From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/sun4i/sun4i_hdmi.h | 297 +++++++++++++++++++++++++++++++++++++ 1 file changed, 297 insertions(+) create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi.h (limited to 'drivers/gpu/drm/sun4i/sun4i_hdmi.h') diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h new file mode 100644 index 000000000..65c801cd6 --- /dev/null +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h @@ -0,0 +1,297 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2016 Maxime Ripard + * + * Maxime Ripard + */ + +#ifndef _SUN4I_HDMI_H_ +#define _SUN4I_HDMI_H_ + +#include +#include +#include + +#include + +#define SUN4I_HDMI_CTRL_REG 0x004 +#define SUN4I_HDMI_CTRL_ENABLE BIT(31) + +#define SUN4I_HDMI_IRQ_REG 0x008 +#define SUN4I_HDMI_IRQ_STA_MASK 0x73 +#define SUN4I_HDMI_IRQ_STA_FIFO_OF BIT(1) +#define SUN4I_HDMI_IRQ_STA_FIFO_UF BIT(0) + +#define SUN4I_HDMI_HPD_REG 0x00c +#define SUN4I_HDMI_HPD_HIGH BIT(0) + +#define SUN4I_HDMI_VID_CTRL_REG 0x010 +#define SUN4I_HDMI_VID_CTRL_ENABLE BIT(31) +#define SUN4I_HDMI_VID_CTRL_HDMI_MODE BIT(30) + +#define SUN4I_HDMI_VID_TIMING_ACT_REG 0x014 +#define SUN4I_HDMI_VID_TIMING_BP_REG 0x018 +#define SUN4I_HDMI_VID_TIMING_FP_REG 0x01c +#define SUN4I_HDMI_VID_TIMING_SPW_REG 0x020 + +#define SUN4I_HDMI_VID_TIMING_X(x) ((((x) - 1) & GENMASK(11, 0))) +#define SUN4I_HDMI_VID_TIMING_Y(y) ((((y) - 1) & GENMASK(11, 0)) << 16) + +#define SUN4I_HDMI_VID_TIMING_POL_REG 0x024 +#define SUN4I_HDMI_VID_TIMING_POL_TX_CLK (0x3e0 << 16) +#define SUN4I_HDMI_VID_TIMING_POL_VSYNC BIT(1) +#define SUN4I_HDMI_VID_TIMING_POL_HSYNC BIT(0) + +#define SUN4I_HDMI_AVI_INFOFRAME_REG(n) (0x080 + (n)) + +#define SUN4I_HDMI_PAD_CTRL0_REG 0x200 +#define SUN4I_HDMI_PAD_CTRL0_BIASEN BIT(31) +#define SUN4I_HDMI_PAD_CTRL0_LDOCEN BIT(30) +#define SUN4I_HDMI_PAD_CTRL0_LDODEN BIT(29) +#define SUN4I_HDMI_PAD_CTRL0_PWENC BIT(28) +#define SUN4I_HDMI_PAD_CTRL0_PWEND BIT(27) +#define SUN4I_HDMI_PAD_CTRL0_PWENG BIT(26) +#define SUN4I_HDMI_PAD_CTRL0_CKEN BIT(25) +#define SUN4I_HDMI_PAD_CTRL0_TXEN BIT(23) + +#define SUN4I_HDMI_PAD_CTRL1_REG 0x204 +#define SUN4I_HDMI_PAD_CTRL1_UNKNOWN BIT(24) /* set on A31 */ +#define SUN4I_HDMI_PAD_CTRL1_AMP_OPT BIT(23) +#define SUN4I_HDMI_PAD_CTRL1_AMPCK_OPT BIT(22) +#define SUN4I_HDMI_PAD_CTRL1_EMP_OPT BIT(20) +#define SUN4I_HDMI_PAD_CTRL1_EMPCK_OPT BIT(19) +#define SUN4I_HDMI_PAD_CTRL1_PWSCK BIT(18) +#define SUN4I_HDMI_PAD_CTRL1_PWSDT BIT(17) +#define SUN4I_HDMI_PAD_CTRL1_REG_DEN BIT(15) +#define SUN4I_HDMI_PAD_CTRL1_REG_DENCK BIT(14) +#define SUN4I_HDMI_PAD_CTRL1_REG_EMP(n) (((n) & 7) << 10) +#define SUN4I_HDMI_PAD_CTRL1_HALVE_CLK BIT(6) +#define SUN4I_HDMI_PAD_CTRL1_REG_AMP(n) (((n) & 7) << 3) + +/* These bits