From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hid/hid-dr.c | 319 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 319 insertions(+) create mode 100644 drivers/hid/hid-dr.c (limited to 'drivers/hid/hid-dr.c') diff --git a/drivers/hid/hid-dr.c b/drivers/hid/hid-dr.c new file mode 100644 index 000000000..947f19f86 --- /dev/null +++ b/drivers/hid/hid-dr.c @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Force feedback support for DragonRise Inc. game controllers + * + * From what I have gathered, these devices are mass produced in China and are + * distributed under several vendors. They often share the same design as + * the original PlayStation DualShock controller. + * + * 0079:0006 "DragonRise Inc. Generic USB Joystick " + * - tested with a Tesun USB-703 game controller. + * + * Copyright (c) 2009 Richard Walmsley + */ + +/* + */ + +#include +#include +#include +#include + +#include "hid-ids.h" + +#ifdef CONFIG_DRAGONRISE_FF + +struct drff_device { + struct hid_report *report; +}; + +static int drff_play(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct hid_device *hid = input_get_drvdata(dev); + struct drff_device *drff = data; + int strong, weak; + + strong = effect->u.rumble.strong_magnitude; + weak = effect->u.rumble.weak_magnitude; + + dbg_hid("called with 0x%04x 0x%04x", strong, weak); + + if (strong || weak) { + strong = strong * 0xff / 0xffff; + weak = weak * 0xff / 0xffff; + + /* While reverse engineering this device, I found that when + this value is set, it causes the strong rumble to function + at a near maximum speed, so we'll bypass it. */ + if (weak == 0x0a) + weak = 0x0b; + + drff->report->field[0]->value[0] = 0x51; + drff->report->field[0]->value[1] = 0x00; + drff->report->field[0]->value[2] = weak; + drff->report->field[0]->value[4] = strong; + hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT); + + drff->report->field[0]->value[0] = 0xfa; + drff->report->field[0]->value[1] = 0xfe; + } else { + drff->report->field[0]->value[0] = 0xf3; + drff->report->field[0]->value[1] = 0x00; + } + + drff->report->field[0]->value[2] = 0x00; + drff->report->field[0]->value[4] = 0x00; + dbg_hid("running with 0x%02x 0x%02x", strong, weak); + hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT); + + return 0; +} + +static int drff_init(struct hid_device *hid) +{ + struct drff_device *drff; + struct hid_report *report; + struct hid_input *hidinput; + struct list_head *report_list = + &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct input_dev *dev; + int error; + + if (list_empty(&hid->inputs)) { + hid_err(hid, "no inputs found\n"); + return -ENODEV; + } + hidinput = list_first_entry(&hid->inputs, struct hid_input, list); + dev = hidinput->input; + + if (list_empty(report_list)) { + hid_err(hid, "no output reports found\n"); + return -ENODEV; + } + + report = list_first_entry(report_list, struct hid_report, list); + if (report->maxfield < 1) { + hid_err(hid, "no fields in the report\n"); + return -ENODEV; + } + + if (report->field[0]->report_count < 7) { + hid_err(hid, "not enough values in the field\n"); + return -ENODEV; + } + + drff = kzalloc(sizeof(struct drff_device), GFP_KERNEL); + if (!drff) + return -ENOMEM; + + set_bit(FF_RUMBLE, dev->ffbit); + + error = input_ff_create_memless(dev, drff, drff_play); + if (error) { + kfree(drff); + return error; + } + + drff->report = report; + drff->report->field[0]->value[0] = 0xf3; + drff->report->field[0]->value[1] = 0x00; + drff->report->field[0]->value[2] = 0x00; + drff->report->field[0]->value[3] = 0x00; + drff->report->field[0]->value[4] = 0x00; + drff->report->field[0]->value[5] = 0x00; + drff->report->field[0]->value[6] = 0x00; + hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT); + + hid_info(hid, "Force Feedback for DragonRise Inc. " + "game controllers by Richard Walmsley \n"); + + return 0; +} +#else +static inline int drff_init(struct hid_device *hid) +{ + return 0; +} +#endif + +/* + * The original descriptor of joystick with PID 0x0011, represented by DVTech PC + * JS19. It seems both copied from another device and a result of confusion + * either about the specification or about the program used to create the + * descriptor. In any case, it's a wonder it works on