From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/ina2xx.c | 728 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 728 insertions(+) create mode 100644 drivers/hwmon/ina2xx.c (limited to 'drivers/hwmon/ina2xx.c') diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c new file mode 100644 index 000000000..00fc70305 --- /dev/null +++ b/drivers/hwmon/ina2xx.c @@ -0,0 +1,728 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Texas Instruments INA219, INA226 power monitor chips + * + * INA219: + * Zero Drift Bi-Directional Current/Power Monitor with I2C Interface + * Datasheet: https://www.ti.com/product/ina219 + * + * INA220: + * Bi-Directional Current/Power Monitor with I2C Interface + * Datasheet: https://www.ti.com/product/ina220 + * + * INA226: + * Bi-Directional Current/Power Monitor with I2C Interface + * Datasheet: https://www.ti.com/product/ina226 + * + * INA230: + * Bi-directional Current/Power Monitor with I2C Interface + * Datasheet: https://www.ti.com/product/ina230 + * + * Copyright (C) 2012 Lothar Felten + * Thanks to Jan Volkering + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* common register definitions */ +#define INA2XX_CONFIG 0x00 +#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */ +#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */ +#define INA2XX_POWER 0x03 /* readonly */ +#define INA2XX_CURRENT 0x04 /* readonly */ +#define INA2XX_CALIBRATION 0x05 + +/* INA226 register definitions */ +#define INA226_MASK_ENABLE 0x06 +#define INA226_ALERT_LIMIT 0x07 +#define INA226_DIE_ID 0xFF + +/* register count */ +#define INA219_REGISTERS 6 +#define INA226_REGISTERS 8 + +#define INA2XX_MAX_REGISTERS 8 + +/* settings - depend on use case */ +#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */ +#define INA226_CONFIG_DEFAULT 0x4527 /* averages=16 */ + +/* worst case is 68.10 ms (~14.6Hz, ina219) */ +#define INA2XX_CONVERSION_RATE 15 +#define INA2XX_MAX_DELAY 69 /* worst case delay in ms */ + +#define INA2XX_RSHUNT_DEFAULT 10000 + +/* bit mask for reading the averaging setting in the configuration register */ +#define INA226_AVG_RD_MASK 0x0E00 + +#define INA226_READ_AVG(reg) (((reg) & INA226_AVG_RD_MASK) >> 9) +#define INA226_SHIFT_AVG(val) ((val) << 9) + +/* bit number of alert functions in Mask/Enable Register */ +#define INA226_SHUNT_OVER_VOLTAGE_BIT 15 +#define INA226_SHUNT_UNDER_VOLTAGE_BIT 14 +#define INA226_BUS_OVER_VOLTAGE_BIT 13 +#define INA226_BUS_UNDER_VOLTAGE_BIT 12 +#define INA226_POWER_OVER_LIMIT_BIT 11 + +/* bit mask for alert config bits of Mask/Enable Register */ +#define INA226_ALERT_CONFIG_MASK 0xFC00 +#define INA226_ALERT_FUNCTION_FLAG BIT(4) + +/* common attrs, ina226 attrs and NULL */ +#define INA2XX_MAX_ATTRIBUTE_GROUPS 3 + +/* + * Both bus voltage and shunt voltage conversion times for ina226 are set + * to 0b0100 on POR, which translates to 2200 microseconds in total. + */ +#define INA226_TOTAL_CONV_TIME_DEFAULT 2200 + +static struct regmap_config ina2xx_regmap_config = { + .reg_bits = 8, + .val_bits = 16, +}; + +enum ina2xx_ids { ina219, ina226 }; + +struct ina2xx_config { + u16 config_default; + int calibration_value; + int registers; + int shunt_div; + int bus_voltage_shift; + int bus_voltage_lsb; /* uV */ + int power_lsb_factor; +}; + +struct ina2xx_data { + const struct ina2xx_config *config; + + long rshunt; + long current_lsb_uA; + long power_lsb_uW; + struct mutex config_lock; + struct regmap *regmap; + + const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS]; +}; + +static const struct ina2xx_config ina2xx_config[] = { + [ina219] = { + .config_default = INA219_CONFIG_DEFAULT, + .calibration_value = 4096, + .registers = INA219_REGISTERS, + .shunt_div = 100, + .bus_voltage_shift = 3, + .bus_voltage_lsb = 4000, + .power_lsb_factor = 20, + }, + [ina226] = { + .config_default = INA226_CONFIG_DEFAULT, + .calibration_value = 2048, + .registers = INA226_REGISTERS, + .shunt_div = 400, + .bus_voltage_shift = 0, + .bus_voltage_lsb = 1250, + .power_lsb_factor = 25, + }, +}; + +/* + * Available averaging rates for ina226. The indices correspond with + * the bit values expected by the chip (according to the ina226 datasheet, + * table 3 AVG bit settings, found at + * https://www.ti.com/lit/ds/symlink/ina226.pdf. + */ +static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 }; + +static int ina226_reg_to_interval(u16 config) +{ + int avg = ina226_avg_tab[INA226_READ_AVG(config)]; + + /* + * Multiply the total conversion time by the number of averages. + * Return the result in milliseconds. + */ + return DIV_ROUND_CLOSEST(avg * INA226_TOTAL_CONV_TIME_DEFAULT, 1000); +} + +/* + * Return the new, shifted AVG field value of CONFIG register, + * to use with regmap_update_bits + */ +static u16 ina226_interval_to_reg(int interval) +{ + int avg, avg_bits; + + avg = DIV_ROUND_CLOSEST(interval * 1000, + INA226_TOTAL_CONV_TIME_DEFAULT); + avg_bits = find_closest(avg, ina226_avg_tab, + ARRAY_SIZE(ina226_avg_tab)); + + return INA226_SHIFT_AVG(avg_bits); +} + +/* + * Calibration register is set to the best value, which eliminates + * truncation errors on calculating current register in hardware. + * According to datasheet (eq. 3) the best values are 2048 for + * ina226 and 4096 for ina219. They are hardcoded as calibration_value. + */ +static int ina2xx_calibrate(struct ina2xx_data *data) +{ + return regmap_write(data->regmap, INA2XX_CALIBRATION, + data->config->calibration_value); +} + +/* + * Initialize the configuration and calibration registers. + */ +static int ina2xx_init(struct ina2xx_data *data) +{ + int ret = regmap_write(data->regmap, INA2XX_CONFIG, + data->config->config_default); + if (ret < 0) + return ret; + + return ina2xx_calibrate(data); +} + +static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval) +{ + struct ina2xx_data *data = dev_get_drvdata(dev); + int ret, retry; + + dev_dbg(dev, "Starting register %d read\n", reg); + + for (retry = 5; retry; retry--) { + + ret = regmap_read(data->regmap, reg, regval); + if (ret < 0) + return ret; + + dev_dbg(dev, "read %d, val = 0x%04x\n", reg, *regval); + + /* + * If the current value in the calibration register is 0, the + * power and current registers will also remain at 0. In case + * the chip has been reset let's check the calibration + * register and reinitialize if needed. + * We do that extra read of the calibration register if there + * is some hint of a chip reset. + */ + if (*regval == 0) { + unsigned int cal; + + ret = regmap_read(data->regmap, INA2XX_CALIBRATION, + &cal); + if (ret < 0) + return ret; + + if (cal == 0) { + dev_warn(dev, "chip not calibrated, reinitializing\n"); + + ret = ina2xx_init(data); + if (ret < 0) + return ret; + /* + * Let's make sure the power and current + * registers have been updated before trying + * again. + */ + msleep(INA2XX_MAX_DELAY); + continue; + } + } + return 0; + } + + /* + * If we're here then although all write operations succeeded, the + * chip still returns 0 in the calibration register. Nothing more we + * can do here. + */ + dev_err(dev, "unable to reinitialize the chip\n"); + return -ENODEV; +} + +static int ina2xx_get_value(struct ina2xx_data *data, u8 reg, + unsigned int regval) +{ + int val; + + switch (reg) { + case INA2XX_SHUNT_VOLTAGE: + /* signed register */ + val = DIV_ROUND_CLOSEST((s16)regval, data->config->shunt_div); + break; + case