From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/radeon/rv250d.h | 123 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 drivers/gpu/drm/radeon/rv250d.h (limited to 'drivers/gpu/drm/radeon/rv250d.h') diff --git a/drivers/gpu/drm/radeon/rv250d.h b/drivers/gpu/drm/radeon/rv250d.h new file mode 100644 index 000000000..e5a70b06f --- /dev/null +++ b/drivers/gpu/drm/radeon/rv250d.h @@ -0,0 +1,123 @@ +/* + * Copyright 2008 Advanced Micro Devices, Inc. + * Copyright 2008 Red Hat Inc. + * Copyright 2009 Jerome Glisse. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Dave Airlie + * Alex Deucher + * Jerome Glisse + */ +#ifndef __RV250D_H__ +#define __RV250D_H__ + +#define R_00000D_SCLK_CNTL_M6 0x00000D +#define S_00000D_SCLK_SRC_SEL(x) (((x) & 0x7) << 0) +#define G_00000D_SCLK_SRC_SEL(x) (((x) >> 0) & 0x7) +#define C_00000D_SCLK_SRC_SEL 0xFFFFFFF8 +#define S_00000D_CP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 3) +#define G_00000D_CP_MAX_DYN_STOP_LAT(x) (((x) >> 3) & 0x1) +#define C_00000D_CP_MAX_DYN_STOP_LAT 0xFFFFFFF7 +#define S_00000D_HDP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 4) +#define G_00000D_HDP_MAX_DYN_STOP_LAT(x) (((x) >> 4) & 0x1) +#define C_00000D_HDP_MAX_DYN_STOP_LAT 0xFFFFFFEF +#define S_00000D_TV_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 5) +#define G_00000D_TV_MAX_DYN_STOP_LAT(x) (((x) >> 5) & 0x1) +#define C_00000D_TV_MAX_DYN_STOP_LAT 0xFFFFFFDF +#define S_00000D_E2_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 6) +#define G_00000D_E2_MAX_DYN_STOP_LAT(x) (((x) >> 6) & 0x1) +#define C_00000D_E2_MAX_DYN_STOP_LAT 0xFFFFFFBF +#define S_00000D_SE_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 7) +#define G_00000D_SE_MAX_DYN_STOP_LAT(x) (((x) >> 7) & 0x1) +#define C_00000D_SE_MAX_DYN_STOP_LAT 0xFFFFFF7F +#define S_00000D_IDCT_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 8) +#define G_00000D_IDCT_MAX_DYN_STOP_LAT(x) (((x) >> 8) & 0x1) +#define C_00000D_IDCT_MAX_DYN_STOP_LAT 0xFFFFFEFF +#define S_00000D_VIP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 9) +#define G_00000D_VIP_MAX_DYN_STOP_LAT(x) (((x) >> 9) & 0x1) +#define C_00000D_VIP_MAX_DYN_STOP_LAT 0xFFFFFDFF +#define S_00000D_RE_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 10) +#define G_00000D_RE_MAX_DYN_STOP_LAT(x) (((x) >> 10) & 0x1) +#define C_00000D_RE_MAX_DYN_STOP_LAT 0xFFFFFBFF +#define S_00000D_PB_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 11) +#define G_00000D_PB_MAX_DYN_STOP_LAT(x) (((x) >> 11) & 0x1) +#define C_00000D_PB_MAX_DYN_STOP_LAT 0xFFFFF7FF +#define S_00000D_TAM_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 12) +#define G_00000D_TAM_MAX_DYN_STOP_LAT(x) (((x) >> 12) & 0x1) +#define C_00000D_TAM_MAX_DYN_STOP_LAT 0xFFFFEFFF +#define