From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/v3d/v3d_bo.c | 235 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 drivers/gpu/drm/v3d/v3d_bo.c (limited to 'drivers/gpu/drm/v3d/v3d_bo.c') diff --git a/drivers/gpu/drm/v3d/v3d_bo.c b/drivers/gpu/drm/v3d/v3d_bo.c new file mode 100644 index 000000000..8b3229a37 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_bo.c @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2015-2018 Broadcom */ + +/** + * DOC: V3D GEM BO management support + * + * Compared to VC4 (V3D 2.x), V3D 3.3 introduces an MMU between the + * GPU and the bus, allowing us to use shmem objects for our storage + * instead of CMA. + * + * Physically contiguous objects may still be imported to V3D, but the + * driver doesn't allocate physically contiguous objects on its own. + * Display engines requiring physically contiguous allocations should + * look into Mesa's "renderonly" support (as used by the Mesa pl111 + * driver) for an example of how to integrate with V3D. + * + * Long term, we should support evicting pages from the MMU when under + * memory pressure (thus the v3d_bo_get_pages() refcounting), but + * that's not a high priority since our systems tend to not have swap. + */ + +#include +#include + +#include "v3d_drv.h" +#include "uapi/drm/v3d_drm.h" + +/* Called DRM core on the last userspace/kernel unreference of the + * BO. + */ +void v3d_free_object(struct drm_gem_object *obj) +{ + struct v3d_dev *v3d = to_v3d_dev(obj->dev); + struct v3d_bo *bo = to_v3d_bo(obj); + + v3d_mmu_remove_ptes(bo); + + mutex_lock(&v3d->bo_lock); + v3d->bo_stats.num_allocated--; + v3d->bo_stats.pages_allocated -= obj->size >> PAGE_SHIFT; + mutex_unlock(&v3d->bo_lock); + + spin_lock(&v3d->mm_lock); + drm_mm_remove_node(&bo->node); + spin_unlock(&v3d->mm_lock); + + /* GPU execution may have dirtied any pages in the BO. */ + bo->base.pages_mark_dirty_on_put = true; + + drm_gem_shmem_free(&bo->base); +} + +static const struct drm_gem_object_funcs v3d_gem_funcs = { + .free = v3d_free_object, + .print_info = drm_gem_shmem_object_print_info, + .pin = drm_gem_shmem_object_pin, + .unpin = drm_gem_shmem_object_unpin, + .get_sg_table = drm_gem_shmem_object_get_sg_table, + .vmap = drm_gem_shmem_object_vmap, + .vunmap = drm_gem_shmem_object_vunmap, + .mmap = drm_gem_shmem_object_mmap, + .vm_ops = &drm_gem_shmem_vm_ops, +}; + +/* gem_create_object function for allocating a BO struct and doing + * early setup. + */ +struct drm_gem_object *v3d_create_object(struct drm_device *dev, size_t size) +{ + struct v3d_bo *bo; + struct drm_gem_object *obj; + + if (size == 0) + return ERR_PTR(-EINVAL); + + bo = kzalloc(sizeof(*bo), GFP_KERNEL); + if (!bo) + return ERR_PTR(-ENOMEM); + obj = &bo->base.base; + + obj->funcs = &v3d_gem_funcs; + bo->base.map_wc = true; + INIT_LIST_HEAD(&bo->unref_head); + + return &bo->base.base; +} + +static int +v3d_bo_create_finish(struct drm_gem_object *obj) +{ + struct v3d_dev *v3d = to_v3d_dev(obj->dev); + struct v3d_bo *bo = to_v3d_bo(obj); + struct sg_table *sgt; + int ret; + + /* So far we pin the BO in the MMU for its lifetime, so use + * shmem's helper for getting a lifetime sgt. + */ + sgt = drm_gem_shmem_get_pages_sgt(&bo->base); + if (IS_ERR(sgt)) + return PTR_ERR(sgt); + + spin_lock(&v3d->mm_lock); + /* Allocate the object's space in the GPU's page tables. + * Inserting PTEs will happen later, but the offset is for the + * lifetime of the BO. + */ + ret = drm_mm_insert_node_generic(&v3d->mm, &bo->node, + obj->size >> PAGE_SHIFT, + GMP_GRANULARITY >> PAGE_SHIFT, 0, 0); + spin_unlock(&v3d->mm_lock); + if (ret) + return ret; + + /* Track stats for /debug/dri/n/bo_stats. */ + mutex_lock(&v3d->bo_lock); + v3d->bo_stats.num_allocated++; + v3d->bo_stats.pages_allocated += obj->size >> PAGE_SHIFT; + mutex_unlock(&v3d->bo_lock); + + v3d_mmu_insert_ptes(bo); + + return 0; +} + +struct v3d_bo *v3d_bo_create(struct drm_device *dev, struct drm_file *file_priv, + size_t unaligned_size) +{ + struct drm_gem_shmem_object *shmem_obj; + struct v3d_bo *bo; + int ret; + + shmem_obj = drm_gem_shmem_create(dev, unaligned_size); + if (IS_ERR(shmem_obj)) + return ERR_CAST(shmem_obj); + bo = to_v3d_bo(&shmem_obj->base); + + ret = v3d_bo_create_finish(&shmem_obj->base); + if (ret) + goto free_obj; + + return bo; + +free_obj: + drm_gem_shmem_free(shmem_obj); + return ERR_PTR(ret); +} + +struct drm_gem_object * +v3d_prime_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, + struct sg_table *sgt) +{ + struct drm_gem_object *obj; + int ret; + + obj = drm_gem_shmem_prime_import_sg_table(dev, attach, sgt); + if (IS_ERR(obj)) + return obj; + + ret = v3d_bo_create_finish(obj); + if (ret) { + drm_gem_shmem_free(&to_v3d_bo(obj)->base); + return ERR_PTR(ret); + } + + return obj; +} + +int v3d_create_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_v3d_create_bo *args = data; + struct v3d_bo *bo = NULL; + int ret; + + if (args->flags != 0) { + DRM_INFO("unknown create_bo flags: %d\n", args->flags); + return -EINVAL; + } + + bo = v3d_bo_create(dev, file_priv, PAGE_ALIGN(args->size)); + if (IS_ERR(bo)) + return PTR_ERR(bo); + + args->offset = bo->node.start << PAGE_SHIFT; + + ret = drm_gem_handle_create(file_priv, &bo->base.base, &args->handle); + drm_gem_object_put(&bo->base.base); + + return ret; +} + +int v3d_mmap_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_v3d_mmap_bo *args = data; + struct drm_gem_object *gem_obj; + + if (args->flags != 0) { + DRM_INFO("unknown mmap_bo flags: %d\n", args->flags); + return -EINVAL; + } + + gem_obj = drm_gem_object_lookup(file_priv, args->handle); + if (!gem_obj) { + DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle); + return -ENOENT; + } + + args->offset = drm_vma_node_offset_addr(&gem_obj->vma_node); + drm_gem_object_put(gem_obj); + + return 0; +} + +int v3d_get_bo_offset_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_v3d_get_bo_offset *args = data; + struct drm_gem_object *gem_obj; + struct v3d_bo *bo; + + gem_obj = drm_gem_object_lookup(file_priv, args->handle); + if (!gem_obj) { + DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle); + return -ENOENT; + } + bo = to_v3d_bo(gem_obj); + + args->offset = bo->node.start << PAGE_SHIFT; + + drm_gem_object_put(gem_obj); + return 0; +} -- cgit v1.2.3