapper funcs */ +int hdmi_wp_video_start(struct hdmi_wp_data *wp); +void hdmi_wp_video_stop(struct hdmi_wp_data *wp); +void hdmi_wp_dump(struct hdmi_wp_data *wp, struct seq_file *s); +u32 hdmi_wp_get_irqstatus(struct hdmi_wp_data *wp); +void hdmi_wp_set_irqstatus(struct hdmi_wp_data *wp, u32 irqstatus); +void hdmi_wp_set_irqenable(struct hdmi_wp_data *wp, u32 mask); +void hdmi_wp_clear_irqenable(struct hdmi_wp_data *wp, u32 mask); +int hdmi_wp_set_phy_pwr(struct hdmi_wp_data *wp, enum hdmi_phy_pwr val); +int hdmi_wp_set_pll_pwr(struct hdmi_wp_data *wp, enum hdmi_pll_pwr val); +void hdmi_wp_video_config_format(struct hdmi_wp_data *wp, + const struct hdmi_video_format *video_fmt); +void hdmi_wp_video_config_interface(struct hdmi_wp_data *wp, + const struct videomode *vm); +void hdmi_wp_video_config_timing(struct hdmi_wp_data *wp, + const struct videomode *vm); +void hdmi_wp_init_vid_fmt_timings(struct hdmi_video_format *video_fmt, + struct videomode *vm, const struct hdmi_config *param); +int hdmi_wp_init(struct platform_device *pdev, struct hdmi_wp_data *wp, + unsigned int version); +phys_addr_t hdmi_wp_get_audio_dma_addr(struct hdmi_wp_data *wp); + +/* HDMI PLL funcs */ +void hdmi_pll_dump(struct hdmi_pll_data *pll, struct seq_file *s); +int hdmi_pll_init(struct dss_device *dss, struct platform_device *pdev, + struct hdmi_pll_data *pll, struct hdmi_wp_data *wp); +void hdmi_pll_uninit(struct hdmi_pll_data *hpll); + +/* HDMI PHY funcs */ +int hdmi_phy_configure(struct hdmi_phy_data *phy, unsigned long hfbitclk, + unsigned long lfbitclk); +void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s); +int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy, + unsigned int version); +int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes); + +/* HDMI common funcs */ +int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep, + struct hdmi_phy_data *phy); + +/* Audio funcs */ +int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts); +int hdmi_wp_audio_enable(struct hdmi_wp_data *wp, bool enable); +int hdmi_wp_audio_core_req_enable(struct hdmi_wp_data *wp, bool enable); +void hdmi_wp_audio_config_format(struct hdmi_wp_data *wp, + struct hdmi_audio_format *aud_fmt); +void hdmi_wp_audio_config_dma(struct hdmi_wp_data *wp, + struct hdmi_audio_dma *aud_dma); +static inline bool hdmi_mode_has_audio(struct hdmi_config *cfg) +{ + return cfg->hdmi_dvi_mode == HDMI_HDMI ? true : false; +} + +/* HDMI DRV data */ +struct omap_hdmi { + struct mutex lock; + struct platform_device *pdev; + struct dss_device *dss; + + struct dss_debugfs_entry *debugfs; + + struct hdmi_wp_data wp; + struct hdmi_pll_data pll; + struct hdmi_phy_data phy; + struct hdmi_core_data core; + + struct hdmi_config cfg; + + struct regulator *vdda_reg; + + bool core_enabled; + + struct omap_dss_device output; + struct drm_bridge bridge; + + struct platform_device *audio_pdev; + void (*audio_abort_cb)(struct device *dev); + int wp_idlemode; + + bool audio_configured; + struct omap_dss_audio audio_config; + + /* This lock should be taken when booleans below are touched. */ + spinlock_t audio_playing_lock; + bool audio_playing; + bool display_enabled; +}; + +#define drm_bridge_to_hdmi(b) container_of(b, struct omap_hdmi, bridge) + +#endif -- cgit v1.2.3