seem to invert the TMDS data channels */ +#define SUN4I_HDMI_PAD_CTRL1_INVERT_R BIT(2) +#define SUN4I_HDMI_PAD_CTRL1_INVERT_G BIT(1) +#define SUN4I_HDMI_PAD_CTRL1_INVERT_B BIT(0) + +#define SUN4I_HDMI_PLL_CTRL_REG 0x208 +#define SUN4I_HDMI_PLL_CTRL_PLL_EN BIT(31) +#define SUN4I_HDMI_PLL_CTRL_BWS BIT(30) +#define SUN4I_HDMI_PLL_CTRL_HV_IS_33 BIT(29) +#define SUN4I_HDMI_PLL_CTRL_LDO1_EN BIT(28) +#define SUN4I_HDMI_PLL_CTRL_LDO2_EN BIT(27) +#define SUN4I_HDMI_PLL_CTRL_SDIV2 BIT(25) +#define SUN4I_HDMI_PLL_CTRL_VCO_GAIN(n) (((n) & 7) << 20) +#define SUN4I_HDMI_PLL_CTRL_S(n) (((n) & 7) << 17) +#define SUN4I_HDMI_PLL_CTRL_CP_S(n) (((n) & 0x1f) << 12) +#define SUN4I_HDMI_PLL_CTRL_CS(n) (((n) & 0xf) << 8) +#define SUN4I_HDMI_PLL_CTRL_DIV(n) (((n) & 0xf) << 4) +#define SUN4I_HDMI_PLL_CTRL_DIV_MASK GENMASK(7, 4) +#define SUN4I_HDMI_PLL_CTRL_VCO_S(n) ((n) & 0xf) + +#define SUN4I_HDMI_PLL_DBG0_REG 0x20c +#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT(n) (((n) & 1) << 21) +#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK BIT(21) +#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_SHIFT 21 + +#define SUN4I_HDMI_CEC 0x214 +#define SUN4I_HDMI_CEC_ENABLE BIT(11) +#define SUN4I_HDMI_CEC_TX BIT(9) +#define SUN4I_HDMI_CEC_RX BIT(8) + +#define SUN4I_HDMI_PKT_CTRL_REG(n) (0x2f0 + (4 * (n))) +#define SUN4I_HDMI_PKT_CTRL_TYPE(n, t) ((t) << (((n) % 4) * 4)) + +#define SUN4I_HDMI_UNKNOWN_REG 0x300 +#define SUN4I_HDMI_UNKNOWN_INPUT_SYNC BIT(27) + +#define SUN4I_HDMI_DDC_CTRL_REG 0x500 +#define SUN4I_HDMI_DDC_CTRL_ENABLE BIT(31) +#define SUN4I_HDMI_DDC_CTRL_START_CMD BIT(30) +#define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK BIT(8) +#define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE (1 << 8) +#define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ (0 << 8) +#define SUN4I_HDMI_DDC_CTRL_RESET BIT(0) + +#define SUN4I_HDMI_DDC_ADDR_REG 0x504 +#define SUN4I_HDMI_DDC_ADDR_SEGMENT(seg) (((seg) & 0xff) << 24) +#define SUN4I_HDMI_DDC_ADDR_EDDC(addr) (((addr) & 0xff) << 16) +#define SUN4I_HDMI_DDC_ADDR_OFFSET(off) (((off) & 0xff) << 8) +#define SUN4I_HDMI_DDC_ADDR_SLAVE(addr) ((addr) & 0xff) + +#define SUN4I_HDMI_DDC_INT_STATUS_REG 0x50c +#define SUN4I_HDMI_DDC_INT_STATUS_ILLEGAL_FIFO_OPERATION BIT(7) +#define SUN4I_HDMI_DDC_INT_STATUS_DDC_RX_FIFO_UNDERFLOW BIT(6) +#define SUN4I_HDMI_DDC_INT_STATUS_DDC_TX_FIFO_OVERFLOW BIT(5) +#define SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST BIT(4) +#define SUN4I_HDMI_DDC_INT_STATUS_ARBITRATION_ERROR BIT(3) +#define SUN4I_HDMI_DDC_INT_STATUS_ACK_ERROR BIT(2) +#define SUN4I_HDMI_DDC_INT_STATUS_BUS_ERROR BIT(1) +#define SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE BIT(0) + +#define SUN4I_HDMI_DDC_FIFO_CTRL_REG 