From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/panel/panel-novatek-nt39016.c | 360 ++++++++++++++++++++++++++ 1 file changed, 360 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt39016.c (limited to 'drivers/gpu/drm/panel/panel-novatek-nt39016.c') diff --git a/drivers/gpu/drm/panel/panel-novatek-nt39016.c b/drivers/gpu/drm/panel/panel-novatek-nt39016.c new file mode 100644 index 000000000..f58cfb10b --- /dev/null +++ b/drivers/gpu/drm/panel/panel-novatek-nt39016.c @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Novatek NT39016 TFT LCD panel driver + * + * Copyright (C) 2017, Maarten ter Huurne + * Copyright (C) 2019, Paul Cercueil + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +enum nt39016_regs { + NT39016_REG_SYSTEM, + NT39016_REG_TIMING, + NT39016_REG_OP, + NT39016_REG_DATA_IN, + NT39016_REG_SRC_TIMING_DELAY, + NT39016_REG_GATE_TIMING_DELAY, + NT39016_REG_RESERVED, + NT39016_REG_INITIAL_FUNC, + NT39016_REG_CONTRAST, + NT39016_REG_BRIGHTNESS, + NT39016_REG_HUE_SATURATION, + NT39016_REG_RB_SUBCONTRAST, + NT39016_REG_R_SUBBRIGHTNESS, + NT39016_REG_B_SUBBRIGHTNESS, + NT39016_REG_VCOMDC, + NT39016_REG_VCOMAC, + NT39016_REG_VGAM2, + NT39016_REG_VGAM34, + NT39016_REG_VGAM56, + NT39016_REG_VCOMDC_TRIM = 0x1e, + NT39016_REG_DISPLAY_MODE = 0x20, +}; + +#define NT39016_SYSTEM_RESET_N BIT(0) +#define NT39016_SYSTEM_STANDBY BIT(1) + +struct nt39016_panel_info { + const struct drm_display_mode *display_modes; + unsigned int num_modes; + u16 width_mm, height_mm; + u32 bus_format, bus_flags; +}; + +struct nt39016 { + struct drm_panel drm_panel; + struct regmap *map; + struct regulator *supply; + const struct nt39016_panel_info *panel_info; + + struct gpio_desc *reset_gpio; +}; + +static inline struct nt39016 *to_nt39016(struct drm_panel *panel) +{ + return container_of(panel, struct nt39016, drm_panel); +} + +#define RV(REG, VAL) { .reg = (REG), .def = (VAL), .delay_us = 2 } +static const struct reg_sequence nt39016_panel_regs[] = { + RV(NT39016_REG_SYSTEM, 0x00), + RV(NT39016_REG_TIMING, 0x00), + RV(NT39016_REG_OP, 0x03), + RV(NT39016_REG_DATA_IN, 0xCC), + RV(NT39016_REG_SRC_TIMING_DELAY, 0x46), + RV(NT39016_REG_GATE_TIMING_DELAY, 0x05), + RV(NT39016_REG_RESERVED, 0x00), + RV(NT39016_REG_INITIAL_FUNC, 0x00), + RV(NT39016_REG_CONTRAST, 0x08), + RV(NT39016_REG_BRIGHTNESS, 0x40), + RV(NT39016_REG_HUE_SATURATION, 0x88), + RV(NT39016_REG_RB_SUBCONTRAST, 0x88), + RV(NT39016_REG_R_SUBBRIGHTNESS, 0x20), + RV(NT39016_REG_B_SUBBRIGHTNESS, 0x20), + RV(NT39016_REG_VCOMDC, 0x67), + RV(NT39016_REG_VCOMAC, 0xA4), + RV(NT39016_REG_VGAM2, 0x04), + RV(NT39016_REG_VGAM34, 0x24), + RV(NT39016_REG_VGAM56, 0x24), + RV(NT39016_REG_DISPLAY_MODE, 0x00), +}; + +#undef RV + +static const struct regmap_range nt39016_regmap_no_ranges[] = { + regmap_reg_range(0x13, 0x1D), + regmap_reg_range(0x1F, 0x1F), +}; + +static const struct regmap_access_table nt39016_regmap_access_table = { + .no_ranges = nt39016_regmap_no_ranges, + .n_no_ranges = ARRAY_SIZE(nt39016_regmap_no_ranges), +}; + +static const struct regmap_config nt39016_regmap_config = { + .reg_bits = 6, + .pad_bits = 2, + .val_bits = 8, + + .max_register = NT39016_REG_DISPLAY_MODE, + .wr_table = &nt39016_regmap_access_table, + .write_flag_mask = 0x02, + + .cache_type = REGCACHE_FLAT, +}; + +static int nt39016_prepare(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + int err; + + err = regulator_enable(panel->supply); + if (err) { + dev_err(drm_panel->dev, "Failed to enable power supply: %d\n", err); + return err; + } + + /* + * Reset the NT39016. + * The documentation says the reset pulse should be at least 40 us to + * pass the glitch filter, but when testing I see some resets fail and + * some succeed when using a 70 us delay, so we use 100 us instead. + */ + gpiod_set_value_cansleep(panel->reset_gpio, 1); + usleep_range(100, 1000); + gpiod_set_value_cansleep(panel->reset_gpio, 0); + udelay(2); + + /* Init all registers. */ + err = regmap_multi_reg_write(panel->map, nt39016_panel_regs, + ARRAY_SIZE(nt39016_panel_regs)); + if (err) { + dev_err(drm_panel->dev, "Failed to init registers: %d\n", err); + goto err_disable_regulator; + } + + return 0; + +err_disable_regulator: + regulator_disable(panel->supply); + return err; +} + +static int nt39016_unprepare(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + + gpiod_set_value_cansleep(panel->reset_gpio, 1); + + regulator_disable(panel->supply); + + return 0; +} + +static int nt39016_enable(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + int ret; + + ret = regmap_write(panel->map, NT39016_REG_SYSTEM, + NT39016_SYSTEM_RESET_N | NT39016_SYSTEM_STANDBY); + if (ret) { + dev_err(drm_panel->dev, "Unable to enable panel: %d\n", ret); + return ret; + } + + if (drm_panel->backlight) { + /* Wait for the picture to be ready before enabling backlight */ + msleep(150); + } + + return 0; +} + +static int nt39016_disable(struct drm_panel *drm_panel) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + int err; + + err = regmap_write(panel->map, NT39016_REG_SYSTEM, + NT39016_SYSTEM_RESET_N); + if (err) { + dev_err(drm_panel->dev, "Unable to disable panel: %d\n", err); + return err; + } + + return 0; +} + +static int nt39016_get_modes(struct drm_panel *drm_panel, + struct drm_connector *connector) +{ + struct nt39016 *panel = to_nt39016(drm_panel); + const struct nt39016_panel_info *panel_info = panel->panel_info; + struct drm_display_mode *mode; + unsigned int i; + + for (i = 0; i < panel_info->num_modes; i++) { + mode = drm_mode_duplicate(connector->dev, + &panel_info->display_modes[i]); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER; + if (panel_info->num_modes == 1) + mode->type |= DRM_MODE_TYPE_PREFERRED; + + drm_mode_probed_add(connector, mode); + } + + connector->display_info.bpc = 8; + connector->display_info.width_mm = panel_info->width_mm; + connector->display_info.height_mm = panel_info->height_mm; + + drm_display_info_set_bus_formats(&connector->display_info, + &panel_info->bus_format, 1); + connector->display_info.bus_flags = panel_info->bus_flags; + + return panel_info->num_modes; +} + +static const struct drm_panel_funcs nt39016_funcs = { + .prepare = nt39016_prepare, + .unprepare = nt39016_unprepare, + .enable = nt39016_enable, + .disable = nt39016_disable, + .get_modes = nt39016_get_modes, +}; + +static int nt39016_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct nt39016 *panel; + int err; + + panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL); + if (!panel) + return -ENOMEM; + + spi_set_drvdata(spi, panel); + + panel->panel_info = of_device_get_match_data(dev); + if (!panel->panel_info) + return -EINVAL; + + panel->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(panel->supply)) + return dev_err_probe(dev, PTR_ERR(panel->supply), + "Failed to get power supply\n"); + + panel->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(panel->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(panel->reset_gpio), "Failed to get reset GPIO\n"); + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_3 | SPI_3WIRE; + err = spi_setup(spi); + if (err) { + dev_err(dev, "Failed to setup SPI\n"); + return err; + } + + panel->map = devm_regmap_init_spi(spi, &nt39016_regmap_config); + if (IS_ERR(panel->map)) { + dev_err(dev, "Failed to init regmap\n"); + return PTR_ERR(panel->map); + } + + drm_panel_init(&panel->drm_panel, dev, &nt39016_funcs, + DRM_MODE_CONNECTOR_DPI); + + err = drm_panel_of_backlight(&panel->drm_panel); + if (err) + return dev_err_probe(dev, err, "Failed to get backlight handle\n"); + + drm_panel_add(&panel->drm_panel); + + return 0; +} + +static void nt39016_remove(struct spi_device *spi) +{ + struct nt39016 *panel = spi_get_drvdata(spi); + + drm_panel_remove(&panel->drm_panel); + + nt39016_disable(&panel->drm_panel); + nt39016_unprepare(&panel->drm_panel); +} + +static const struct drm_display_mode kd035g6_display_modes[] = { + { /* 60 Hz */ + .clock = 6000, + .hdisplay = 320, + .hsync_start = 320 + 10, + .hsync_end = 320 + 10 + 50, + .htotal = 320 + 10 + 50 + 20, + .vdisplay = 240, + .vsync_start = 240 + 5, + .vsync_end = 240 + 5 + 1, + .vtotal = 240 + 5 + 1 + 4, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + }, + { /* 50 Hz */ + .clock = 5400, + .hdisplay = 320, + .hsync_start = 320 + 42, + .hsync_end = 320 + 42 + 50, + .htotal = 320 + 42 + 50 + 20, + .vdisplay = 240, + .vsync_start = 240 + 5, + .vsync_end = 240 + 5 + 1, + .vtotal = 240 + 5 + 1 + 4, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + }, +}; + +static const struct nt39016_panel_info kd035g6_info = { + .display_modes = kd035g6_display_modes, + .num_modes = ARRAY_SIZE(kd035g6_display_modes), + .width_mm = 71, + .height_mm = 53, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, +}; + +static const struct of_device_id nt39016_of_match[] = { + { .compatible = "kingdisplay,kd035g6-54nt", .data = &kd035g6_info }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, nt39016_of_match); + +static struct spi_driver nt39016_driver = { + .driver = { + .name = "nt39016", + .of_match_table = nt39016_of_match, + }, + .probe = nt39016_probe, + .remove = nt39016_remove, +}; + +module_spi_driver(nt39016_driver); + +MODULE_AUTHOR("Maarten ter Huurne "); +MODULE_AUTHOR("Paul Cercueil "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3