From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/tegra/dsi.h | 143 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 drivers/gpu/drm/tegra/dsi.h (limited to 'drivers/gpu/drm/tegra/dsi.h') diff --git a/drivers/gpu/drm/tegra/dsi.h b/drivers/gpu/drm/tegra/dsi.h new file mode 100644 index 000000000..f39594e65 --- /dev/null +++ b/drivers/gpu/drm/tegra/dsi.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013 NVIDIA Corporation + */ + +#ifndef DRM_TEGRA_DSI_H +#define DRM_TEGRA_DSI_H + +#define DSI_INCR_SYNCPT 0x00 +#define DSI_INCR_SYNCPT_CONTROL 0x01 +#define DSI_INCR_SYNCPT_ERROR 0x02 +#define DSI_CTXSW 0x08 +#define DSI_RD_DATA 0x09 +#define DSI_WR_DATA 0x0a +#define DSI_POWER_CONTROL 0x0b +#define DSI_POWER_CONTROL_ENABLE (1 << 0) +#define DSI_INT_ENABLE 0x0c +#define DSI_INT_STATUS 0x0d +#define DSI_INT_MASK 0x0e +#define DSI_HOST_CONTROL 0x0f +#define DSI_HOST_CONTROL_FIFO_RESET (1 << 21) +#define DSI_HOST_CONTROL_CRC_RESET (1 << 20) +#define DSI_HOST_CONTROL_TX_TRIG_SOL (0 << 12) +#define DSI_HOST_CONTROL_TX_TRIG_FIFO (1 << 12) +#define DSI_HOST_CONTROL_TX_TRIG_HOST (2 << 12) +#define DSI_HOST_CONTROL_RAW (1 << 6) +#define DSI_HOST_CONTROL_HS (1 << 5) +#define DSI_HOST_CONTROL_FIFO_SEL (1 << 4) +#define DSI_HOST_CONTROL_IMM_BTA (1 << 3) +#define DSI_HOST_CONTROL_PKT_BTA (1 << 2) +#define DSI_HOST_CONTROL_CS (1 << 1) +#define DSI_HOST_CONTROL_ECC (1 << 0) +#define DSI_CONTROL 0x10 +#define DSI_CONTROL_HS_CLK_CTRL (1 << 20) +#define DSI_CONTROL_CHANNEL(c) (((c) & 0x3) << 16) +#define DSI_CONTROL_FORMAT(f) (((f) & 0x3) << 12) +#define DSI_CONTROL_TX_TRIG(x) (((x) & 0x3) << 8) +#define DSI_CONTROL_LANES(n) (((n) & 0x3) << 4) +#define DSI_CONTROL_DCS_ENABLE (1 << 3) +#define DSI_CONTROL_SOURCE(s) (((s) & 0x1) << 2) +#define DSI_CONTROL_VIDEO_ENABLE (1 << 1) +#define DSI_CONTROL_HOST_ENABLE (1 << 0) +#define DSI_SOL_DELAY 0x11 +#define DSI_MAX_THRESHOLD 0x12 +#define DSI_TRIGGER 0x13 +#define DSI_TRIGGER_HOST (1 << 1) +#define DSI_TRIGGER_VIDEO (1 << 0) +#define DSI_TX_CRC 0x14 +#define DSI_STATUS 0x15 +#define DSI_STATUS_IDLE (1 << 10) +#define DSI_STATUS_UNDERFLOW (1 << 9) +#define DSI_STATUS_OVERFLOW (1 << 8) +#define DSI_INIT_SEQ_CONTROL 0x1a +#define DSI_INIT_SEQ_DATA_0 0x1b +#define DSI_INIT_SEQ_DATA_1 0x1c +#define DSI_INIT_SEQ_DATA_2 0x1d +#define DSI_INIT_SEQ_DATA_3 0x1e +#define DSI_INIT_SEQ_DATA_4 0x1f +#define DSI_INIT_SEQ_DATA_5 0x20 +#define DSI_INIT_SEQ_DATA_6 0x21 +#define DSI_INIT_SEQ_DATA_7 0x22 +#define DSI_PKT_SEQ_0_LO 0x23 +#define DSI_PKT_SEQ_0_HI 0x24 +#define DSI_PKT_SEQ_1_LO 0x25 +#define DSI_PKT_SEQ_1_HI 0x26 +#define DSI_PKT_SEQ_2_LO 0x27 +#define DSI_PKT_SEQ_2_HI 