0x510 +#define SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR BIT(31) +#define SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES(n) (((n) & 0xf) << 4) +#define SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MASK GENMASK(7, 4) +#define SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MAX (BIT(4) - 1) +#define SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES(n) ((n) & 0xf) +#define SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES_MASK GENMASK(3, 0) +#define SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES_MAX (BIT(4) - 1) + +#define SUN4I_HDMI_DDC_FIFO_DATA_REG 0x518 + +#define SUN4I_HDMI_DDC_BYTE_COUNT_REG 0x51c +#define SUN4I_HDMI_DDC_BYTE_COUNT_MAX (BIT(10) - 1) + +#define SUN4I_HDMI_DDC_CMD_REG 0x520 +#define SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ 6 +#define SUN4I_HDMI_DDC_CMD_IMPLICIT_READ 5 +#define SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE 3 + +#define SUN4I_HDMI_DDC_CLK_REG 0x528 +#define SUN4I_HDMI_DDC_CLK_M(m) (((m) & 0xf) << 3) +#define SUN4I_HDMI_DDC_CLK_N(n) ((n) & 0x7) + +#define SUN4I_HDMI_DDC_LINE_CTRL_REG 0x540 +#define SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE BIT(9) +#define SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE BIT(8) + +#define SUN4I_HDMI_DDC_FIFO_SIZE 16 + +/* A31 specific */ +#define SUN6I_HDMI_DDC_CTRL_REG 0x500 +#define SUN6I_HDMI_DDC_CTRL_RESET BIT(31) +#define SUN6I_HDMI_DDC_CTRL_START_CMD BIT(27) +#define SUN6I_HDMI_DDC_CTRL_SDA_ENABLE BIT(6) +#define SUN6I_HDMI_DDC_CTRL_SCL_ENABLE BIT(4) +#define SUN6I_HDMI_DDC_CTRL_ENABLE BIT(0) + +#define SUN6I_HDMI_DDC_CMD_REG 0x508 +#define SUN6I_HDMI_DDC_CMD_BYTE_COUNT(count) ((count) << 16) +/* command types in lower 3 bits are the same as sun4i */ + +#define SUN6I_HDMI_DDC_ADDR_REG 0x50c +#define SUN6I_HDMI_DDC_ADDR_SEGMENT(seg) (((seg) & 0xff) << 24) +#define SUN6I_HDMI_DDC_ADDR_EDDC(addr) (((addr) & 0xff) << 16) +#define SUN6I_HDMI_DDC_ADDR_OFFSET(off) (((off) & 0xff) << 8) +#define SUN6I_HDMI_DDC_ADDR_SLAVE(addr) (((addr) & 0xff) << 1) + +#define SUN6I_HDMI_DDC_INT_STATUS_REG 0x514 +#define SUN6I_HDMI_DDC_INT_STATUS_TIMEOUT BIT(8) +/* lower 8 bits are the same as sun4i */ + +#define SUN6I_HDMI_DDC_FIFO_CTRL_REG 0x518 +#define SUN6I_HDMI_DDC_FIFO_CTRL_CLEAR BIT(15) +/* lower 9 bits are the same as sun4i */ + +#define SUN6I_HDMI_DDC_CLK_REG 0x520 +/* DDC CLK bit fields are the same, but the formula is not */ + +#define SUN6I_HDMI_DDC_FIFO_DATA_REG 0x580 + +enum sun4i_hdmi_pkt_type { + SUN4I_HDMI_PKT_AVI = 2, + SUN4I_HDMI_PKT_END = 15, +}; + +struct sun4i_hdmi_variant { + bool has_ddc_parent_clk; + bool has_reset_control; + + u32 pad_ctrl0_init_val; + u32 pad_ctrl1_init_val; + u32 