From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 724 ++++++++++++++++++++++++++++++++++ 1 file changed, 724 insertions(+) create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_drv.c (limited to 'drivers/gpu/drm/rcar-du/rcar_du_drv.c') diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c new file mode 100644 index 000000000..d003e8d9e --- /dev/null +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c @@ -0,0 +1,724 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * R-Car Display Unit DRM driver + * + * Copyright (C) 2013-2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "rcar_du_drv.h" +#include "rcar_du_kms.h" + +/* ----------------------------------------------------------------------------- + * Device Information + */ + +static const struct rcar_du_device_info rzg1_du_r8a7743_info = { + .gen = 2, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A774[34] has one RGB output and one LVDS output + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(1) | BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 1, + }, + }, + .num_lvds = 1, + .num_rpf = 4, +}; + +static const struct rcar_du_device_info rzg1_du_r8a7745_info = { + .gen = 2, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A7745 has two RGB outputs + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_DPAD1] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + }, + .num_rpf = 4, +}; + +static const struct rcar_du_device_info rzg1_du_r8a77470_info = { + .gen = 2, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A77470 has two RGB outputs, one LVDS output, and + * one (currently unsupported) analog video output + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_DPAD1] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0) | BIT(1), + .port = 2, + }, + }, + .num_rpf = 4, +}; + +static const struct rcar_du_device_info rcar_du_r8a774a1_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(2) | BIT(1) | BIT(0), + .routes = { + /* + * R8A774A1 has one RGB output, one LVDS output and one HDMI + * output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(2), + .port = 0, + }, + [RCAR_DU_OUTPUT_HDMI0] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 2, + }, + }, + .num_lvds = 1, + .num_rpf = 5, + .dpll_mask = BIT(1), +}; + +static const struct rcar_du_device_info rcar_du_r8a774b1_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(3) | BIT(1) | BIT(0), + .routes = { + /* + * R8A774B1 has one RGB output, one LVDS output and one HDMI + * output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(2), + .port = 0, + }, + [RCAR_DU_OUTPUT_HDMI0] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 2, + }, + }, + .num_lvds = 1, + .num_rpf = 5, + .dpll_mask = BIT(1), +}; + +static const struct rcar_du_device_info rcar_du_r8a774c0_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A774C0 has one RGB output and two LVDS outputs + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0) | BIT(1), + .port = 0, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS1] = { + .possible_crtcs = BIT(1), + .port = 2, + }, + }, + .num_lvds = 2, + .num_rpf = 4, + .lvds_clk_mask = BIT(1) | BIT(0), +}; + +static const struct rcar_du_device_info rcar_du_r8a774e1_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(3) | BIT(1) | BIT(0), + .routes = { + /* + * R8A774E1 has one RGB output, one LVDS output and one HDMI + * output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(2), + .port = 0, + }, + [RCAR_DU_OUTPUT_HDMI0] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 2, + }, + }, + .num_lvds = 1, + .num_rpf = 5, + .dpll_mask = BIT(1), +}; + +static const struct rcar_du_device_info rcar_du_r8a7779_info = { + .gen = 1, + .features = RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A7779 has two RGB outputs and one (currently unsupported) + * TCON output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_DPAD1] = { + .possible_crtcs = BIT(1) | BIT(0), + .port = 1, + }, + }, +}; + +static const struct rcar_du_device_info rcar_du_r8a7790_info = { + .gen = 2, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .quirks = RCAR_DU_QUIRK_ALIGN_128B, + .channels_mask = BIT(2) | BIT(1) | BIT(0), + .routes = { + /* + * R8A7742 and R8A7790 each have one RGB output and two LVDS + * outputs. Additionally R8A7790 supports one TCON output + * (currently unsupported by the driver). + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(2) | BIT(1) | BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS1] = { + .possible_crtcs = BIT(2) | BIT(1), + .port = 2, + }, + }, + .num_lvds = 2, + .num_rpf = 4, +}; + +/* M2-W (r8a7791) and M2-N (r8a7793) are identical */ +static const struct rcar_du_device_info rcar_du_r8a7791_info = { + .gen = 2, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A779[13] has one RGB output, one LVDS output and one + * (currently unsupported) TCON