From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/emc2305.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 626 insertions(+) create mode 100644 drivers/hwmon/emc2305.c (limited to 'drivers/hwmon/emc2305.c') diff --git a/drivers/hwmon/emc2305.c b/drivers/hwmon/emc2305.c new file mode 100644 index 000000000..6ad055e58 --- /dev/null +++ b/drivers/hwmon/emc2305.c @@ -0,0 +1,626 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Hardware monitoring driver for EMC2305 fan controller + * + * Copyright (C) 2022 Nvidia Technologies Ltd. + */ + +#include +#include +#include +#include +#include +#include + +static const unsigned short +emc2305_normal_i2c[] = { 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d, I2C_CLIENT_END }; + +#define EMC2305_REG_DRIVE_FAIL_STATUS 0x27 +#define EMC2305_REG_VENDOR 0xfe +#define EMC2305_FAN_MAX 0xff +#define EMC2305_FAN_MIN 0x00 +#define EMC2305_FAN_MAX_STATE 10 +#define EMC2305_DEVICE 0x34 +#define EMC2305_VENDOR 0x5d +#define EMC2305_REG_PRODUCT_ID 0xfd +#define EMC2305_TACH_REGS_UNUSE_BITS 3 +#define EMC2305_TACH_CNT_MULTIPLIER 0x02 +#define EMC2305_TACH_RANGE_MIN 480 + +#define EMC2305_PWM_DUTY2STATE(duty, max_state, pwm_max) \ + DIV_ROUND_CLOSEST((duty) * (max_state), (pwm_max)) +#define EMC2305_PWM_STATE2DUTY(state, max_state, pwm_max) \ + DIV_ROUND_CLOSEST((state) * (pwm_max), (max_state)) + +/* + * Factor by equations [2] and [3] from data sheet; valid for fans where the number of edges + * equal (poles * 2 + 1). + */ +#define EMC2305_RPM_FACTOR 3932160 + +#define EMC2305_REG_FAN_DRIVE(n) (0x30 + 0x10 * (n)) +#define EMC2305_REG_FAN_MIN_DRIVE(n) (0x38 + 0x10 * (n)) +#define EMC2305_REG_FAN_TACH(n) (0x3e + 0x10 * (n)) + +enum emc230x_product_id { + EMC2305 = 0x34, + EMC2303 = 0x35, + EMC2302 = 0x36, + EMC2301 = 0x37, +}; + +static const struct i2c_device_id emc2305_ids[] = { + { "emc2305", 0 }, + { "emc2303", 0 }, + { "emc2302", 0 }, + { "emc2301", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, emc2305_ids); + +/** + * @cdev: cooling device; + * @curr_state: cooling current state; + * @last_hwmon_state: last cooling state updated by hwmon subsystem; + * @last_thermal_state: last cooling state updated by thermal subsystem; + * + * The 'last_hwmon_state' and 'last_thermal_state' fields are provided to support fan low limit + * speed feature. The purpose of this feature is to provides ability to limit fan speed + * according to some system wise considerations, like absence of some replaceable units (PSU or + * line cards), high system ambient temperature, unreliable transceivers temperature sensing or + * some other factors which indirectly impacts system's airflow + * Fan low limit feature is supported through 'hwmon' interface: 'hwmon' 'pwm' attribute is + * used for setting low limit for fan speed in case 'thermal' subsystem is configured in + * kernel. In this case setting fan speed through 'hwmon' will never let the 'thermal' + * subsystem to select a lower duty cycle than the duty cycle selected with the 'pwm' + * attribute. + * From other side, fan speed is to be updated in hardware through 'pwm' only in case the + * requested fan speed is above last speed set by 'thermal' subsystem, otherwise requested fan + * speed will be just stored with no PWM update. + */ +struct emc2305_cdev_data { + struct thermal_cooling_device *cdev; + unsigned int cur_state; + unsigned long last_hwmon_state; + unsigned long last_thermal_state; +}; + +/** + * @client: i2c client; + * @hwmon_dev: hwmon device; + * @max_state: maximum cooling state of the cooling device; + * @pwm_num: number of PWM channels; + * @pwm_separate: separate PWM settings for every channel; + * @pwm_min: array of minimum PWM per channel; + * @cdev_data: array of cooling devices data; + */ +struct emc2305_data { + struct i2c_client *client; + struct device *hwmon_dev; + u8 max_state; + u8 pwm_num; + bool pwm_separate; + u8 pwm_min[EMC2305_PWM_MAX]; + struct emc2305_cdev_data cdev_data[EMC2305_PWM_MAX]; +}; + +static char *emc2305_fan_name[] = { + "emc2305_fan", + "emc2305_fan1", + "emc2305_fan2", + "emc2305_fan3", + "emc2305_fan4", + "emc2305_fan5", +}; + +static void emc2305_unset_tz(struct device *dev); + +static int emc2305_get_max_channel(const struct emc2305_data *data) +{ + return data->pwm_num; +} + +static int emc2305_get_cdev_idx(struct thermal_cooling_device *cdev) +{ + struct emc2305_data *data = cdev->devdata; + size_t len = strlen(cdev->type); + int ret; + + if (len <= 0) + return -EINVAL; + + /* + * Returns index of cooling device 0..4 in case of separate PWM setting. + * Zero index is used in case of one common PWM setting. + * If the mode is not set as pwm_separate, all PWMs are to be bound + * to the common thermal zone and should work at the same speed + * to perform cooling for the same thermal junction. + * Otherwise, return specific channel that will be used in bound + * related PWM to the thermal zone. + */ + if (!data->pwm_separate) + return 0; + + ret = cdev->type[len - 1]; + switch (ret) { + case '1' ... '5': + return ret - '1'; + default: + break; + } + return -EINVAL; +} + +static int emc2305_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state) +{ + int cdev_idx; + struct emc2305_data *data = cdev->devdata; + + cdev_idx = emc2305_get_cdev_idx(cdev); + if (cdev_idx < 0) + return cdev_idx; + + *state = data->cdev_data[cdev_idx].cur_state; + return 0; +} + +static int emc2305_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) +{ + struct emc2305_data *data = cdev->devdata; + *state = data->max_state; + return 0; +} + +static int __emc2305_set_cur_state(struct emc2305_data *data, int cdev_idx, unsigned long state) +{ + int ret; + struct i2c_client *client = data->client; + u8 val, i; + + state = max_t(unsigned long, state, data->cdev_data[cdev_idx].last_hwmon_state); + + val = EMC2305_PWM_STATE2DUTY(state, data->max_state, EMC2305_FAN_MAX); + + data->cdev_data[cdev_idx].cur_state = state; + if (data->pwm_separate) { + ret = i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_DRIVE(cdev_idx), val); + if (ret < 0) + return ret; + } else { + /* + * Set the same PWM value in all channels + * if common PWM channel is used. + */ + for (i = 0; i < data->pwm_num; i++) { + ret = i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_DRIVE(i), val); + if (ret < 0) + return ret; + } + } + + return 0; +} + +static int emc2305_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) +{ + int cdev_idx, ret; + struct emc2305_data *data = cdev->devdata; + + if (state > data->max_state) + return -EINVAL; + + cdev_idx = emc2305_get_cdev_idx(cdev); + if (cdev_idx < 0) + return cdev_idx; + + /* Save thermal state. */ + data->cdev_data[cdev_idx].last_thermal_state = state; + ret = __emc2305_set_cur_state(data, cdev_idx, state); + if (ret < 0) + return ret; + + return 0; +} + +static const struct thermal_cooling_device_ops emc2305_cooling_ops = { + .get_max_state = emc2305_get_max_state, + .get_cur_state = emc2305_get_cur_state, + .set_cur_state = emc2305_set_cur_state, +}; + +static int emc2305_show_fault(struct device *dev, int channel) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int status_reg; + + status_reg = i2c_smbus_read_byte_data(client, EMC2305_REG_DRIVE_FAIL_STATUS); + if (status_reg < 0) + return status_reg; + + return status_reg & (1 << channel) ? 