INA2XX_BUS_VOLTAGE: + val = (regval >> data->config->bus_voltage_shift) + * data->config->bus_voltage_lsb; + val = DIV_ROUND_CLOSEST(val, 1000); + break; + case INA2XX_POWER: + val = regval * data->power_lsb_uW; + break; + case INA2XX_CURRENT: + /* signed register, result in mA */ + val = (s16)regval * data->current_lsb_uA; + val = DIV_ROUND_CLOSEST(val, 1000); + break; + case INA2XX_CALIBRATION: + val = regval; + break; + default: + /* programmer goofed */ + WARN_ON_ONCE(1); + val = 0; + break; + } + + return val; +} + +static ssize_t ina2xx_value_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ina2xx_data *data = dev_get_drvdata(dev); + unsigned int regval; + + int err = ina2xx_read_reg(dev, attr->index, ®val); + + if (err < 0) + return err; + + return sysfs_emit(buf, "%d\n", ina2xx_get_value(data, attr->index, regval)); +} + +static int ina226_reg_to_alert(struct ina2xx_data *data, u8 bit, u16 regval) +{ + int reg; + + switch (bit) { + case INA226_SHUNT_OVER_VOLTAGE_BIT: + case INA226_SHUNT_UNDER_VOLTAGE_BIT: + reg = INA2XX_SHUNT_VOLTAGE; + break; + case INA226_BUS_OVER_VOLTAGE_BIT: + case INA226_BUS_UNDER_VOLTAGE_BIT: + reg = INA2XX_BUS_VOLTAGE; + break; + case INA226_POWER_OVER_LIMIT_BIT: + reg = INA2XX_POWER; + break; + default: + /* programmer goofed */ + WARN_ON_ONCE(1); + return 0; + } + + return ina2xx_get_value(data, reg, regval); +} + +/* + * Turns alert limit values into register values. + * Opposite of the formula in ina2xx_get_value(). + */ +static s16 ina226_alert_to_reg(struct ina2xx_data *data, u8 bit, int val) +{ + switch (bit) { + case INA226_SHUNT_OVER_VOLTAGE_BIT: + case INA226_SHUNT_UNDER_VOLTAGE_BIT: + val *= data->config->shunt_div; + return clamp_val(val, SHRT_MIN, SHRT_MAX); + case INA226_BUS_OVER_VOLTAGE_BIT: + case INA226_BUS_UNDER_VOLTAGE_BIT: + val = (val * 1000) << data->config->bus_voltage_shift; + val = DIV_ROUND_CLOSEST(val, data->config->bus_voltage_lsb); + return clamp_val(val, 0, SHRT_MAX); + case INA226_POWER_OVER_LIMIT_BIT: + val = DIV_ROUND_CLOSEST(val, data->power_lsb_uW); + return clamp_val(val, 0, USHRT_MAX); + default: + /* programmer goofed */ + WARN_ON_ONCE(1); + return 0; + } +} + +static ssize_t ina226_alert_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ina2xx_data *data = dev_get_drvdata(dev); + int regval; + int val = 0; + int ret; + + mutex_lock(&data->config_lock); + ret = regmap_read(data->regmap, INA226_MASK_ENABLE, ®val); + if (ret) + goto abort; + + if (regval & BIT(attr->index)) { + ret = regmap_read(data->regmap, INA226_ALERT_LIMIT, ®val); + if (ret) + goto abort; + val = ina226_reg_to_alert(data, attr->index, regval); + } + + ret = sysfs_emit(buf, "%d\n", val); +abort: + mutex_unlock(&data->config_lock); + return ret; +} + +static ssize_t ina226_alert_store(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ina2xx_data *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret < 0) + return ret; + + /* + * Clear all alerts first to avoid accidentally triggering ALERT pin + * due to register write sequence. Then, only enable the alert + * if the value is non-zero. + */ + mutex_lock(&data->config_lock); + ret = regmap_update_bits(data->regmap, INA226_MASK_ENABLE, + INA226_ALERT_CONFIG_MASK, 0); + if (ret < 0) + goto abort; + + ret = regmap_write(data->regmap, INA226_ALERT_LIMIT, + ina226_alert_to_reg(data, attr->index, val)); + if (ret < 0) + goto abort; + + if (val != 0) { + ret = regmap_update_bits(data->regmap, INA226_MASK_ENABLE, + INA226_ALERT_CONFIG_MASK, + BIT(attr->index)); + if (ret < 0) + goto abort; + } + + ret = count; +abort: + mutex_unlock(&data->config_lock); + return ret; +} + +static ssize_t