S_00000D_TDM_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 13) +#define G_00000D_TDM_MAX_DYN_STOP_LAT(x) (((x) >> 13) & 0x1) +#define C_00000D_TDM_MAX_DYN_STOP_LAT 0xFFFFDFFF +#define S_00000D_RB_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 14) +#define G_00000D_RB_MAX_DYN_STOP_LAT(x) (((x) >> 14) & 0x1) +#define C_00000D_RB_MAX_DYN_STOP_LAT 0xFFFFBFFF +#define S_00000D_FORCE_DISP2(x) (((x) & 0x1) << 15) +#define G_00000D_FORCE_DISP2(x) (((x) >> 15) & 0x1) +#define C_00000D_FORCE_DISP2 0xFFFF7FFF +#define S_00000D_FORCE_CP(x) (((x) & 0x1) << 16) +#define G_00000D_FORCE_CP(x) (((x) >> 16) & 0x1) +#define C_00000D_FORCE_CP 0xFFFEFFFF +#define S_00000D_FORCE_HDP(x) (((x) & 0x1) << 17) +#define G_00000D_FORCE_HDP(x) (((x) >> 17) & 0x1) +#define C_00000D_FORCE_HDP 0xFFFDFFFF +#define S_00000D_FORCE_DISP1(x) (((x) & 0x1) << 18) +#define G_00000D_FORCE_DISP1(x) (((x) >> 18) & 0x1) +#define C_00000D_FORCE_DISP1 0xFFFBFFFF +#define S_00000D_FORCE_TOP(x) (((x) & 0x1) << 19) +#define G_00000D_FORCE_TOP(x) (((x) >> 19) & 0x1) +#define C_00000D_FORCE_TOP 0xFFF7FFFF +#define S_00000D_FORCE_E2(x) (((x) & 0x1) << 20) +#define G_00000D_FORCE_E2(x) (((x) >> 20) & 0x1) +#define C_00000D_FORCE_E2 0xFFEFFFFF +#define S_00000D_FORCE_SE(x) (((x) & 0x1) << 21) +#define G_00000D_FORCE_SE(x) (((x) >> 21) & 0x1) +#define C_00000D_FORCE_SE 0xFFDFFFFF +#define S_00000D_FORCE_IDCT(x) (((x) & 0x1) << 22) +#define G_00000D_FORCE_IDCT(x) (((x) >> 22) & 0x1) +#define C_00000D_FORCE_IDCT 0xFFBFFFFF +#define S_00000D_FORCE_VIP(x) (((x) & 0x1) << 23) +#define G_00000D_FORCE_VIP(x) (((x) >> 23) & 0x1) +#define C_00000D_FORCE_VIP 0xFF7FFFFF +#define S_00000D_FORCE_RE(x) (((x) & 0x1) << 24) +#define G_00000D_FORCE_RE(x) (((x) >> 24) & 0x1) +#define C_00000D_FORCE_RE 0xFEFFFFFF +#define S_00000D_FORCE_PB(x) (((x) & 0x1) << 25) +#define G_00000D_FORCE_PB(x) (((x) >> 25) & 0x1) +#define C_00000D_FORCE_PB 0xFDFFFFFF +#define S_00000D_FORCE_TAM(x) (((x) & 0x1) << 26) +#define G_00000D_FORCE_TAM(x) (((x) >> 26) & 0x1) +#define C_00000D_FORCE_TAM 0xFBFFFFFF +#define S_00000D_FORCE_TDM(x) (((x) & 0x1) << 27) +#define G_00000D_FORCE_TDM(x) (((x) >> 27) & 0x1) +#define C_00000D_FORCE_TDM 0xF7FFFFFF +#define S_00000D_FORCE_RB(x) (((x) & 0x1) << 28) +#define G_00000D_FORCE_RB(x) (((x) >> 28) & 0x1) +#define C_00000D_FORCE_RB 0xEFFFFFFF +#define S_00000D_FORCE_TV_SCLK(x) (((x) & 0x1) << 29) +#define G_00000D_FORCE_TV_SCLK(x) (((x) >> 29) & 0x1) +#define C_00000D_FORCE_TV_SCLK 0xDFFFFFFF +#define S_00000D_FORCE_SUBPIC(x) (((x) & 0x1) << 30) +#define G_00000D_FORCE_SUBPIC(x) (((x) >> 30) & 0x1) +#define C_00000D_FORCE_SUBPIC 0xBFFFFFFF +#define S_00000D_FORCE_OV0(x) (((x) & 0x1) << 31) +#define G_00000D_FORCE_OV0(x) (((x) >> 31) & 0x1) +#define C_00000D_FORCE_OV0 0x7FFFFFFF + +#endif -- cgit v1.2.3