1 : 0; +} + +static int emc2305_show_fan(struct device *dev, int channel) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int ret; + + ret = i2c_smbus_read_word_swapped(client, EMC2305_REG_FAN_TACH(channel)); + if (ret <= 0) + return ret; + + ret = ret >> EMC2305_TACH_REGS_UNUSE_BITS; + ret = EMC2305_RPM_FACTOR / ret; + if (ret <= EMC2305_TACH_RANGE_MIN) + return 0; + + return ret * EMC2305_TACH_CNT_MULTIPLIER; +} + +static int emc2305_show_pwm(struct device *dev, int channel) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + + return i2c_smbus_read_byte_data(client, EMC2305_REG_FAN_DRIVE(channel)); +} + +static int emc2305_set_pwm(struct device *dev, long val, int channel) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int ret; + + if (val < data->pwm_min[channel] || val > EMC2305_FAN_MAX) + return -EINVAL; + + ret = i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_DRIVE(channel), val); + if (ret < 0) + return ret; + data->cdev_data[channel].cur_state = EMC2305_PWM_DUTY2STATE(val, data->max_state, + EMC2305_FAN_MAX); + return 0; +} + +static int emc2305_set_single_tz(struct device *dev, int idx) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + long pwm; + int i, cdev_idx, ret; + + cdev_idx = (idx) ? idx - 1 : 0; + pwm = data->pwm_min[cdev_idx]; + + data->cdev_data[cdev_idx].cdev = + thermal_cooling_device_register(emc2305_fan_name[idx], data, + &emc2305_cooling_ops); + + if (IS_ERR(data->cdev_data[cdev_idx].cdev)) { + dev_err(dev, "Failed to register cooling device %s\n", emc2305_fan_name[idx]); + return PTR_ERR(data->cdev_data[cdev_idx].cdev); + } + /* Set minimal PWM speed. */ + if (data->pwm_separate) { + ret = emc2305_set_pwm(dev, pwm, cdev_idx); + if (ret < 0) + return ret; + } else { + for (i = 0; i < data->pwm_num; i++) { + ret = emc2305_set_pwm(dev, pwm, i); + if (ret < 0) + return ret; + } + } + data->cdev_data[cdev_idx].cur_state = + EMC2305_PWM_DUTY2STATE(data->pwm_min[cdev_idx], data->max_state, + EMC2305_FAN_MAX); + data->cdev_data[cdev_idx].last_hwmon_state = + EMC2305_PWM_DUTY2STATE(data->pwm_min[cdev_idx], data->max_state, + EMC2305_FAN_MAX); + return 0; +} + +static int emc2305_set_tz(struct device *dev) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + int i, ret; + + if (!data->pwm_separate) + return emc2305_set_single_tz(dev, 0); + + for (i = 0; i < data->pwm_num; i++) { + ret = emc2305_set_single_tz(dev, i + 1); + if (ret) + goto thermal_cooling_device_register_fail; + } + return 0; + +thermal_cooling_device_register_fail: + emc2305_unset_tz(dev); + return ret; +} + +static void emc2305_unset_tz(struct device *dev) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + int i; + + /* Unregister cooling device. */ + for (i = 0; i < EMC2305_PWM_MAX; i++) + if (data->cdev_data[i].cdev) + thermal_cooling_device_unregister(data->cdev_data[i].cdev); +} + +static umode_t +emc2305_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) +{ + int max_channel = emc2305_get_max_channel(data); + + /* Don't show channels which are not physically connected. */ + if (channel >= max_channel) + return 0; + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_fault: + return 0444; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return 0644; + default: + break; + } + break; + default: + break; + } + + return 0; +}; + +static int +emc2305_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) +{ + struct emc2305_data *data = dev_get_drvdata(dev); + int cdev_idx; + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + /* If thermal is configured - handle PWM limit setting. */ + if (IS_REACHABLE(CONFIG_THERMAL)) { + if (data->pwm_separate) + cdev_idx = channel; + else + cdev_idx = 0; + data->cdev_data[cdev_idx].last_hwmon_state = + EMC2305_PWM_DUTY2STATE(val, data->max_state, + EMC2305_FAN_MAX); + /* + * Update PWM only in case requested state is not less than the + * last thermal state. + */ + if (data->cdev_data[cdev_idx].last_hwmon_state >= + data->cdev_data[cdev_idx].last_thermal_state) + return __emc2305_set_cur_state(data, cdev_idx, + data->cdev_data[cdev_idx].last_hwmon_state); + return 0; + } + return