From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 238 +++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c (limited to 'drivers/gpu/drm/panel/panel-ronbo-rb070d30.c') diff --git a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c new file mode 100644 index 000000000..a8a98c91b --- /dev/null +++ b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018-2019, Bridge Systems BV + * Copyright (C) 2018-2019, Bootlin + * Copyright (C) 2017, Free Electrons + * + * This file based on panel-ilitek-ili9881c.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +struct rb070d30_panel { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + struct regulator *supply; + + struct { + struct gpio_desc *power; + struct gpio_desc *reset; + struct gpio_desc *updn; + struct gpio_desc *shlr; + } gpios; +}; + +static inline struct rb070d30_panel *panel_to_rb070d30_panel(struct drm_panel *panel) +{ + return container_of(panel, struct rb070d30_panel, panel); +} + +static int rb070d30_panel_prepare(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + int ret; + + ret = regulator_enable(ctx->supply); + if (ret < 0) { + dev_err(&ctx->dsi->dev, "Failed to enable supply: %d\n", ret); + return ret; + } + + msleep(20); + gpiod_set_value(ctx->gpios.power, 1); + msleep(20); + gpiod_set_value(ctx->gpios.reset, 1); + msleep(20); + return 0; +} + +static int rb070d30_panel_unprepare(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + gpiod_set_value(ctx->gpios.reset, 0); + gpiod_set_value(ctx->gpios.power, 0); + regulator_disable(ctx->supply); + + return 0; +} + +static int rb070d30_panel_enable(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + return mipi_dsi_dcs_exit_sleep_mode(ctx->dsi); +} + +static int rb070d30_panel_disable(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + return mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); +} + +/* Default timings */ +static const struct drm_display_mode default_mode = { + .clock = 51206, + .hdisplay = 1024, + .hsync_start = 1024 + 160, + .hsync_end = 1024 + 160 + 80, + .htotal = 1024 + 160 + 80 + 80, + .vdisplay = 600, + .vsync_start = 600 + 12, + .vsync_end = 600 + 12 + 10, + .vtotal = 600 + 12 + 10 + 13, + + .width_mm = 154, + .height_mm = 85, +}; + +static int rb070d30_panel_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + struct drm_display_mode *mode; + static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + mode = drm_mode_duplicate(connector->dev, &default_mode); + if (!mode) { + dev_err(&ctx->dsi->dev, "Failed to add mode " DRM_MODE_FMT "\n", + DRM_MODE_ARG(&default_mode)); + return -EINVAL; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + connector->display_info.bpc = 8; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + + return 1; +} + +static const struct drm_panel_funcs rb070d30_panel_funcs = { + .get_modes = rb070d30_panel_get_modes, + .prepare = rb070d30_panel_prepare, + .enable = rb070d30_panel_enable, + .disable = rb070d30_panel_disable, + .unprepare = rb070d30_panel_unprepare, +}; + +static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct rb070d30_panel *ctx; + int ret; + + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->supply = devm_regulator_get(&dsi->dev, "vcc-lcd"); + if (IS_ERR(ctx->supply)) + return PTR_ERR(ctx->supply); + + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dsi = dsi; + + drm_panel_init(&ctx->panel, &dsi->dev, &rb070d30_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + ctx->gpios.reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.reset)) { + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n"); + return PTR_ERR(ctx->gpios.reset); + } + + ctx->gpios.power = devm_gpiod_get(&dsi->dev, "power", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.power)) { + dev_err(&dsi->dev, "Couldn't get our power GPIO\n"); + return PTR_ERR(ctx->gpios.power); + } + + /* + * We don't change the state of that GPIO later on but we need + * to force it into a low state. + */ + ctx->gpios.updn = devm_gpiod_get(&dsi->dev, "updn", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.updn)) { + dev_err(&dsi->dev, "Couldn't get our updn GPIO\n"); + return PTR_ERR(ctx->gpios.updn); + } + + /* + * We don't change the state of that GPIO later on but we need + * to force it into a low state. + */ + ctx->gpios.shlr = devm_gpiod_get(&dsi->dev, "shlr", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.shlr)) { + dev_err(&dsi->dev, "Couldn't get our shlr GPIO\n"); + return PTR_ERR(ctx->gpios.shlr); + } + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->lanes = 4; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void rb070d30_panel_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct rb070d30_panel *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id rb070d30_panel_of_match[] = { + { .compatible = "ronbo,rb070d30" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rb070d30_panel_of_match); + +static struct mipi_dsi_driver rb070d30_panel_driver = { + .probe = rb070d30_panel_dsi_probe, + .remove = rb070d30_panel_dsi_remove, + .driver = { + .name = "panel-ronbo-rb070d30", + .of_match_table = rb070d30_panel_of_match, + }, +}; +module_mipi_dsi_driver(rb070d30_panel_driver); + +MODULE_AUTHOR("Boris Brezillon "); +MODULE_AUTHOR("Konstantin Sudakov "); +MODULE_DESCRIPTION("Ronbo RB070D30 Panel Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3