output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(1) | BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 1, + }, + }, + .num_lvds = 1, + .num_rpf = 4, +}; + +static const struct rcar_du_device_info rcar_du_r8a7792_info = { + .gen = 2, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* R8A7792 has two RGB outputs. */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_DPAD1] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + }, + .num_rpf = 4, +}; + +static const struct rcar_du_device_info rcar_du_r8a7794_info = { + .gen = 2, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A7794 has two RGB outputs and one (currently unsupported) + * TCON output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_DPAD1] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + }, + .num_rpf = 4, +}; + +static const struct rcar_du_device_info rcar_du_r8a7795_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0), + .routes = { + /* + * R8A7795 has one RGB output, two HDMI outputs and one + * LVDS output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(3), + .port = 0, + }, + [RCAR_DU_OUTPUT_HDMI0] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + [RCAR_DU_OUTPUT_HDMI1] = { + .possible_crtcs = BIT(2), + .port = 2, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 3, + }, + }, + .num_lvds = 1, + .num_rpf = 5, + .dpll_mask = BIT(2) | BIT(1), +}; + +static const struct rcar_du_device_info rcar_du_r8a7796_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(2) | BIT(1) | BIT(0), + .routes = { + /* + * R8A7796 has one RGB output, one LVDS output and one HDMI + * output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(2), + .port = 0, + }, + [RCAR_DU_OUTPUT_HDMI0] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 2, + }, + }, + .num_lvds = 1, + .num_rpf = 5, + .dpll_mask = BIT(1), +}; + +static const struct rcar_du_device_info rcar_du_r8a77965_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(3) | BIT(1) | BIT(0), + .routes = { + /* + * R8A77965 has one RGB output, one LVDS output and one HDMI + * output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(2), + .port = 0, + }, + [RCAR_DU_OUTPUT_HDMI0] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 2, + }, + }, + .num_lvds = 1, + .num_rpf = 5, + .dpll_mask = BIT(1), +}; + +static const struct rcar_du_device_info rcar_du_r8a77970_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_INTERLACED + | RCAR_DU_FEATURE_TVM_SYNC, + .channels_mask = BIT(0), + .routes = { + /* + * R8A77970 and R8A77980 have one RGB output and one LVDS + * output. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 1, + }, + }, + .num_lvds = 1, + .num_rpf = 5, +}; + +static const struct rcar_du_device_info rcar_du_r8a7799x_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_CRTC_CLOCK + | RCAR_DU_FEATURE_VSP1_SOURCE, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* + * R8A77990 and R8A77995 have one RGB output and two LVDS + * outputs. + */ + [RCAR_DU_OUTPUT_DPAD0] = { + .possible_crtcs = BIT(0) | BIT(1), + .port = 0, + }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .port = 1, + }, + [RCAR_DU_OUTPUT_LVDS1] = { + .possible_crtcs = BIT(1), + .port = 2, + }, + }, + .num_lvds = 2, + .num_rpf = 5, + .lvds_clk_mask = BIT(1) | BIT(0), +}; + +static const struct rcar_du_device_info rcar_du_r8a779a0_info = { + .gen = 3, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_NO_BLENDING, + .channels_mask = BIT(1) | BIT(0), + .routes = { + /* R8A779A0 has two MIPI DSI outputs. */ + [RCAR_DU_OUTPUT_DSI0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + [RCAR_DU_OUTPUT_DSI1] = { + .possible_crtcs = BIT(1), + .port = 1, + }, + }, + .num_rpf = 5, + .dsi_clk_mask = BIT(1) | BIT(0), +}; + +static const struct of_device_id rcar_du_of_table[] = { + { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info }, + { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, + { .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info }, + { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info }, + { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info }, + { .compatible = "renesas,du-r8a774a1", .data = &rcar_du_r8a774a1_info }, + { .compatible = "renesas,du-r8a774b1", .data = &rcar_du_r8a774b1_info }, + { .compatible = "renesas,du-r8a774c0", .data = &rcar_du_r8a774c0_info }, + { .compatible = "renesas,du-r8a774e1", .data = &rcar_du_r8a774e1_info }, + { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info }, + { .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info }, + { .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info }, + { .compatible = "renesas,du-r8a7792", .data = &rcar_du_r8a7792_info }, + { .compatible = "renesas,du-r8a7793", .data = &rcar_du_r8a7791_info }, + { .compatible = "renesas,du-r8a7794", .data = &rcar_du_r8a7794_info }, + { .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info }, + { .