From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hid/i2c-hid/i2c-hid-of.c | 150 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) create mode 100644 drivers/hid/i2c-hid/i2c-hid-of.c (limited to 'drivers/hid/i2c-hid/i2c-hid-of.c') diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c new file mode 100644 index 000000000..101765681 --- /dev/null +++ b/drivers/hid/i2c-hid/i2c-hid-of.c @@ -0,0 +1,150 @@ +/* + * HID over I2C Open Firmware Subclass + * + * Copyright (c) 2012 Benjamin Tissoires + * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France + * Copyright (c) 2012 Red Hat, Inc + * + * This code was forked out of the core code, which was partly based on + * "USB HID support for Linux": + * + * Copyright (c) 1999 Andreas Gal + * Copyright (c) 2000-2005 Vojtech Pavlik + * Copyright (c) 2005 Michael Haboustak for Concept2, Inc + * Copyright (c) 2007-2008 Oliver Neukum + * Copyright (c) 2006-2010 Jiri Kosina + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "i2c-hid.h" + +struct i2c_hid_of { + struct i2chid_ops ops; + + struct i2c_client *client; + struct regulator_bulk_data supplies[2]; + int post_power_delay_ms; +}; + +static int i2c_hid_of_power_up(struct i2chid_ops *ops) +{ + struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops); + struct device *dev = &ihid_of->client->dev; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ihid_of->supplies), + ihid_of->supplies); + if (ret) { + dev_warn(dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + if (ihid_of->post_power_delay_ms) + msleep(ihid_of->post_power_delay_ms); + + return 0; +} + +static void i2c_hid_of_power_down(struct i2chid_ops *ops) +{ + struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops); + + regulator_bulk_disable(ARRAY_SIZE(ihid_of->supplies), + ihid_of->supplies); +} + +static int i2c_hid_of_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct i2c_hid_of *ihid_of; + u16 hid_descriptor_address; + u32 quirks = 0; + int ret; + u32 val; + + ihid_of = devm_kzalloc(&client->dev, sizeof(*ihid_of), GFP_KERNEL); + if (!ihid_of) + return -ENOMEM; + + ihid_of->ops.power_up = i2c_hid_of_power_up; + ihid_of->ops.power_down = i2c_hid_of_power_down; + + ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val); + if (ret) { + dev_err(&client->dev, "HID register address not provided\n"); + return -ENODEV; + } + if (val >> 16) { + dev_err(&client->dev, "Bad HID register address: 0x%08x\n", + val); + return -EINVAL; + } + hid_descriptor_address = val; + + if (!device_property_read_u32(&client->dev, "post-power-on-delay-ms", + &val)) + ihid_of->post_power_delay_ms = val; + + ihid_of->supplies[0].supply = "vdd"; + ihid_of->supplies[1].supply = "vddl"; + ret = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(ihid_of->supplies), + ihid_of->supplies); + if (ret) + return ret; + + if (device_property_read_bool(dev, "touchscreen-inverted-x")) + quirks |= HID_QUIRK_X_INVERT; + + if (device_property_read_bool(dev, "touchscreen-inverted-y")) + quirks |= HID_QUIRK_Y_INVERT; + + return i2c_hid_core_probe(client, &ihid_of->ops, + hid_descriptor_address, quirks); +} + +static const struct of_device_id i2c_hid_of_match[] = { + { .compatible = "hid-over-i2c" }, + {}, +}; +MODULE_DEVICE_TABLE(of, i2c_hid_of_match); + +static const struct i2c_device_id i2c_hid_of_id_table[] = { + { "hid", 0 }, + { "hid-over-i2c", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, i2c_hid_of_id_table); + +static struct i2c_driver i2c_hid_of_driver = { + .driver = { + .name = "i2c_hid_of", + .pm = &i2c_hid_core_pm, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .of_match_table = of_match_ptr(i2c_hid_of_match), + }, + + .probe_new = i2c_hid_of_probe, + .remove = i2c_hid_core_remove, + .shutdown = i2c_hid_core_shutdown, + .id_table = i2c_hid_of_id_table, +}; + +module_i2c_driver(i2c_hid_of_driver); + +MODULE_DESCRIPTION("HID over I2C OF driver"); +MODULE_AUTHOR("Benjamin Tissoires "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3