From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/udl/udl_transfer.c | 217 +++++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 drivers/gpu/drm/udl/udl_transfer.c (limited to 'drivers/gpu/drm/udl/udl_transfer.c') diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c new file mode 100644 index 000000000..5ff1037a3 --- /dev/null +++ b/drivers/gpu/drm/udl/udl_transfer.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Red Hat + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris + * Copyright (C) 2009 Jaya Kumar + * Copyright (C) 2009 Bernie Thompson + */ + +#include + +#include "udl_drv.h" +#include "udl_proto.h" + +#define MAX_CMD_PIXELS 255 + +#define RLX_HEADER_BYTES 7 +#define MIN_RLX_PIX_BYTES 4 +#define MIN_RLX_CMD_BYTES (RLX_HEADER_BYTES + MIN_RLX_PIX_BYTES) + +#define RLE_HEADER_BYTES 6 +#define MIN_RLE_PIX_BYTES 3 +#define MIN_RLE_CMD_BYTES (RLE_HEADER_BYTES + MIN_RLE_PIX_BYTES) + +#define RAW_HEADER_BYTES 6 +#define MIN_RAW_PIX_BYTES 2 +#define MIN_RAW_CMD_BYTES (RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES) + +static inline u16 pixel32_to_be16(const uint32_t pixel) +{ + return (((pixel >> 3) & 0x001f) | + ((pixel >> 5) & 0x07e0) | + ((pixel >> 8) & 0xf800)); +} + +static inline u16 get_pixel_val16(const uint8_t *pixel, int log_bpp) +{ + u16 pixel_val16; + if (log_bpp == 1) + pixel_val16 = *(const uint16_t *)pixel; + else + pixel_val16 = pixel32_to_be16(*(const uint32_t *)pixel); + return pixel_val16; +} + +/* + * Render a command stream for an encoded horizontal line segment of pixels. + * + * A command buffer holds several commands. + * It always begins with a fresh command header + * (the protocol doesn't require this, but we enforce it to allow + * multiple buffers to be potentially encoded and sent in parallel). + * A single command encodes one contiguous horizontal line of pixels + * + * The function relies on the client to do all allocation, so that + * rendering can be done directly to output buffers (e.g. USB URBs). + * The function fills the supplied command buffer, providing information + * on where it left off, so the client may call in again with additional + * buffers if the line will take several buffers to complete. + * + * A single command can transmit a maximum of 256 pixels, + * regardless of the compression ratio (protocol design limit). + * To the hardware, 0 for a size byte means 256 + * + * Rather than 256 pixel commands which are either rl or raw encoded, + * the rlx command simply assumes alternating raw and rl spans within one cmd. + * This has a slightly larger header overhead, but produces more even results. + * It also processes all data (read and write) in a single pass. + * Performance benchmarks of common cases show it having just slightly better + * compression than 256 pixel raw or rle commands, with similar CPU consumpion. + * But for very rl friendly data, will compress not quite as well. + */ +static void udl_compress_hline16( + const u8 **pixel_start_ptr, + const u8 *const pixel_end, + uint32_t *device_address_ptr, + uint8_t **command_buffer_ptr, + const uint8_t *const cmd_buffer_end, int log_bpp) +{ + const int bpp = 1 << log_bpp; + const u8 *pixel = *pixel_start_ptr; + uint32_t dev_addr = *device_address_ptr; + uint8_t *cmd = *command_buffer_ptr; + + while ((pixel_end > pixel) && + (cmd_buffer_end - MIN_RLX_CMD_BYTES > cmd)) { + uint8_t *raw_pixels_count_byte = NULL; + uint8_t *cmd_pixels_count_byte = NULL; + const u8 *raw_pixel_start = NULL; + const u8 *cmd_pixel_start, *cmd_pixel_end = NULL; + uint16_t pixel_val16; + + *cmd++ = UDL_MSG_BULK; + *cmd++ = UDL_CMD_WRITERLX16; + *cmd++ = (uint8_t) ((dev_addr >> 16) & 0xFF); + *cmd++ = (uint8_t) ((dev_addr >> 8) & 0xFF); + *cmd++ = (uint8_t) ((dev_addr) & 0xFF); + + cmd_pixels_count_byte = cmd++; /* we'll know this later */ + cmd_pixel_start = pixel; + + raw_pixels_count_byte = cmd++; /* we'll know this later */ + raw_pixel_start = pixel; + + cmd_pixel_end = pixel + (min3(MAX_CMD_PIXELS + 1UL, + (unsigned long)(pixel_end - pixel) >> log_bpp, + (unsigned long)(cmd_buffer_end - 1 - cmd) / 2) << log_bpp); + + pixel_val16 = get_pixel_val16(pixel, log_bpp); + + while (pixel < cmd_pixel_end) { + const u8 *const start = pixel; + const uint16_t repeating_pixel_val16 = pixel_val16; + + put_unaligned_be16(pixel_val16, cmd); + + cmd += 2; + pixel += bpp; + + while (pixel < cmd_pixel_end) { + pixel_val16 = get_pixel_val16(pixel, log_bpp); + if (pixel_val16 != repeating_pixel_val16) + break; + pixel += bpp; + } + + if (unlikely(pixel > start + bpp)) { + /* go back and fill in raw pixel count */ + *raw_pixels_count_byte = (((start - + raw_pixel_start) >> log_bpp) + 1) & 0xFF; + + /* immediately after raw data is repeat byte */ + *cmd++ = (((pixel - start) >> log_bpp) - 1) & 0xFF; + + /* Then start another raw pixel span */ + raw_pixel_start = pixel; + raw_pixels_count_byte = cmd++; + } + } + + if (pixel > raw_pixel_start) { + /* finalize last RAW span */ + *raw_pixels_count_byte = ((pixel - raw_pixel_start) >> log_bpp) & 0xFF; + } else { + /* undo unused byte */ + cmd--; + } + + *cmd_pixels_count_byte = ((pixel - cmd_pixel_start) >> log_bpp) & 0xFF; + dev_addr += ((pixel - cmd_pixel_start) >> log_bpp) * 2; + } + + if (cmd_buffer_end <= MIN_RLX_CMD_BYTES + cmd) { + /* Fill leftover bytes with no-ops */ + if (cmd_buffer_end > cmd) + memset(cmd, UDL_MSG_BULK, cmd_buffer_end - cmd); + cmd = (uint8_t *) cmd_buffer_end; + } + + *command_buffer_ptr = cmd; + *pixel_start_ptr = pixel; + *device_address_ptr = dev_addr; + + return; +} + +/* + * There are 3 copies of every pixel: The front buffer that the fbdev + * client renders to, the actual framebuffer across the USB bus in hardware + * (that we can only write to, slowly, and can never read), and (optionally) + * our shadow copy that tracks what's been sent to that hardware buffer. + */ +int udl_render_hline(struct drm_device *dev, int log_bpp, struct urb **urb_ptr, + const char *front, char **urb_buf_ptr, + u32 byte_offset, u32 device_byte_offset, + u32 byte_width) +{ + const u8 *line_start, *line_end, *next_pixel; + u32 base16 = 0 + (device_byte_offset >> log_bpp) * 2; + struct urb *urb = *urb_ptr; + u8 *cmd = *urb_buf_ptr; + u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length; + + if (WARN_ON(!(log_bpp == 1 || log_bpp == 2))) { + /* need to finish URB at error from this function */ + udl_urb_completion(urb); + return -EINVAL; + } + + line_start = (u8 *) (front + byte_offset); + next_pixel = line_start; + line_end = next_pixel + byte_width; + + while (next_pixel < line_end) { + + udl_compress_hline16(&next_pixel, + line_end, &base16, + (u8 **) &cmd, (u8 *) cmd_end, log_bpp); + + if (cmd >= cmd_end) { + int len = cmd - (u8 *) urb->transfer_buffer; + int ret = udl_submit_urb(dev, urb, len); + if (ret) + return ret; + urb = udl_get_urb(dev); + if (!urb) + return -EAGAIN; + *urb_ptr = urb; + cmd = urb->transfer_buffer; + cmd_end = &cmd[urb->transfer_buffer_length]; + } + } + + *urb_buf_ptr = cmd; + + return 0; +} -- cgit v1.2.3