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info }, + { .compatible = "renesas,du-r8a77961", .data = &rcar_du_r8a7796_info }, + { .compatible = "renesas,du-r8a77965", .data = &rcar_du_r8a77965_info }, + { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info }, + { .compatible = "renesas,du-r8a77980", .data = &rcar_du_r8a77970_info }, + { .compatible = "renesas,du-r8a77990", .data = &rcar_du_r8a7799x_info }, + { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info }, + { .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info }, + { } +}; + +MODULE_DEVICE_TABLE(of, rcar_du_of_table); + +const char *rcar_du_output_name(enum rcar_du_output output) +{ + static const char * const names[] = { + [RCAR_DU_OUTPUT_DPAD0] = "DPAD0", + [RCAR_DU_OUTPUT_DPAD1] = "DPAD1", + [RCAR_DU_OUTPUT_DSI0] = "DSI0", + [RCAR_DU_OUTPUT_DSI1] = "DSI1", + [RCAR_DU_OUTPUT_HDMI0] = "HDMI0", + [RCAR_DU_OUTPUT_HDMI1] = "HDMI1", + [RCAR_DU_OUTPUT_LVDS0] = "LVDS0", + [RCAR_DU_OUTPUT_LVDS1] = "LVDS1", + [RCAR_DU_OUTPUT_TCON] = "TCON", + }; + + if (output >= ARRAY_SIZE(names) || !names[output]) + return "UNKNOWN"; + + return names[output]; +} + +/* ----------------------------------------------------------------------------- + * DRM operations + */ + +DEFINE_DRM_GEM_DMA_FOPS(rcar_du_fops); + +static const struct drm_driver rcar_du_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .dumb_create = rcar_du_dumb_create, + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_import_sg_table = rcar_du_gem_prime_import_sg_table, + .gem_prime_mmap = drm_gem_prime_mmap, + .fops = &rcar_du_fops, + .name = "rcar-du", + .desc = "Renesas R-Car Display Unit", + .date = "20130110", + .major = 1, + .minor = 0, +}; + +/* ----------------------------------------------------------------------------- + * Power management + */ + +#ifdef CONFIG_PM_SLEEP +static int rcar_du_pm_suspend(struct device *dev) +{ + struct rcar_du_device *rcdu = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(&rcdu->ddev); +} + +static int rcar_du_pm_resume(struct device *dev) +{ + struct rcar_du_device *rcdu = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(&rcdu->ddev); +} +#endif + +static const struct dev_pm_ops rcar_du_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(rcar_du_pm_suspend, rcar_du_pm_resume) +}; + +/* ----------------------------------------------------------------------------- + * Platform driver + */ + +static int rcar_du_remove(struct platform_device *pdev) +{ + struct rcar_du_device *rcdu = platform_get_drvdata(pdev); + struct drm_device *ddev = &rcdu->ddev; + + drm_dev_unregister(ddev); + drm_atomic_helper_shutdown(ddev); + + drm_kms_helper_poll_fini(ddev); + + return 0; +} + +static void rcar_du_shutdown(struct platform_device *pdev) +{ + struct rcar_du_device *rcdu = platform_get_drvdata(pdev); + + drm_atomic_helper_shutdown(&rcdu->ddev); +} + +static int rcar_du_probe(struct platform_device *pdev) +{ + struct rcar_du_device *rcdu; + unsigned int mask; + int ret; + + if (drm_firmware_drivers_only()) + return -ENODEV; + + /* Allocate and initialize the R-Car device structure. */ + rcdu = devm_drm_dev_alloc(&pdev->dev, &rcar_du_driver, + struct rcar_du_device, ddev); + if (IS_ERR(rcdu)) + return PTR_ERR(rcdu); + + rcdu->dev = &pdev->dev; + rcdu->info = of_device_get_match_data(rcdu->dev); + + platform_set_drvdata(pdev, rcdu); + + /* I/O resources */ + rcdu->mmio = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(rcdu->mmio)) + return PTR_ERR(rcdu->mmio); + + /* + * Set the DMA coherent mask to reflect the DU 32-bit DMA address space + * limitations. When sourcing frames from a VSP the DU doesn't perform + * any memory access so set the mask to 40 bits to accept all buffers. + */ + mask = rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE) ? 40 : 32; + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(mask)); + if (ret) + return ret; + + /* DRM/KMS objects */ + ret = rcar_du_modeset_init(rcdu); + if (ret < 0) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "failed to initialize DRM/KMS (%d)\n", ret); + goto error; + } + + /* + * Register the DRM device with the core and the connectors with + * sysfs. + */ + ret = drm_dev_register(&rcdu->ddev, 0); + if (ret) + goto error; + + DRM_INFO("Device %s probed\n", dev_name(&pdev->dev)); + + drm_fbdev_generic_setup(&rcdu->ddev, 32); + + return 0; + +error: + drm_kms_helper_poll_fini(&rcdu->ddev); + return ret; +} + +static struct platform_driver rcar_du_platform_driver = { + .probe = rcar_du_probe, + .remove = rcar_du_remove, + .shutdown = rcar_du_shutdown, + .driver = { + .name = "rcar-du", + .pm = &rcar_du_pm_ops, + .of_match_table = rcar_du_of_table, + }, +}; + +module_platform_driver(rcar_du_platform_driver); + +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_DESCRIPTION("Renesas R-Car Display Unit DRM Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3