From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/sti/sti_vid.c | 225 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 drivers/gpu/drm/sti/sti_vid.c (limited to 'drivers/gpu/drm/sti/sti_vid.c') diff --git a/drivers/gpu/drm/sti/sti_vid.c b/drivers/gpu/drm/sti/sti_vid.c new file mode 100644 index 000000000..2d8183979 --- /dev/null +++ b/drivers/gpu/drm/sti/sti_vid.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics SA 2014 + * Author: Fabien Dessenne for STMicroelectronics. + */ +#include + +#include +#include +#include + +#include "sti_plane.h" +#include "sti_vid.h" +#include "sti_vtg.h" + +/* Registers */ +#define VID_CTL 0x00 +#define VID_ALP 0x04 +#define VID_CLF 0x08 +#define VID_VPO 0x0C +#define VID_VPS 0x10 +#define VID_KEY1 0x28 +#define VID_KEY2 0x2C +#define VID_MPR0 0x30 +#define VID_MPR1 0x34 +#define VID_MPR2 0x38 +#define VID_MPR3 0x3C +#define VID_MST 0x68 +#define VID_BC 0x70 +#define VID_TINT 0x74 +#define VID_CSAT 0x78 + +/* Registers values */ +#define VID_CTL_IGNORE (BIT(31) | BIT(30)) +#define VID_CTL_PSI_ENABLE (BIT(2) | BIT(1) | BIT(0)) +#define VID_ALP_OPAQUE 0x00000080 +#define VID_BC_DFLT 0x00008000 +#define VID_TINT_DFLT 0x00000000 +#define VID_CSAT_DFLT 0x00000080 +/* YCbCr to RGB BT709: + * R = Y+1.5391Cr + * G = Y-0.4590Cr-0.1826Cb + * B = Y+1.8125Cb */ +#define VID_MPR0_BT709 0x0A800000 +#define VID_MPR1_BT709 0x0AC50000 +#define VID_MPR2_BT709 0x07150545 +#define VID_MPR3_BT709 0x00000AE8 +/* YCbCr to RGB BT709: + * R = Y+1.3711Cr + * G = Y-0.6992Cr-0.3359Cb + * B = Y+1.7344Cb + */ +#define VID_MPR0_BT601 0x0A800000 +#define VID_MPR1_BT601 0x0AAF0000 +#define VID_MPR2_BT601 0x094E0754 +#define VID_MPR3_BT601 0x00000ADD + +#define VID_MIN_HD_HEIGHT 720 + +#define DBGFS_DUMP(reg) seq_printf(s, "\n %-25s 0x%08X", #reg, \ + readl(vid->regs + reg)) + +static void vid_dbg_ctl(struct seq_file *s, int val) +{ + val = val >> 30; + seq_putc(s, '\t'); + + if (!(val & 1)) + seq_puts(s, "NOT "); + seq_puts(s, "ignored on main mixer - "); + + if (!(val & 2)) + seq_puts(s, "NOT "); + seq_puts(s, "ignored on aux mixer"); +} + +static void vid_dbg_vpo(struct seq_file *s, int val) +{ + seq_printf(s, "\txdo:%4d\tydo:%4d", val & 0x0FFF, (val >> 16) & 0x0FFF); +} + +static void vid_dbg_vps(struct seq_file *s, int val) +{ + seq_printf(s, "\txds:%4d\tyds:%4d", val & 0x0FFF, (val >> 16) & 0x0FFF); +} + +static void vid_dbg_mst(struct seq_file *s, int val) +{ + if (val & 1) + seq_puts(s, "\tBUFFER UNDERFLOW!"); +} + +static int vid_dbg_show(struct seq_file *s, void *arg) +{ + struct drm_info_node *node = s->private; + struct sti_vid *vid = (struct sti_vid *)node->info_ent->data; + + seq_printf(s, "VID: (vaddr= 0x%p)", vid->regs); + + DBGFS_DUMP(VID_CTL); + vid_dbg_ctl(s, readl(vid->regs + VID_CTL)); + DBGFS_DUMP(VID_ALP); + DBGFS_DUMP(VID_CLF); + DBGFS_DUMP(VID_VPO); + vid_dbg_vpo(s, readl(vid->regs + VID_VPO)); + DBGFS_DUMP(VID_VPS); + vid_dbg_vps(s, readl(vid->regs + VID_VPS)); + DBGFS_DUMP(VID_KEY1); + DBGFS_DUMP(VID_KEY2); + DBGFS_DUMP(VID_MPR0); + DBGFS_DUMP(VID_MPR1); + DBGFS_DUMP(VID_MPR2); + DBGFS_DUMP(VID_MPR3); + DBGFS_DUMP(VID_MST); + vid_dbg_mst(s, readl(vid->regs + VID_MST)); + DBGFS_DUMP(VID_BC); + DBGFS_DUMP(VID_TINT); + DBGFS_DUMP(VID_CSAT); + seq_putc(s, '\n'); + return 0; +} + +static struct drm_info_list vid_debugfs_files[] = { + { "vid", vid_dbg_show, 0, NULL }, +}; + +void vid_debugfs_init(struct sti_vid *vid, struct drm_minor *minor) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(vid_debugfs_files); i++) + vid_debugfs_files[i].data = vid; + + drm_debugfs_create_files(vid_debugfs_files, + ARRAY_SIZE(vid_debugfs_files), + minor->debugfs_root, minor); +} + +void sti_vid_commit(struct sti_vid *vid, + struct drm_plane_state *state) +{ + struct drm_crtc *crtc = state->crtc; + struct drm_display_mode *mode = &crtc->mode; + int dst_x = state->crtc_x; + int dst_y = state->crtc_y; + int dst_w = clamp_val(state->crtc_w, 0, mode->hdisplay - dst_x); + int dst_h = clamp_val(state->crtc_h, 0, mode->vdisplay - dst_y); + int src_h = state->src_h >> 16; + u32 val, ydo, xdo, yds, xds; + + /* Input / output size + * Align to upper even value */ + dst_w = ALIGN(dst_w, 2); + dst_h = ALIGN(dst_h, 2); + + /* Unmask */ + val = readl(vid->regs + VID_CTL); + val &= ~VID_CTL_IGNORE; + writel(val, vid->regs + VID_CTL); + + ydo = sti_vtg_get_line_number(*mode, dst_y); + yds = sti_vtg_get_line_number(*mode, dst_y + dst_h - 1); + xdo = sti_vtg_get_pixel_number(*mode, dst_x); + xds = sti_vtg_get_pixel_number(*mode, dst_x + dst_w - 1); + + writel((ydo << 16) | xdo, vid->regs + VID_VPO); + writel((yds << 16) | xds, vid->regs + VID_VPS); + + /* Color conversion parameters */ + if (src_h >= VID_MIN_HD_HEIGHT) { + writel(VID_MPR0_BT709, vid->regs + VID_MPR0); + writel(VID_MPR1_BT709, vid->regs + VID_MPR1); + writel(VID_MPR2_BT709, vid->regs + VID_MPR2); + writel(VID_MPR3_BT709, vid->regs + VID_MPR3); + } else { + writel(VID_MPR0_BT601, vid->regs + VID_MPR0); + writel(VID_MPR1_BT601, vid->regs + VID_MPR1); + writel(VID_MPR2_BT601, vid->regs + VID_MPR2); + writel(VID_MPR3_BT601, vid->regs + VID_MPR3); + } +} + +void sti_vid_disable(struct sti_vid *vid) +{ + u32 val; + + /* Mask */ + val = readl(vid->regs + VID_CTL); + val |= VID_CTL_IGNORE; + writel(val, vid->regs + VID_CTL); +} + +static void sti_vid_init(struct sti_vid *vid) +{ + /* Enable PSI, Mask layer */ + writel(VID_CTL_PSI_ENABLE | VID_CTL_IGNORE, vid->regs + VID_CTL); + + /* Opaque */ + writel(VID_ALP_OPAQUE, vid->regs + VID_ALP); + + /* Brightness, contrast, tint, saturation */ + writel(VID_BC_DFLT, vid->regs + VID_BC); + writel(VID_TINT_DFLT, vid->regs + VID_TINT); + writel(VID_CSAT_DFLT, vid->regs + VID_CSAT); +} + +struct sti_vid *sti_vid_create(struct device *dev, struct drm_device *drm_dev, + int id, void __iomem *baseaddr) +{ + struct sti_vid *vid; + + vid = devm_kzalloc(dev, sizeof(*vid), GFP_KERNEL); + if (!vid) { + DRM_ERROR("Failed to allocate memory for VID\n"); + return NULL; + } + + vid->dev = dev; + vid->regs = baseaddr; + vid->id = id; + + sti_vid_init(vid); + + return vid; +} -- cgit v1.2.3