0x28 +#define DSI_PKT_SEQ_3_LO 0x29 +#define DSI_PKT_SEQ_3_HI 0x2a +#define DSI_PKT_SEQ_4_LO 0x2b +#define DSI_PKT_SEQ_4_HI 0x2c +#define DSI_PKT_SEQ_5_LO 0x2d +#define DSI_PKT_SEQ_5_HI 0x2e +#define DSI_DCS_CMDS 0x33 +#define DSI_PKT_LEN_0_1 0x34 +#define DSI_PKT_LEN_2_3 0x35 +#define DSI_PKT_LEN_4_5 0x36 +#define DSI_PKT_LEN_6_7 0x37 +#define DSI_PHY_TIMING_0 0x3c +#define DSI_PHY_TIMING_1 0x3d +#define DSI_PHY_TIMING_2 0x3e +#define DSI_BTA_TIMING 0x3f + +#define DSI_TIMING_FIELD(value, period, hwinc) \ + ((DIV_ROUND_CLOSEST(value, period) - (hwinc)) & 0xff) + +#define DSI_TIMEOUT_0 0x44 +#define DSI_TIMEOUT_LRX(x) (((x) & 0xffff) << 16) +#define DSI_TIMEOUT_HTX(x) (((x) & 0xffff) << 0) +#define DSI_TIMEOUT_1 0x45 +#define DSI_TIMEOUT_PR(x) (((x) & 0xffff) << 16) +#define DSI_TIMEOUT_TA(x) (((x) & 0xffff) << 0) +#define DSI_TO_TALLY 0x46 +#define DSI_TALLY_TA(x) (((x) & 0xff) << 16) +#define DSI_TALLY_LRX(x) (((x) & 0xff) << 8) +#define DSI_TALLY_HTX(x) (((x) & 0xff) << 0) +#define DSI_PAD_CONTROL_0 0x4b +#define DSI_PAD_CONTROL_VS1_PDIO(x) (((x) & 0xf) << 0) +#define DSI_PAD_CONTROL_VS1_PDIO_CLK (1 << 8) +#define DSI_PAD_CONTROL_VS1_PULLDN(x) (((x) & 0xf) << 16) +#define DSI_PAD_CONTROL_VS1_PULLDN_CLK (1 << 24) +#define DSI_PAD_CONTROL_CD 0x4c +#define DSI_PAD_CD_STATUS 0x4d +#define DSI_VIDEO_MODE_CONTROL 0x4e +#define DSI_PAD_CONTROL_1 0x4f +#define DSI_PAD_CONTROL_2 0x50 +#define DSI_PAD_OUT_CLK(x) (((x) & 0x7) << 0) +#define DSI_PAD_LP_DN(x) (((x) & 0x7) << 4) +#define DSI_PAD_LP_UP(x) (((x) & 0x7) << 8) +#define DSI_PAD_SLEW_DN(x) (((x) & 0x7) << 12) +#define DSI_PAD_SLEW_UP(x) (((x) & 0x7) << 16) +#define DSI_PAD_CONTROL_3 0x51 +#define DSI_PAD_PREEMP_PD_CLK(x) (((x) & 0x3) << 12) +#define DSI_PAD_PREEMP_PU_CLK(x) (((x) & 0x3) << 8) +#define DSI_PAD_PREEMP_PD(x) (((x) & 0x3) << 4) +#define DSI_PAD_PREEMP_PU(x) (((x) & 0x3) << 0) +#define DSI_PAD_CONTROL_4 0x52 +#define DSI_GANGED_MODE_CONTROL 0x53 +#define DSI_GANGED_MODE_CONTROL_ENABLE (1 << 0) +#define DSI_GANGED_MODE_START 0x54 +#define DSI_GANGED_MODE_SIZE 0x55 +#define DSI_RAW_DATA_BYTE_COUNT 0x56 +#define DSI_ULTRA_LOW_POWER_CONTROL 0x57 +#define DSI_INIT_SEQ_DATA_8 0x58 +#define DSI_INIT_SEQ_DATA_9 0x59 +#define DSI_INIT_SEQ_DATA_10 0x5a +#define DSI_INIT_SEQ_DATA_11 0x5b +#define DSI_INIT_SEQ_DATA_12 0x5c +#define DSI_INIT_SEQ_DATA_13 0x5d +#define DSI_INIT_SEQ_DATA_14 0x5e +#define DSI_INIT_SEQ_DATA_15 0x5f + +/* + * pixel format as used in the DSI_CONTROL_FORMAT field + */ +enum tegra_dsi_format { + TEGRA_DSI_FORMAT_16P, + TEGRA_DSI_FORMAT_18NP, + TEGRA_DSI_FORMAT_18P, + TEGRA_DSI_FORMAT_24P, +}; + +#endif -- cgit v1.2.3