ina226_alarm_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ina2xx_data *data = dev_get_drvdata(dev); + int regval; + int alarm = 0; + int ret; + + ret = regmap_read(data->regmap, INA226_MASK_ENABLE, ®val); + if (ret) + return ret; + + alarm = (regval & BIT(attr->index)) && + (regval & INA226_ALERT_FUNCTION_FLAG); + return sysfs_emit(buf, "%d\n", alarm); +} + +/* + * In order to keep calibration register value fixed, the product + * of current_lsb and shunt_resistor should also be fixed and equal + * to shunt_voltage_lsb = 1 / shunt_div multiplied by 10^9 in order + * to keep the scale. + */ +static int ina2xx_set_shunt(struct ina2xx_data *data, long val) +{ + unsigned int dividend = DIV_ROUND_CLOSEST(1000000000, + data->config->shunt_div); + if (val <= 0 || val > dividend) + return -EINVAL; + + mutex_lock(&data->config_lock); + data->rshunt = val; + data->current_lsb_uA = DIV_ROUND_CLOSEST(dividend, val); + data->power_lsb_uW = data->config->power_lsb_factor * + data->current_lsb_uA; + mutex_unlock(&data->config_lock); + + return 0; +} + +static ssize_t ina2xx_shunt_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct ina2xx_data *data = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%li\n", data->rshunt); +} + +static ssize_t ina2xx_shunt_store(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + unsigned long val; + int status; + struct ina2xx_data *data = dev_get_drvdata(dev); + + status = kstrtoul(buf, 10, &val); + if (status < 0) + return status; + + status = ina2xx_set_shunt(data, val); + if (status < 0) + return status; + return count; +} + +static ssize_t ina226_interval_store(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct ina2xx_data *data = dev_get_drvdata(dev); + unsigned long val; + int status; + + status = kstrtoul(buf, 10, &val); + if (status < 0) + return status; + + if (val > INT_MAX || val == 0) + return -EINVAL; + + status = regmap_update_bits(data->regmap, INA2XX_CONFIG, + INA226_AVG_RD_MASK, + ina226_interval_to_reg(val)); + if (status < 0) + return status; + + return count; +} + +static ssize_t ina226_interval_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct ina2xx_data *data = dev_get_drvdata(dev); + int status; + unsigned int regval; + + status = regmap_read(data->regmap, INA2XX_CONFIG, ®val); + if (status) + return status; + + return sysfs_emit(buf, "%d\n", ina226_reg_to_interval(regval)); +} + +/* shunt voltage */ +static SENSOR_DEVICE_ATTR_RO(in0_input, ina2xx_value, INA2XX_SHUNT_VOLTAGE); +/* shunt voltage over/under voltage alert setting and alarm */ +static SENSOR_DEVICE_ATTR_RW(in0_crit, ina226_alert, + INA226_SHUNT_OVER_VOLTAGE_BIT); +static SENSOR_DEVICE_ATTR_RW(in0_lcrit, ina226_alert, + INA226_SHUNT_UNDER_VOLTAGE_BIT); +static SENSOR_DEVICE_ATTR_RO(in0_crit_alarm, ina226_alarm, + INA226_SHUNT_OVER_VOLTAGE_BIT); +static SENSOR_DEVICE_ATTR_RO(in0_lcrit_alarm, ina226_alarm, + INA226_SHUNT_UNDER_VOLTAGE_BIT); + +/* bus voltage */ +static SENSOR_DEVICE_ATTR_RO(in1_input, ina2xx_value, INA2XX_BUS_VOLTAGE); +/* bus voltage over/under voltage alert setting and alarm */ +static SENSOR_DEVICE_ATTR_RW(in1_crit, ina226_alert, + INA226_BUS_OVER_VOLTAGE_BIT); +static SENSOR_DEVICE_ATTR_RW(in1_lcrit, ina226_alert, + INA226_BUS_UNDER_VOLTAGE_BIT); +static SENSOR_DEVICE_ATTR_RO(in1_crit_alarm, ina226_alarm, + INA226_BUS_OVER_VOLTAGE_BIT); +static SENSOR_DEVICE_ATTR_RO(in1_lcrit_alarm, ina226_alarm, + INA226_BUS_UNDER_VOLTAGE_BIT); + +/* calculated current */ +static SENSOR_DEVICE_ATTR_RO(curr1_input, ina2xx_value, INA2XX_CURRENT); + +/* calculated power */ +static SENSOR_DEVICE_ATTR_RO(power1_input, ina2xx_value, INA2XX_POWER); +/* over-limit power alert setting and alarm */ +static SENSOR_DEVICE_ATTR_RW(power1_crit, ina226_alert, + INA226_POWER_OVER_LIMIT_BIT); +static SENSOR_DEVICE_ATTR_RO(power1_crit_alarm, ina226_alarm, + INA226_POWER_OVER_LIMIT_BIT); + +/* shunt resistance */ +static SENSOR_DEVICE_ATTR_RW(shunt_resistor, ina2xx_shunt, INA2XX_CALIBRATION); + +/* update interval (ina226 only) */ +static SENSOR_DEVICE_ATTR_RW(update_interval, ina226_interval, 0); + +/* pointers to created device attributes */ +static struct attribute *ina2xx_attrs[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_shunt_resistor.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ina2xx_group = { + .attrs = ina2xx_attrs, +}; + +static struct attribute *ina226_attrs[] = { + &sensor_dev_attr_in0_crit.dev_attr.attr, + &sensor_dev_attr_in0_lcrit.dev_attr.attr, + &sensor_dev_attr_in0_crit_alarm.dev_attr.attr, + &sensor_dev_attr_in0_lcrit_alarm.dev_attr.attr, + &sensor_dev_attr_in1_crit.dev_attr.attr, + &sensor_dev_attr_in1_lcrit.dev_attr.attr, + &sensor_dev_attr_in1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_in1_lcrit_alarm.dev_attr.attr, + &sensor_dev_attr_power1_crit.dev_attr.attr, + &sensor_dev_attr_power1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_update_interval.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ina226_group = { + .attrs = ina226_attrs, +}; + +static const struct i2c_device_id ina2xx_id[]; + +static int ina2xx_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ina2xx_data *data; + struct device *hwmon_dev; + u32 val; + int ret, group = 0; + enum ina2xx_ids chip; + + if (client->dev.of_node) + chip = (enum ina2xx_ids)of_device_get_match_data(&client->dev); + else + chip = i2c_match_id(ina2xx_id, client)->driver_data; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* set the device type */ + data->config = &ina2xx_config[chip]; + mutex_init(&data->config_lock); + + if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) { + struct ina2xx_platform_data *pdata = dev_get_platdata(dev); + + if (pdata) + val = pdata->shunt_uohms; + else + val = INA2XX_RSHUNT_DEFAULT; + } + + ina2xx_set_shunt(data, val); + + ina2xx_regmap_config.max_register = data->config->registers; + + data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(dev, "failed to allocate register map\n"); + return PTR_ERR(data->regmap); + } + + ret = ina2xx_init(data); + if (ret < 0) { + dev_err(dev, "error configuring the device: %d\n", ret); + return -ENODEV; + } + + data->groups[group++] = &ina2xx_group; + if (chip == ina226) + data->groups[group++] = &ina226_group; + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n", + client->name, data->rshunt); + + return 0; +} + +static const struct i2c_device_id ina2xx_id[] = { + { "ina219", ina219 }, + { "ina220", ina219 }, + { "ina226", ina226 }, + { "ina230", ina226 }, + { "ina231", ina226 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ina2xx_id); + +static const struct of_device_id __maybe_unused ina2xx_of_match[] = { + { + .compatible = "ti,ina219", + .data = (void *)ina219 + }, + { + .compatible = "ti,ina220", + .data = (void *)ina219 + }, + { + .compatible = "ti,ina226", + .data = (void *)ina226 + }, + { + .compatible = "ti,ina230", + .data = (void *)ina226 + }, + { + .compatible = "ti,ina231", + .data = (void *)ina226 + }, + { }, +}; +MODULE_DEVICE_TABLE(of, ina2xx_of_match); + +static struct i2c_driver ina2xx_driver = { + .driver = { + .name = "ina2xx", + .of_match_table = of_match_ptr(ina2xx_of_match), + }, + .probe_new = ina2xx_probe, + .id_table = ina2xx_id, +}; + +module_i2c_driver(ina2xx_driver); + +MODULE_AUTHOR("Lothar Felten "); +MODULE_DESCRIPTION("ina2xx driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3