pll_ctrl_init_val; + + struct reg_field ddc_clk_reg; + u8 ddc_clk_pre_divider; + u8 ddc_clk_m_offset; + + u8 tmds_clk_div_offset; + + /* Register fields for I2C adapter */ + struct reg_field field_ddc_en; + struct reg_field field_ddc_start; + struct reg_field field_ddc_reset; + struct reg_field field_ddc_addr_reg; + struct reg_field field_ddc_slave_addr; + struct reg_field field_ddc_int_mask; + struct reg_field field_ddc_int_status; + struct reg_field field_ddc_fifo_clear; + struct reg_field field_ddc_fifo_rx_thres; + struct reg_field field_ddc_fifo_tx_thres; + struct reg_field field_ddc_byte_count; + struct reg_field field_ddc_cmd; + struct reg_field field_ddc_sda_en; + struct reg_field field_ddc_sck_en; + + /* DDC FIFO register offset */ + u32 ddc_fifo_reg; + + /* + * DDC FIFO threshold boundary conditions + * + * This is used to cope with the threshold boundary condition + * being slightly different on sun5i and sun6i. + * + * On sun5i the threshold is exclusive, i.e. does not include, + * the value of the threshold. ( > for RX; < for TX ) + * On sun6i the threshold is inclusive, i.e. includes, the + * value of the threshold. ( >= for RX; <= for TX ) + */ + bool ddc_fifo_thres_incl; + + bool ddc_fifo_has_dir; +}; + +struct sun4i_hdmi { + struct drm_connector connector; + struct drm_encoder encoder; + struct device *dev; + + void __iomem *base; + struct regmap *regmap; + + /* Reset control */ + struct reset_control *reset; + + /* Parent clocks */ + struct clk *bus_clk; + struct clk *mod_clk; + struct clk *ddc_parent_clk; + struct clk *pll0_clk; + struct clk *pll1_clk; + + /* And the clocks we create */ + struct clk *ddc_clk; + struct clk *tmds_clk; + + struct i2c_adapter *i2c; + struct i2c_adapter *ddc_i2c; + + /* Regmap fields for I2C adapter */ + struct regmap_field *field_ddc_en; + struct regmap_field *field_ddc_start; + struct regmap_field *field_ddc_reset; + struct regmap_field *field_ddc_addr_reg; + struct regmap_field *field_ddc_slave_addr; + struct regmap_field *field_ddc_int_mask; + struct regmap_field *field_ddc_int_status; + struct regmap_field *field_ddc_fifo_clear; + struct regmap_field *field_ddc_fifo_rx_thres; + struct regmap_field *field_ddc_fifo_tx_thres; + struct regmap_field *field_ddc_byte_count; + struct regmap_field *field_ddc_cmd; + struct regmap_field *field_ddc_sda_en; + struct regmap_field *field_ddc_sck_en; + + struct sun4i_drv *drv; + + struct cec_adapter *cec_adap; + + const struct sun4i_hdmi_variant *variant; +}; + +int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *clk); +int sun4i_tmds_create(struct sun4i_hdmi *hdmi); +int sun4i_hdmi_i2c_create(struct device *dev, struct sun4i_hdmi *hdmi); + +#endif /* _SUN4I_HDMI_H_ */ -- cgit v1.2.3