From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/i5k_amb.c | 608 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 608 insertions(+) create mode 100644 drivers/hwmon/i5k_amb.c (limited to 'drivers/hwmon/i5k_amb.c') diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c new file mode 100644 index 000000000..783fa936e --- /dev/null +++ b/drivers/hwmon/i5k_amb.c @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * A hwmon driver for the Intel 5000 series chipset FB-DIMM AMB + * temperature sensors + * Copyright (C) 2007 IBM + * + * Author: Darrick J. Wong + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "i5k_amb" + +#define I5K_REG_AMB_BASE_ADDR 0x48 +#define I5K_REG_AMB_LEN_ADDR 0x50 +#define I5K_REG_CHAN0_PRESENCE_ADDR 0x64 +#define I5K_REG_CHAN1_PRESENCE_ADDR 0x66 + +#define AMB_REG_TEMP_MIN_ADDR 0x80 +#define AMB_REG_TEMP_MID_ADDR 0x81 +#define AMB_REG_TEMP_MAX_ADDR 0x82 +#define AMB_REG_TEMP_STATUS_ADDR 0x84 +#define AMB_REG_TEMP_ADDR 0x85 + +#define AMB_CONFIG_SIZE 2048 +#define AMB_FUNC_3_OFFSET 768 + +static unsigned long amb_reg_temp_status(unsigned int amb) +{ + return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_STATUS_ADDR + + AMB_CONFIG_SIZE * amb; +} + +static unsigned long amb_reg_temp_min(unsigned int amb) +{ + return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MIN_ADDR + + AMB_CONFIG_SIZE * amb; +} + +static unsigned long amb_reg_temp_mid(unsigned int amb) +{ + return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MID_ADDR + + AMB_CONFIG_SIZE * amb; +} + +static unsigned long amb_reg_temp_max(unsigned int amb) +{ + return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MAX_ADDR + + AMB_CONFIG_SIZE * amb; +} + +static unsigned long amb_reg_temp(unsigned int amb) +{ + return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_ADDR + + AMB_CONFIG_SIZE * amb; +} + +#define MAX_MEM_CHANNELS 4 +#define MAX_AMBS_PER_CHANNEL 16 +#define MAX_AMBS (MAX_MEM_CHANNELS * \ + MAX_AMBS_PER_CHANNEL) +#define CHANNEL_SHIFT 4 +#define DIMM_MASK 0xF +/* + * Ugly hack: For some reason the highest bit is set if there + * are _any_ DIMMs in the channel. Attempting to read from + * this "high-order" AMB results in a memory bus error, so + * for now we'll just ignore that top bit, even though that + * might prevent us from seeing the 16th DIMM in the channel. + */ +#define REAL_MAX_AMBS_PER_CHANNEL 15 +#define KNOBS_PER_AMB 6 + +static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit) +{ + return byte_num * MAX_AMBS_PER_CHANNEL + bit; +} + +#define AMB_SYSFS_NAME_LEN 16 +struct i5k_device_attribute { + struct sensor_device_attribute s_attr; + char name[AMB_SYSFS_NAME_LEN]; +}; + +struct i5k_amb_data { + struct device *hwmon_dev; + + unsigned long amb_base; + unsigned long amb_len; + u16 amb_present[MAX_MEM_CHANNELS]; + void __iomem *amb_mmio; + struct i5k_device_attribute *attrs; + unsigned int num_attrs; +}; + +static ssize_t name_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + return sprintf(buf, "%s\n", DRVNAME); +} + + +static DEVICE_ATTR_RO(name); + +static struct platform_device *amb_pdev; + +static u8 amb_read_byte(struct i5k_amb_data *data, unsigned long offset) +{ + return ioread8(data->amb_mmio + offset); +} + +static void amb_write_byte(struct i5k_amb_data *data, unsigned long offset, + u8 val) +{ + iowrite8(val, data->amb_mmio + offset); +} + +static ssize_t show_amb_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + + if (!