From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/radeon/rv730d.h | 165 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 drivers/gpu/drm/radeon/rv730d.h (limited to 'drivers/gpu/drm/radeon/rv730d.h') diff --git a/drivers/gpu/drm/radeon/rv730d.h b/drivers/gpu/drm/radeon/rv730d.h new file mode 100644 index 000000000..f0a7954fb --- /dev/null +++ b/drivers/gpu/drm/radeon/rv730d.h @@ -0,0 +1,165 @@ +/* + * Copyright 2011 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ +#ifndef RV730_H +#define RV730_H + +#define CG_SPLL_FUNC_CNTL 0x600 +#define SPLL_RESET (1 << 0) +#define SPLL_SLEEP (1 << 1) +#define SPLL_DIVEN (1 << 2) +#define SPLL_BYPASS_EN (1 << 3) +#define SPLL_REF_DIV(x) ((x) << 4) +#define SPLL_REF_DIV_MASK (0x3f << 4) +#define SPLL_HILEN(x) ((x) << 12) +#define SPLL_HILEN_MASK (0xf << 12) +#define SPLL_LOLEN(x) ((x) << 16) +#define SPLL_LOLEN_MASK (0xf << 16) +#define CG_SPLL_FUNC_CNTL_2 0x604 +#define SCLK_MUX_SEL(x) ((x) << 0) +#define SCLK_MUX_SEL_MASK (0x1ff << 0) +#define CG_SPLL_FUNC_CNTL_3 0x608 +#define SPLL_FB_DIV(x) ((x) << 0) +#define SPLL_FB_DIV_MASK (0x3ffffff << 0) +#define SPLL_DITHEN (1 << 28) + +#define CG_MPLL_FUNC_CNTL 0x624 +#define MPLL_RESET (1 << 0) +#define MPLL_SLEEP (1 << 1) +#define MPLL_DIVEN (1 << 2) +#define MPLL_BYPASS_EN (1 << 3) +#define MPLL_REF_DIV(x) ((x) << 4) +#define MPLL_REF_DIV_MASK (0x3f << 4) +#define MPLL_HILEN(x) ((x) << 12) +#define MPLL_HILEN_MASK (0xf << 12) +#define MPLL_LOLEN(x) ((x) << 16) +#define MPLL_LOLEN_MASK (0xf << 16) +#define CG_MPLL_FUNC_CNTL_2 0x628 +#define MCLK_MUX_SEL(x) ((x) << 0) +#define MCLK_MUX_SEL_MASK (0x1ff << 0) +#define CG_MPLL_FUNC_CNTL_3 0x62c +#define MPLL_FB_DIV(x) ((x) << 0) +#define MPLL_FB_DIV_MASK (0x3ffffff << 0) +#define MPLL_DITHEN (1 << 28) + +#define CG_TCI_MPLL_SPREAD_SPECTRUM 0x634 +#define CG_TCI_MPLL_SPREAD_SPECTRUM_2 0x638 +#define GENERAL_PWRMGT 0x63c +# define GLOBAL_PWRMGT_EN (1 << 0) +# define STATIC_PM_EN (1 << 1) +# define THERMAL_PROTECTION_DIS (1 << 2) +# define THERMAL_PROTECTION_TYPE (1 << 3) +# define ENABLE_GEN2PCIE (1 << 4) +# define ENABLE_GEN2XSP (1 << 5) +# define SW_SMIO_INDEX(x) ((x) << 6) +# define SW_SMIO_INDEX_MASK (3 << 6) +# define LOW_VOLT_D2_ACPI (1 << 8) +# define LOW_VOLT_D3_ACPI (1 << 9) +# define VOLT_PWRMGT_EN (1 << 10) +# define BACKBIAS_PAD_EN (1 << 18) +# define BACKBIAS_VALUE (1 << 19) +# define DYN_SPREAD_SPECTRUM_EN (1 << 23) +# define AC_DC_SW (1 << 24) + +#define SCLK_PWRMGT_CNTL 0x644 +# define SCLK_PWRMGT_OFF (1 << 0) +# define SCLK_LOW_D1 (1 << 1) +# define FIR_RESET (1 << 4) +# define FIR_FORCE_TREND_SEL (1 << 5) +# define FIR_TREND_MODE (1 << 6) +# define DYN_GFX_CLK_OFF_EN (1 << 7) +# define GFX_CLK_FORCE_ON (1 << 8) +# define GFX_CLK_REQUEST_OFF (1 << 9) +# define GFX_CLK_FORCE_OFF (1 << 10) +# define GFX_CLK_OFF_ACPI_D1 (1 << 11) +# define GFX_CLK_OFF_ACPI_D2 (1 << 12) +# define GFX_CLK_OFF_ACPI_D3 (1 << 13) + +#define TCI_MCLK_PWRMGT_CNTL 0x648 +# define MPLL_PWRMGT_OFF (1 << 5) +# define DLL_READY (1 << 6) +# define MC_INT_CNTL (1 << 7) +# define MRDCKA_SLEEP (1 << 8) +# define MRDCKB_SLEEP (1 << 9) +# define MRDCKC_SLEEP (1 << 10) +# define MRDCKD_SLEEP (1 << 11) +# define MRDCKE_SLEEP (1 << 12) +# define MRDCKF_SLEEP (1 << 13) +# define MRDCKG_SLEEP (1 << 14) +# define MRDCKH_SLEEP (1 << 15) +# define MRDCKA_RESET (1 << 16) +# define MRDCKB_RESET (1 << 17) +# define MRDCKC_RESET (1 << 18) +# define MRDCKD_RESET (1 << 19) +# define MRDCKE_RESET (1 << 20) +# define MRDCKF_RESET (1 << 21) +# define MRDCKG_RESET (1 << 22) +# define MRDCKH_RESET (1 << 23) +# define DLL_READY_READ (1 << 24) +# define USE_DISPLAY_GAP (1 << 25) +# define USE_DISPLAY_URGENT_NORMAL (1 << 26) +# define MPLL_TURNOFF_D2 (1 << 28) +#define TCI_DLL_CNTL 0x64c + +#define CG_PG_CNTL 0x858 +# define PWRGATE_ENABLE (1 << 0) + +#define CG_AT 0x6d4 +#define CG_R(x) ((x) << 0) +#define CG_R_MASK (0xffff << 0) +#define CG_L(x) ((x) << 16) +#define CG_L_MASK (0xffff << 16) + +#define CG_SPLL_SPREAD_SPECTRUM 0x790 +#define SSEN (1 << 0) +#define CLK_S(x) ((x) << 4) +#define CLK_S_MASK (0xfff << 4) +#define CG_SPLL_SPREAD_SPECTRUM_2 0x794 +#define CLK_V(x) ((x) << 0) +#define CLK_V_MASK (0x3ffffff << 0) + +#define MC_ARB_DRAM_TIMING 0x2774 +#define MC_ARB_DRAM_TIMING2 0x2778 + +#define MC_ARB_RFSH_RATE 0x27b0 +#define POWERMODE0(x) ((x) << 0) +#define POWERMODE0_MASK (0xff << 0) +#define POWERMODE1(x) ((x) << 8) +#define POWERMODE1_MASK (0xff << 8) +#define POWERMODE2(x) ((x) << 16) +#define POWERMODE2_MASK (0xff << 16) +#define POWERMODE3(x) ((x) << 24) +#define POWERMODE3_MASK (0xff << 24) + +#define MC_ARB_DRAM_TIMING_1 0x27f0 +#define MC_ARB_DRAM_TIMING_2 0x27f4 +#define MC_ARB_DRAM_TIMING_3 0x27f8 +#define MC_ARB_DRAM_TIMING2_1 0x27fc +#define MC_ARB_DRAM_TIMING2_2 0x2800 +#define MC_ARB_DRAM_TIMING2_3 0x2804 + +#define MC4_IO_DQ_PAD_CNTL_D0_I0 0x2978 +#define MC4_IO_DQ_PAD_CNTL_D0_I1 0x297c +#define MC4_IO_QS_PAD_CNTL_D0_I0 0x2980 +#define MC4_IO_QS_PAD_CNTL_D0_I1 0x2984 + +#endif -- cgit v1.2.3