emc2305_set_pwm(dev, val, channel); + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +}; + +static int +emc2305_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) +{ + int ret; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + ret = emc2305_show_fan(dev, channel); + if (ret < 0) + return ret; + *val = ret; + return 0; + case hwmon_fan_fault: + ret = emc2305_show_fault(dev, channel); + if (ret < 0) + return ret; + *val = ret; + return 0; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + ret = emc2305_show_pwm(dev, channel); + if (ret < 0) + return ret; + *val = ret; + return 0; + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +}; + +static const struct hwmon_ops emc2305_ops = { + .is_visible = emc2305_is_visible, + .read = emc2305_read, + .write = emc2305_write, +}; + +static const struct hwmon_channel_info *emc2305_info[] = { + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT), + NULL +}; + +static const struct hwmon_chip_info emc2305_chip_info = { + .ops = &emc2305_ops, + .info = emc2305_info, +}; + +static int emc2305_identify(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct emc2305_data *data = i2c_get_clientdata(client); + int ret; + + ret = i2c_smbus_read_byte_data(client, EMC2305_REG_PRODUCT_ID); + if (ret < 0) + return ret; + + switch (ret) { + case EMC2305: + data->pwm_num = 5; + break; + case EMC2303: + data->pwm_num = 3; + break; + case EMC2302: + data->pwm_num = 2; + break; + case EMC2301: + data->pwm_num = 1; + break; + default: + return -ENODEV; + } + + return 0; +} + +static int emc2305_probe(struct i2c_client *client) +{ + struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; + struct emc2305_data *data; + struct emc2305_platform_data *pdata; + int vendor; + int ret; + int i; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + vendor = i2c_smbus_read_byte_data(client, EMC2305_REG_VENDOR); + if (vendor != EMC2305_VENDOR) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + data->client = client; + + ret = emc2305_identify(dev); + if (ret) + return ret; + + pdata = dev_get_platdata(&client->dev); + if (pdata) { + if (!pdata->max_state || pdata->max_state > EMC2305_FAN_MAX_STATE) + return -EINVAL; + data->max_state = pdata->max_state; + /* + * Validate a number of active PWM channels. Note that + * configured number can be less than the actual maximum + * supported by the device. + */ + if (!pdata->pwm_num || pdata->pwm_num > EMC2305_PWM_MAX) + return -EINVAL; + data->pwm_num = pdata->pwm_num; + data->pwm_separate = pdata->pwm_separate; + for (i = 0; i < EMC2305_PWM_MAX; i++) + data->pwm_min[i] = pdata->pwm_min[i]; + } else { + data->max_state = EMC2305_FAN_MAX_STATE; + data->pwm_separate = false; + for (i = 0; i < EMC2305_PWM_MAX; i++) + data->pwm_min[i] = EMC2305_FAN_MIN; + } + + data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "emc2305", data, + &emc2305_chip_info, NULL); + if (IS_ERR(data->hwmon_dev)) + return PTR_ERR(data->hwmon_dev); + + if (IS_REACHABLE(CONFIG_THERMAL)) { + ret = emc2305_set_tz(dev); + if (ret != 0) + return ret; + } + + for (i = 0; i < data->pwm_num; i++) { + ret = i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_MIN_DRIVE(i), + data->pwm_min[i]); + if (ret < 0) + return ret; + } + + return 0; +} + +static void emc2305_remove(struct i2c_client *client) +{ + struct device *dev = &client->dev; + + if (IS_REACHABLE(CONFIG_THERMAL)) + emc2305_unset_tz(dev); +} + +static struct i2c_driver emc2305_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "emc2305", + }, + .probe_new = emc2305_probe, + .remove = emc2305_remove, + .id_table = emc2305_ids, + .address_list = emc2305_normal_i2c, +}; + +module_i2c_driver(emc2305_driver); + +MODULE_AUTHOR("Nvidia"); +MODULE_DESCRIPTION("Microchip EMC2305 fan controller driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3