(amb_read_byte(data, amb_reg_temp_status(attr->index)) & 0x20) && + (amb_read_byte(data, amb_reg_temp_status(attr->index)) & 0x8)) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static ssize_t store_amb_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + unsigned long temp; + int ret = kstrtoul(buf, 10, &temp); + if (ret < 0) + return ret; + + temp = temp / 500; + if (temp > 255) + temp = 255; + + amb_write_byte(data, amb_reg_temp_min(attr->index), temp); + return count; +} + +static ssize_t store_amb_mid(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + unsigned long temp; + int ret = kstrtoul(buf, 10, &temp); + if (ret < 0) + return ret; + + temp = temp / 500; + if (temp > 255) + temp = 255; + + amb_write_byte(data, amb_reg_temp_mid(attr->index), temp); + return count; +} + +static ssize_t store_amb_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + unsigned long temp; + int ret = kstrtoul(buf, 10, &temp); + if (ret < 0) + return ret; + + temp = temp / 500; + if (temp > 255) + temp = 255; + + amb_write_byte(data, amb_reg_temp_max(attr->index), temp); + return count; +} + +static ssize_t show_amb_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", + 500 * amb_read_byte(data, amb_reg_temp_min(attr->index))); +} + +static ssize_t show_amb_mid(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", + 500 * amb_read_byte(data, amb_reg_temp_mid(attr->index))); +} + +static ssize_t show_amb_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", + 500 * amb_read_byte(data, amb_reg_temp_max(attr->index))); +} + +static ssize_t show_amb_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i5k_amb_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", + 500 * amb_read_byte(data, amb_reg_temp(attr->index))); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT, + attr->index & DIMM_MASK); +} + +static int i5k_amb_hwmon_init(struct platform_device *pdev) +{ + int i, j, k, d = 0; + u16 c; + int res = 0; + int num_ambs = 0; + struct i5k_amb_data *data = platform_get_drvdata(pdev); + + /* Count the number of AMBs found */ + /* ignore the high-order bit, see "Ugly hack" comment above */ + for (i = 0; i < MAX_MEM_CHANNELS; i++) + num_ambs += hweight16(data->amb_present[i] & 0x7fff); + + /* Set up sysfs stuff */ + data->attrs = kzalloc(array3_size(num_ambs, KNOBS_PER_AMB, + sizeof(*data->attrs)), + GFP_KERNEL); + if (!data->attrs) + return -ENOMEM; + data->num_attrs = 0; + + for (i = 0; i < MAX_MEM_CHANNELS; i++) { + c = data->amb_present[i]; + for (j = 0; j < REAL_MAX_AMBS_PER_CHANNEL; j++, c >>= 1) { + struct i5k_device_attribute *iattr; + + k = amb_num_from_reg(i, j); + if (!(c & 0x1)) + continue; + d++; + + /* sysfs label */ + iattr = data->attrs + data->num_attrs; + snprintf(iattr->name, AMB_SYSFS_NAME_LEN, + "temp%d_label", d); + iattr->s_attr.dev_attr.attr.name = iattr->name; + iattr->s_attr.dev_attr.attr.mode = 0444; + iattr->s_attr.dev_attr.show = show_label; + iattr->s_attr.index = k; + sysfs_attr_init(&iattr->s_attr.dev_attr.attr); + res = device_create_file(&pdev->dev, + &iattr->s_attr.dev_attr); + if (res) + goto exit_remove; + data->num_attrs++; + + /* Temperature sysfs knob */ + iattr = data->attrs + data->num_attrs; + snprintf(iattr->name, AMB_SYSFS_NAME_LEN, + "temp%d_input", d); + iattr->s_attr.dev_attr.attr.name = iattr->name; + iattr->s_attr.dev_attr.attr.mode = 0444; + iattr->s_attr.dev_attr.show = show_amb_temp; + iattr->s_attr.index = k; + sysfs_attr_init(&iattr->s_attr.dev_attr.attr); + res = device_create_file(&pdev->dev, + &iattr->s_attr.dev_attr); + if (res) + goto exit_remove; + data->num_attrs++; + + /* Temperature min sysfs knob */ + iattr = data->attrs + data->num_attrs; + snprintf(iattr->name, AMB_SYSFS_NAME_LEN, + "temp%d_min", d); + iattr->s_attr.dev_attr.attr.name = iattr->name; + iattr->s_attr.dev_attr.attr.mode = 0644; + iattr->s_attr.dev_attr.show = show_amb_min; + iattr->s_attr.dev_attr.store = store_amb_min; + iattr->s_attr.index = k; + sysfs_attr_init(&iattr->s_attr.dev_attr.attr); + res = device_create_file(&pdev->dev, + &iattr->s_attr.dev_attr); + if (res) + goto exit_remove; + data->num_attrs++; + + /* Temperature mid sysfs knob */ + iattr = data->attrs + data->num_attrs; + snprintf(iattr->name, AMB_SYSFS_NAME_LEN, + "temp%d_mid", d); + iattr->s_attr.dev_attr.attr.name = iattr->name; + iattr->s_attr.dev_attr.attr.mode = 0644; + iattr->s_attr.dev_attr.show = show_amb_mid; + iattr->s_attr.dev_attr.store = store_amb_mid; + iattr->s_attr.index = k; + sysfs_attr_init(&iattr->s_attr.dev_attr.attr); + res = device_create_file(&pdev->dev, + &iattr->s_attr.dev_attr); + if (res) + goto exit_remove; + data->num_attrs++; + + /* Temperature max sysfs knob */ + iattr = data->attrs + data->num_attrs; + snprintf(iattr->name, AMB_SYSFS_NAME_LEN, + "temp%d_max", d); + iattr->s_attr.dev_attr.attr.name = iattr->name; + iattr->s_attr.dev_attr.attr.mode = 0644; + iattr->s_attr.dev_attr.show = show_amb_max; + iattr->s_attr.dev_attr.store = store_amb_max; + iattr->s_attr.index = k; + sysfs_attr_init(&iattr->s_attr.dev_attr.attr); + res = device_create_file(&pdev->dev, + &iattr->s_attr.dev_attr); + if (res) + goto exit_remove; + data->num_attrs++; + + /* Temperature alarm sysfs knob */ + iattr = data->attrs + data->num_attrs; + snprintf(iattr->name, AMB_SYSFS_NAME_LEN, + "temp%d_alarm", d); + iattr->s_attr.dev_attr.attr.name = iattr->name; + iattr->s_attr.dev_attr.attr.mode = 0444; + iattr->s_attr.dev_attr.show = show_amb_alarm; + iattr->s_attr.index = k; + sysfs_attr_init(&iattr->s_attr.dev_attr.attr); + res = device_create_file(&pdev->dev, + &iattr->s_attr.dev_attr); + if (res) + goto exit_remove; + data->num_attrs++; + } + } + + res = device_create_file(&pdev->dev, &dev_attr_name); + if (res) + goto exit_remove; + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + res = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return res; + +exit_remove: + device_remove_file(&pdev->dev, &dev_attr_name); + for (i = 0; i < data->num_attrs; i++) + device_remove_file(&pdev->dev, &data->attrs[i].s_attr.dev_attr); + kfree(data->attrs); + + return res; +} + +static int i5k_amb_add(void) +{ + int res; + + /* only ever going to be one of these */ + amb_pdev = platform_device_alloc(DRVNAME, 0); + if (!amb_pdev) + return -ENOMEM; + + res = platform_device_add(amb_pdev); + if (res) + goto err; + return 0; + +err: + platform_device_put(amb_pdev); + return res; +} + +static int i5k_find_amb_registers(struct i5k_amb_data *data, + unsigned long devid) +{ + struct pci_dev *pcidev; + u32 val32; + int res = -ENODEV; + + /* Find AMB register memory space */ + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, + devid, + NULL); + if (!pcidev) + return -ENODEV; + + pci_read_config_dword(pcidev, I5K_REG_AMB_BASE_ADDR, &val32); + if (val32 == (u32)~0) + goto out; + data->amb_base = val32; + + pci_read_config_dword(pcidev, I5K_REG_AMB_LEN_ADDR, &val32); + if (val32 == (u32)~0) + goto out; + data->amb_len = val32; + + /* Is it big enough? */ + if (data->amb_len < AMB_CONFIG_SIZE * MAX_AMBS) { + dev_err(&pcidev->dev, "AMB region too small!