From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/tilcdc/tilcdc_drv.h | 173 ++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_drv.h (limited to 'drivers/gpu/drm/tilcdc/tilcdc_drv.h') diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h new file mode 100644 index 000000000..b818448c8 --- /dev/null +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -0,0 +1,173 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark + */ + +#ifndef __TILCDC_DRV_H__ +#define __TILCDC_DRV_H__ + +#include +#include + +#include + +struct clk; +struct workqueue_struct; + +struct drm_connector; +struct drm_connector_helper_funcs; +struct drm_crtc; +struct drm_device; +struct drm_display_mode; +struct drm_encoder; +struct drm_framebuffer; +struct drm_minor; +struct drm_pending_vblank_event; +struct drm_plane; + +/* Defaulting to pixel clock defined on AM335x */ +#define TILCDC_DEFAULT_MAX_PIXELCLOCK 126000 +/* Maximum display width for LCDC V1 */ +#define TILCDC_DEFAULT_MAX_WIDTH_V1 1024 +/* ... and for LCDC V2 found on AM335x: */ +#define TILCDC_DEFAULT_MAX_WIDTH_V2 2048 +/* + * This may need some tweaking, but want to allow at least 1280x1024@60 + * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to + * be supportable + */ +#define TILCDC_DEFAULT_MAX_BANDWIDTH (1280*1024*60) + + +struct tilcdc_drm_private { + void __iomem *mmio; + + struct clk *clk; /* functional clock */ + int rev; /* IP revision */ + + unsigned int irq; + + /* don't attempt resolutions w/ higher W * H * Hz: */ + uint32_t max_bandwidth; + /* + * Pixel Clock will be restricted to some value as + * defined in the device datasheet measured in KHz + */ + uint32_t max_pixelclock; + /* + * Max allowable width is limited on a per device basis + * measured in pixels + */ + uint32_t max_width; + + /* Supported pixel formats */ + const uint32_t *pixelformats; + uint32_t num_pixelformats; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif + + struct workqueue_struct *wq; + + struct drm_crtc *crtc; + + unsigned int num_encoders; + struct drm_encoder *encoders[8]; + + unsigned int num_connectors; + struct drm_connector *connectors[8]; + + struct drm_encoder *external_encoder; + struct drm_connector *external_connector; + + bool is_registered; + bool is_componentized; + bool irq_enabled; +}; + +/* Sub-module for display. Since we don't know at compile time what panels + * or display adapter(s) might be present (for ex, off chip dvi/tfp410, + * hdmi encoder, various lcd panels), the connector/encoder(s) are split into + * separate drivers. If they are probed and found to be present, they + * register themselves with tilcdc_register_module(). + */ +struct tilcdc_module; + +struct tilcdc_module_ops { + /* create appropriate encoders/connectors: */ + int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev); +#ifdef CONFIG_DEBUG_FS + /* create debugfs nodes (can be NULL): */ + int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor); +#endif +}; + +struct tilcdc_module { + const char *name; + struct list_head list; + const struct tilcdc_module_ops *funcs; +}; + +void tilcdc_module_init(struct tilcdc_module *mod, const char *name, + const struct tilcdc_module_ops *funcs); +void tilcdc_module_cleanup(struct tilcdc_module *mod); + +/* Panel config that needs to be set in the crtc, but is not coming from + * the mode timings. The display module is expected to call + * tilcdc_crtc_set_panel_info() to set this during modeset. + */ +struct tilcdc_panel_info { + + /* AC Bias Pin Frequency */ + uint32_t ac_bias; + + /* AC Bias Pin Transitions per Interrupt */ + uint32_t ac_bias_intrpt; + + /* DMA burst size */ + uint32_t dma_burst_sz; + + /* Bits per pixel */ + uint32_t bpp; + + /* FIFO DMA Request Delay */ + uint32_t fdd; + + /* TFT Alternative Signal Mapping (Only for active) */ + bool tft_alt_mode; + + /* Invert pixel clock */ + bool invert_pxl_clk; + + /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */ + uint32_t sync_edge; + + /* Horizontal and Vertical Sync: Control: 0=ignore */ + uint32_t sync_ctrl; + + /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */ + uint32_t raster_order; + + /* DMA FIFO threshold */ + uint32_t fifo_th; +}; + +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) + +int tilcdc_crtc_create(struct drm_device *dev); +irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc); +void tilcdc_crtc_update_clk(struct drm_crtc *crtc); +void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc, + const struct tilcdc_panel_info *info); +void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc, + bool simulate_vesa_sync); +void tilcdc_crtc_shutdown(struct drm_crtc *crtc); +int tilcdc_crtc_update_fb(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event); + +int tilcdc_plane_init(struct drm_device *dev, struct drm_plane *plane); + +#endif /* __TILCDC_DRV_H__ */ -- cgit v1.2.3