From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/lm73.c | 290 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 290 insertions(+) create mode 100644 drivers/hwmon/lm73.c (limited to 'drivers/hwmon/lm73.c') diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c new file mode 100644 index 000000000..b6433ae2d --- /dev/null +++ b/drivers/hwmon/lm73.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LM73 Sensor driver + * Based on LM75 + * + * Copyright (C) 2007, CenoSYS (www.cenosys.com). + * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu). + * + * Guillaume Ligneul + * Adrien Demarez + * Jeremy Laine + * Chris Verges + */ + +#include +#include +#include +#include +#include +#include + + +/* Addresses scanned */ +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, + 0x4d, 0x4e, I2C_CLIENT_END }; + +/* LM73 registers */ +#define LM73_REG_INPUT 0x00 +#define LM73_REG_CONF 0x01 +#define LM73_REG_MAX 0x02 +#define LM73_REG_MIN 0x03 +#define LM73_REG_CTRL 0x04 +#define LM73_REG_ID 0x07 + +#define LM73_ID 0x9001 /* 0x0190, byte-swapped */ +#define DRVNAME "lm73" +#define LM73_TEMP_MIN (-256000 / 250) +#define LM73_TEMP_MAX (255750 / 250) + +#define LM73_CTRL_RES_SHIFT 5 +#define LM73_CTRL_RES_MASK (BIT(5) | BIT(6)) +#define LM73_CTRL_TO_MASK BIT(7) + +#define LM73_CTRL_HI_SHIFT 2 +#define LM73_CTRL_LO_SHIFT 1 + +static const unsigned short lm73_convrates[] = { + 14, /* 11-bits (0.25000 C/LSB): RES1 Bit = 0, RES0 Bit = 0 */ + 28, /* 12-bits (0.12500 C/LSB): RES1 Bit = 0, RES0 Bit = 1 */ + 56, /* 13-bits (0.06250 C/LSB): RES1 Bit = 1, RES0 Bit = 0 */ + 112, /* 14-bits (0.03125 C/LSB): RES1 Bit = 1, RES0 Bit = 1 */ +}; + +struct lm73_data { + struct i2c_client *client; + struct mutex lock; + u8 ctrl; /* control register value */ +}; + +/*-----------------------------------------------------------------------*/ + +static ssize_t temp_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct lm73_data *data = dev_get_drvdata(dev); + long temp; + short value; + s32 err; + + int status = kstrtol(buf, 10, &temp); + if (status < 0) + return status; + + /* Write value */ + value = clamp_val(temp / 250, LM73_TEMP_MIN, LM73_TEMP_MAX) << 5; + err = i2c_smbus_write_word_swapped(data->client, attr->index, value); + return (err < 0) ? err : count; +} + +static ssize_t temp_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct lm73_data *data = dev_get_drvdata(dev); + int temp; + + s32 err = i2c_smbus_read_word_swapped(data->client, attr->index); + if (err < 0) + return err; + + /* use integer division instead of equivalent right shift to + guarantee arithmetic shift and preserve the sign */ + temp = (((s16) err) * 250) / 32; + return sysfs_emit(buf, "%d\n", temp); +} + +static ssize_t convrate_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct lm73_data *data = dev_get_drvdata(dev); + unsigned long convrate; + s32 err; + int res = 0; + + err = kstrtoul(buf, 10, &convrate); + if (err < 0) + return err; + + /* + * Convert the desired conversion rate into register bits. + * res is already initialized, and everything past the second-to-last + * value in the array is treated as belonging to the last value + * in the array. + */ + while (res < (ARRAY_SIZE(lm73_convrates) - 1) && + convrate > lm73_convrates[res]) + res++; + + mutex_lock(&data->lock); + data->ctrl &= LM73_CTRL_TO_MASK; + data->ctrl |= res << LM73_CTRL_RES_SHIFT; + err = i2c_smbus_write_byte_data(data->client, LM73_REG_CTRL, + data->ctrl); + mutex_unlock(&data->lock); + + if (err < 0) + return err; + + return count; +} + +static ssize_t convrate_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct lm73_data *data = dev_get_drvdata(dev); + int res; + + res = (data->ctrl & LM73_CTRL_RES_MASK) >> LM73_CTRL_RES_SHIFT; + return sysfs_emit(buf, "%hu\n", lm73_convrates[res]); +} + +static ssize_t maxmin_alarm_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct lm73_data *data = dev_get_drvdata(dev); + s32 ctrl; + + mutex_lock(&data->lock); + ctrl = i2c_smbus_read_byte_data(data->client, LM73_REG_CTRL); + if (ctrl < 0) + goto abort; + data->ctrl = ctrl; + mutex_unlock(&data->lock); + + return sysfs_emit(buf, "%d\n", (ctrl >> attr->index) & 1); + +abort: + mutex_unlock(&data->lock); + return ctrl; +} + +/*-----------------------------------------------------------------------*/ + +/* sysfs attributes for hwmon */ + +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, LM73_REG_MAX); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, LM73_REG_MIN); +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, LM73_REG_INPUT); +static SENSOR_DEVICE_ATTR_RW(update_interval, convrate, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, maxmin_alarm, + LM73_CTRL_HI_SHIFT); +static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, maxmin_alarm, + LM73_CTRL_LO_SHIFT); + +static struct attribute *lm73_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_update_interval.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(lm73); + +/*-----------------------------------------------------------------------*/ + +/* device probe and removal */ + +static int +lm73_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct lm73_data *data; + int ctrl; + + data = devm_kzalloc(dev, sizeof(struct lm73_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->lock); + + ctrl = i2c_smbus_read_byte_data(client, LM73_REG_CTRL); + if (ctrl < 0) + return ctrl; + data->ctrl = ctrl; + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, lm73_groups); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_info(dev, "sensor '%s'\n", client->name); + + return 0; +} + +static const struct i2c_device_id lm73_ids[] = { + { "lm73", 0 }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, lm73_ids); + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm73_detect(struct i2c_client *new_client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int id, ctrl, conf; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + /* + * Do as much detection as possible with byte reads first, as word + * reads can confuse other devices. + */ + ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL); + if (ctrl < 0 || (ctrl & 0x10)) + return -ENODEV; + + conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF); + if (conf < 0 || (conf & 0x0c)) + return -ENODEV; + + id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID); + if (id < 0 || id != (LM73_ID & 0xff)) + return -ENODEV; + + /* Check device ID */ + id = i2c_smbus_read_word_data(new_client, LM73_REG_ID); + if (id < 0 || id != LM73_ID) + return -ENODEV; + + strscpy(info->type, "lm73", I2C_NAME_SIZE); + + return 0; +} + +static const struct of_device_id lm73_of_match[] = { + { + .compatible = "ti,lm73", + }, + { }, +}; + +MODULE_DEVICE_TABLE(of, lm73_of_match); + +static struct i2c_driver lm73_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "lm73", + .of_match_table = lm73_of_match, + }, + .probe_new = lm73_probe, + .id_table = lm73_ids, + .detect = lm73_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(lm73_driver); + +MODULE_AUTHOR("Guillaume Ligneul "); +MODULE_DESCRIPTION("LM73 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3