\n"); + goto out; + } + + res = 0; +out: + pci_dev_put(pcidev); + return res; +} + +static int i5k_channel_probe(u16 *amb_present, unsigned long dev_id) +{ + struct pci_dev *pcidev; + u16 val16; + int res = -ENODEV; + + /* Copy the DIMM presence map for these two channels */ + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL); + if (!pcidev) + return -ENODEV; + + pci_read_config_word(pcidev, I5K_REG_CHAN0_PRESENCE_ADDR, &val16); + if (val16 == (u16)~0) + goto out; + amb_present[0] = val16; + + pci_read_config_word(pcidev, I5K_REG_CHAN1_PRESENCE_ADDR, &val16); + if (val16 == (u16)~0) + goto out; + amb_present[1] = val16; + + res = 0; + +out: + pci_dev_put(pcidev); + return res; +} + +static struct { + unsigned long err; + unsigned long fbd0; +} chipset_ids[] = { + { PCI_DEVICE_ID_INTEL_5000_ERR, PCI_DEVICE_ID_INTEL_5000_FBD0 }, + { PCI_DEVICE_ID_INTEL_5400_ERR, PCI_DEVICE_ID_INTEL_5400_FBD0 }, + { 0, 0 } +}; + +#ifdef MODULE +static const struct pci_device_id i5k_amb_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, i5k_amb_ids); +#endif + +static int i5k_amb_probe(struct platform_device *pdev) +{ + struct i5k_amb_data *data; + struct resource *reso; + int i, res; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* Figure out where the AMB registers live */ + i = 0; + do { + res = i5k_find_amb_registers(data, chipset_ids[i].err); + if (res == 0) + break; + i++; + } while (chipset_ids[i].err); + + if (res) + goto err; + + /* Copy the DIMM presence map for the first two channels */ + res = i5k_channel_probe(&data->amb_present[0], chipset_ids[i].fbd0); + if (res) + goto err; + + /* Copy the DIMM presence map for the optional second two channels */ + i5k_channel_probe(&data->amb_present[2], chipset_ids[i].fbd0 + 1); + + /* Set up resource regions */ + reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME); + if (!reso) { + res = -EBUSY; + goto err; + } + + data->amb_mmio = ioremap(data->amb_base, data->amb_len); + if (!data->amb_mmio) { + res = -EBUSY; + goto err_map_failed; + } + + platform_set_drvdata(pdev, data); + + res = i5k_amb_hwmon_init(pdev); + if (res) + goto err_init_failed; + + return res; + +err_init_failed: + iounmap(data->amb_mmio); +err_map_failed: + release_mem_region(data->amb_base, data->amb_len); +err: + kfree(data); + return res; +} + +static int i5k_amb_remove(struct platform_device *pdev) +{ + int i; + struct i5k_amb_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + device_remove_file(&pdev->dev, &dev_attr_name); + for (i = 0; i < data->num_attrs; i++) + device_remove_file(&pdev->dev, &data->attrs[i].s_attr.dev_attr); + kfree(data->attrs); + iounmap(data->amb_mmio); + release_mem_region(data->amb_base, data->amb_len); + kfree(data); + return 0; +} + +static struct platform_driver i5k_amb_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = i5k_amb_probe, + .remove = i5k_amb_remove, +}; + +static int __init i5k_amb_init(void) +{ + int res; + + res = platform_driver_register(&i5k_amb_driver); + if (res) + return res; + + res = i5k_amb_add(); + if (res) + platform_driver_unregister(&i5k_amb_driver); + + return res; +} + +static void __exit i5k_amb_exit(void) +{ + platform_device_unregister(amb_pdev); + platform_driver_unregister(&i5k_amb_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("Intel 5000 chipset FB-DIMM AMB temperature sensor"); +MODULE_LICENSE("GPL"); + +module_init(i5k_amb_init); +module_exit(i5k_amb_exit); -- cgit v1.2.3