Windows. + * + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Joystick), ; Joystick (04h, application collection) + * Collection (Application), + * Collection (Logical), + * Report Size (8), + * Report Count (5), + * Logical Minimum (0), + * Logical Maximum (255), + * Physical Minimum (0), + * Physical Maximum (255), + * Usage (X), ; X (30h, dynamic value) + * Usage (X), ; X (30h, dynamic value) + * Usage (X), ; X (30h, dynamic value) + * Usage (X), ; X (30h, dynamic value) + * Usage (Y), ; Y (31h, dynamic value) + * Input (Variable), + * Report Size (4), + * Report Count (1), + * Logical Maximum (7), + * Physical Maximum (315), + * Unit (Degrees), + * Usage (00h), + * Input (Variable, Null State), + * Unit, + * Report Size (1), + * Report Count (10), + * Logical Maximum (1), + * Physical Maximum (1), + * Usage Page (Button), ; Button (09h) + * Usage Minimum (01h), + * Usage Maximum (0Ah), + * Input (Variable), + * Usage Page (FF00h), ; FF00h, vendor-defined + * Report Size (1), + * Report Count (10), + * Logical Maximum (1), + * Physical Maximum (1), + * Usage (01h), + * Input (Variable), + * End Collection, + * Collection (Logical), + * Report Size (8), + * Report Count (4), + * Physical Maximum (255), + * Logical Maximum (255), + * Usage (02h), + * Output (Variable), + * End Collection, + * End Collection + */ + +/* Size of the original descriptor of the PID 0x0011 joystick */ +#define PID0011_RDESC_ORIG_SIZE 101 + +/* Fixed report descriptor for PID 0x011 joystick */ +static __u8 pid0011_rdesc_fixed[] = { + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x04, /* Usage (Joystick), */ + 0xA1, 0x01, /* Collection (Application), */ + 0xA1, 0x02, /* Collection (Logical), */ + 0x14, /* Logical Minimum (0), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x01, /* Input (Constant), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x95, 0x02, /* Report Count (2), */ + 0x09, 0x30, /* Usage (X), */ + 0x09, 0x31, /* Usage (Y), */ + 0x81, 0x02, /* Input (Variable), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x04, /* Report Count (4), */ + 0x81, 0x01, /* Input (Constant), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x0A, /* Report Count (10), */ + 0x05, 0x09, /* Usage Page (Button), */ + 0x19, 0x01, /* Usage Minimum (01h), */ + 0x29, 0x0A, /* Usage Maximum (0Ah), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x0A, /* Report Count (10), */ + 0x81, 0x01, /* Input (Constant), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) +{ + switch (hdev->product) { + case 0x0011: + if (*rsize == PID0011_RDESC_ORIG_SIZE) { + rdesc = pid0011_rdesc_fixed; + *rsize = sizeof(pid0011_rdesc_fixed); + } + break; + } + return rdesc; +} + +#define map_abs(c) hid_map_usage(hi, usage, bit, max, EV_ABS, (c)) +#define map_rel(c) hid_map_usage(hi, usage, bit, max, EV_REL, (c)) + +static int dr_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid) { + /* + * revert to the old hid-input behavior where axes + * can be randomly assigned when hid->usage is reused. + */ + case HID_GD_X: case HID_GD_Y: case HID_GD_Z: + case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ: + if (field->flags & HID_MAIN_ITEM_RELATIVE) + map_rel(usage->hid & 0xf); + else + map_abs(usage->hid & 0xf); + return 1; + } + + return 0; +} + +static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + + dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe..."); + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "parse failed\n"); + goto err; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); + if (ret) { + hid_err(hdev, "hw start failed\n"); + goto err; + } + + switch (hdev->product) { + case 0x0006: + ret = drff_init(hdev); + if (ret) { + dev_err(&hdev->dev, "force feedback init failed\n"); + hid_hw_stop(hdev); + goto err; + } + break; + } + + return 0; +err: + return ret; +} + +static const struct hid_device_id dr_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006), }, + { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011), }, + { } +}; +MODULE_DEVICE_TABLE(hid, dr_devices); + +static struct hid_driver dr_driver = { + .name = "dragonrise", + .id_table = dr_devices, + .report_fixup = dr_report_fixup, + .probe = dr_probe, + .input_mapping = dr_input_mapping, +}; +module_hid_driver(dr_driver); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3