From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 248 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 248 insertions(+) create mode 100644 drivers/gpu/drm/sun4i/sun4i_rgb.c (limited to 'drivers/gpu/drm/sun4i/sun4i_rgb.c') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c new file mode 100644 index 000000000..dfb6acc42 --- /dev/null +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2015 Free Electrons + * Copyright (C) 2015 NextThing Co + * + * Maxime Ripard + */ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "sun4i_crtc.h" +#include "sun4i_tcon.h" +#include "sun4i_rgb.h" + +struct sun4i_rgb { + struct drm_connector connector; + struct drm_encoder encoder; + + struct sun4i_tcon *tcon; + struct drm_panel *panel; + struct drm_bridge *bridge; +}; + +static inline struct sun4i_rgb * +drm_connector_to_sun4i_rgb(struct drm_connector *connector) +{ + return container_of(connector, struct sun4i_rgb, + connector); +} + +static inline struct sun4i_rgb * +drm_encoder_to_sun4i_rgb(struct drm_encoder *encoder) +{ + return container_of(encoder, struct sun4i_rgb, + encoder); +} + +static int sun4i_rgb_get_modes(struct drm_connector *connector) +{ + struct sun4i_rgb *rgb = + drm_connector_to_sun4i_rgb(connector); + + return drm_panel_get_modes(rgb->panel, connector); +} + +/* + * VESA DMT defines a tolerance of 0.5% on the pixel clock, while the + * CVT spec reuses that tolerance in its examples, so it looks to be a + * good default tolerance for the EDID-based modes. Define it to 5 per + * mille to avoid floating point operations. + */ +#define SUN4I_RGB_DOTCLOCK_TOLERANCE_PER_MILLE 5 + +static enum drm_mode_status sun4i_rgb_mode_valid(struct drm_encoder *crtc, + const struct drm_display_mode *mode) +{ + struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(crtc); + struct sun4i_tcon *tcon = rgb->tcon; + u32 hsync = mode->hsync_end - mode->hsync_start; + u32 vsync = mode->vsync_end - mode->vsync_start; + unsigned long long rate = mode->clock * 1000; + unsigned long long lowest, highest; + unsigned long long rounded_rate; + + DRM_DEBUG_DRIVER("Validating modes...\n"); + + if (hsync < 1) + return MODE_HSYNC_NARROW; + + if (hsync > 0x3ff) + return MODE_HSYNC_WIDE; + + if ((mode->hdisplay < 1) || (mode->htotal < 1)) + return MODE_H_ILLEGAL; + + if ((mode->hdisplay > 0x7ff) || (mode->htotal > 0xfff)) + return MODE_BAD_HVALUE; + + DRM_DEBUG_DRIVER("Horizontal parameters OK\n"); + + if (vsync < 1) + return MODE_VSYNC_NARROW; + + if (vsync > 0x3ff) + return MODE_VSYNC_WIDE; + + if ((mode->vdisplay < 1) || (mode->vtotal < 1)) + return MODE_V_ILLEGAL; + + if ((mode->vdisplay > 0x7ff) || (mode->vtotal > 0xfff)) + return MODE_BAD_VVALUE; + + DRM_DEBUG_DRIVER("Vertical parameters OK\n"); + + /* + * TODO: We should use the struct display_timing if available + * and / or trying to stretch the timings within that + * tolerancy to take care of panels that we wouldn't be able + * to have a exact match for. + */ + if (rgb->panel) { + DRM_DEBUG_DRIVER("RGB panel used, skipping clock rate checks"); + goto out; + } + + /* + * That shouldn't ever happen unless something is really wrong, but it + * doesn't harm to check. + */ + if (!rgb->bridge) + goto out; + + tcon->dclk_min_div = 6; + tcon->dclk_max_div = 127; + rounded_rate = clk_round_rate(tcon->dclk, rate); + + lowest = rate * (1000 - SUN4I_RGB_DOTCLOCK_TOLERANCE_PER_MILLE); + do_div(lowest, 1000); + if (rounded_rate < lowest) + return MODE_CLOCK_LOW; + + highest = rate * (1000 + SUN4I_RGB_DOTCLOCK_TOLERANCE_PER_MILLE); + do_div(highest, 1000); + if (rounded_rate > highest) + return MODE_CLOCK_HIGH; + +out: + DRM_DEBUG_DRIVER("Clock rate OK\n"); + + return MODE_OK; +} + +static const struct drm_connector_helper_funcs sun4i_rgb_con_helper_funcs = { + .get_modes = sun4i_rgb_get_modes, +}; + +static void +sun4i_rgb_connector_destroy(struct drm_connector *connector) +{ + drm_connector_cleanup(connector); +} + +static const struct drm_connector_funcs sun4i_rgb_con_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = sun4i_rgb_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder) +{ + struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(encoder); + + DRM_DEBUG_DRIVER("Enabling RGB output\n"); + + if (rgb->panel) { + drm_panel_prepare(rgb->panel); + drm_panel_enable(rgb->panel); + } +} + +static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) +{ + struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(encoder); + + DRM_DEBUG_DRIVER("Disabling RGB output\n"); + + if (rgb->panel) { + drm_panel_disable(rgb->panel); + drm_panel_unprepare(rgb->panel); + } +} + +static const struct drm_encoder_helper_funcs sun4i_rgb_enc_helper_funcs = { + .disable = sun4i_rgb_encoder_disable, + .enable = sun4i_rgb_encoder_enable, + .mode_valid = sun4i_rgb_mode_valid, +}; + +int sun4i_rgb_init(struct drm_device *drm, struct sun4i_tcon *tcon) +{ + struct drm_encoder *encoder; + struct sun4i_rgb *rgb; + int ret; + + rgb = devm_kzalloc(drm->dev, sizeof(*rgb), GFP_KERNEL); + if (!rgb) + return -ENOMEM; + rgb->tcon = tcon; + encoder = &rgb->encoder; + + ret = drm_of_find_panel_or_bridge(tcon->dev->of_node, 1, 0, + &rgb->panel, &rgb->bridge); + if (ret) { + dev_info(drm->dev, "No panel or bridge found... RGB output disabled\n"); + return 0; + } + + drm_encoder_helper_add(&rgb->encoder, + &sun4i_rgb_enc_helper_funcs); + ret = drm_simple_encoder_init(drm, &rgb->encoder, + DRM_MODE_ENCODER_NONE); + if (ret) { + dev_err(drm->dev, "Couldn't initialise the rgb encoder\n"); + goto err_out; + } + + /* The RGB encoder can only work with the TCON channel 0 */ + rgb->encoder.possible_crtcs = drm_crtc_mask(&tcon->crtc->crtc); + + if (rgb->panel) { + drm_connector_helper_add(&rgb->connector, + &sun4i_rgb_con_helper_funcs); + ret = drm_connector_init(drm, &rgb->connector, + &sun4i_rgb_con_funcs, + DRM_MODE_CONNECTOR_Unknown); + if (ret) { + dev_err(drm->dev, "Couldn't initialise the rgb connector\n"); + goto err_cleanup_connector; + } + + drm_connector_attach_encoder(&rgb->connector, + &rgb->encoder); + } + + if (rgb->bridge) { + ret = drm_bridge_attach(encoder, rgb->bridge, NULL, 0); + if (ret) + goto err_cleanup_connector; + } + + return 0; + +err_cleanup_connector: + drm_encoder_cleanup(&rgb->encoder); +err_out: + return ret; +} +EXPORT_SYMBOL(sun4i_rgb_init); -- cgit v1.2.3