From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 262 +++++++++++++++++++++ 1 file changed, 262 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c (limited to 'drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c') diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c new file mode 100644 index 000000000..df493da50 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +#define FEIYANG_INIT_CMD_LEN 2 + +struct feiyang { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + + struct regulator *dvdd; + struct regulator *avdd; + struct gpio_desc *reset; +}; + +static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel) +{ + return container_of(panel, struct feiyang, panel); +} + +struct feiyang_init_cmd { + u8 data[FEIYANG_INIT_CMD_LEN]; +}; + +static const struct feiyang_init_cmd feiyang_init_cmds[] = { + { .data = { 0x80, 0x58 } }, + { .data = { 0x81, 0x47 } }, + { .data = { 0x82, 0xD4 } }, + { .data = { 0x83, 0x88 } }, + { .data = { 0x84, 0xA9 } }, + { .data = { 0x85, 0xC3 } }, + { .data = { 0x86, 0x82 } }, +}; + +static int feiyang_prepare(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + struct mipi_dsi_device *dsi = ctx->dsi; + unsigned int i; + int ret; + + ret = regulator_enable(ctx->dvdd); + if (ret) + return ret; + + /* T1 (dvdd start + dvdd rise) 0 < T1 <= 10ms */ + msleep(10); + + ret = regulator_enable(ctx->avdd); + if (ret) + return ret; + + /* T3 (dvdd rise + avdd start + avdd rise) T3 >= 20ms */ + msleep(20); + + gpiod_set_value(ctx->reset, 0); + + /* + * T5 + T6 (avdd rise + video & logic signal rise) + * T5 >= 10ms, 0 < T6 <= 10ms + */ + msleep(20); + + gpiod_set_value(ctx->reset, 1); + + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ + msleep(200); + + for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) { + const struct feiyang_init_cmd *cmd = + &feiyang_init_cmds[i]; + + ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, + FEIYANG_INIT_CMD_LEN); + if (ret < 0) + return ret; + } + + return 0; +} + +static int feiyang_enable(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ + msleep(200); + + mipi_dsi_dcs_set_display_on(ctx->dsi); + + return 0; +} + +static int feiyang_disable(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + + return mipi_dsi_dcs_set_display_off(ctx->dsi); +} + +static int feiyang_unprepare(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + int ret; + + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); + if (ret < 0) + dev_err(panel->dev, "failed to set display off: %d\n", ret); + + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); + if (ret < 0) + dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret); + + /* T13 (backlight fall + video & logic signal fall) T13 >= 200ms */ + msleep(200); + + gpiod_set_value(ctx->reset, 0); + + regulator_disable(ctx->avdd); + + /* T11 (dvdd rise to fall) 0 < T11 <= 10ms */ + msleep(10); + + regulator_disable(ctx->dvdd); + + return 0; +} + +static const struct drm_display_mode feiyang_default_mode = { + .clock = 55000, + + .hdisplay = 1024, + .hsync_start = 1024 + 310, + .hsync_end = 1024 + 310 + 20, + .htotal = 1024 + 310 + 20 + 90, + + .vdisplay = 600, + .vsync_start = 600 + 12, + .vsync_end = 600 + 12 + 2, + .vtotal = 600 + 12 + 2 + 21, + + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static int feiyang_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &feiyang_default_mode); + if (!mode) { + dev_err(&ctx->dsi->dev, "failed to add mode %ux%u@%u\n", + feiyang_default_mode.hdisplay, + feiyang_default_mode.vdisplay, + drm_mode_vrefresh(&feiyang_default_mode)); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs feiyang_funcs = { + .disable = feiyang_disable, + .unprepare = feiyang_unprepare, + .prepare = feiyang_prepare, + .enable = feiyang_enable, + .get_modes = feiyang_get_modes, +}; + +static int feiyang_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct feiyang *ctx; + int ret; + + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dsi = dsi; + + drm_panel_init(&ctx->panel, &dsi->dev, &feiyang_funcs, + DRM_MODE_CONNECTOR_DSI); + + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); + if (IS_ERR(ctx->dvdd)) + return dev_err_probe(&dsi->dev, PTR_ERR(ctx->dvdd), + "Couldn't get dvdd regulator\n"); + + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); + if (IS_ERR(ctx->avdd)) + return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd), + "Couldn't get avdd regulator\n"); + + ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset)) + return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset), + "Couldn't get our reset GPIO\n"); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->lanes = 4; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void feiyang_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct feiyang *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id feiyang_of_match[] = { + { .compatible = "feiyang,fy07024di26a30d", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, feiyang_of_match); + +static struct mipi_dsi_driver feiyang_driver = { + .probe = feiyang_dsi_probe, + .remove = feiyang_dsi_remove, + .driver = { + .name = "feiyang-fy07024di26a30d", + .of_match_table = feiyang_of_match, + }, +}; +module_mipi_dsi_driver(feiyang_driver); + +MODULE_AUTHOR("Jagan Teki "); +MODULE_DESCRIPTION("Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3