From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/ltc4215.c | 266 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 266 insertions(+) create mode 100644 drivers/hwmon/ltc4215.c (limited to 'drivers/hwmon/ltc4215.c') diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c new file mode 100644 index 000000000..fa43d26dd --- /dev/null +++ b/drivers/hwmon/ltc4215.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Linear Technology LTC4215 I2C Hot Swap Controller + * + * Copyright (C) 2009 Ira W. Snyder + * + * Datasheet: + * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Here are names of the chip's registers (a.k.a. commands) */ +enum ltc4215_cmd { + LTC4215_CONTROL = 0x00, /* rw */ + LTC4215_ALERT = 0x01, /* rw */ + LTC4215_STATUS = 0x02, /* ro */ + LTC4215_FAULT = 0x03, /* rw */ + LTC4215_SENSE = 0x04, /* rw */ + LTC4215_SOURCE = 0x05, /* rw */ + LTC4215_ADIN = 0x06, /* rw */ +}; + +struct ltc4215_data { + struct i2c_client *client; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* Registers */ + u8 regs[7]; +}; + +static struct ltc4215_data *ltc4215_update_device(struct device *dev) +{ + struct ltc4215_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + s32 val; + int i; + + mutex_lock(&data->update_lock); + + /* The chip's A/D updates 10 times per second */ + if (time_after(jiffies, data->last_updated + HZ / 10) || !data->valid) { + + dev_dbg(&client->dev, "Starting ltc4215 update\n"); + + /* Read all registers */ + for (i = 0; i < ARRAY_SIZE(data->regs); i++) { + val = i2c_smbus_read_byte_data(client, i); + if (unlikely(val < 0)) + data->regs[i] = 0; + else + data->regs[i] = val; + } + + data->last_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* Return the voltage from the given register in millivolts */ +static int ltc4215_get_voltage(struct device *dev, u8 reg) +{ + struct ltc4215_data *data = ltc4215_update_device(dev); + const u8 regval = data->regs[reg]; + u32 voltage = 0; + + switch (reg) { + case LTC4215_SENSE: + /* 151 uV per increment */ + voltage = regval * 151 / 1000; + break; + case LTC4215_SOURCE: + /* 60.5 mV per increment */ + voltage = regval * 605 / 10; + break; + case LTC4215_ADIN: + /* + * The ADIN input is divided by 12.5, and has 4.82 mV + * per increment, so we have the additional multiply + */ + voltage = regval * 482 * 125 / 1000; + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + break; + } + + return voltage; +} + +/* Return the current from the sense resistor in mA */ +static unsigned int ltc4215_get_current(struct device *dev) +{ + struct ltc4215_data *data = ltc4215_update_device(dev); + + /* + * The strange looking conversions that follow are fixed-point + * math, since we cannot do floating point in the kernel. + * + * Step 1: convert sense register to microVolts + * Step 2: convert voltage to milliAmperes + * + * If you play around with the V=IR equation, you come up with + * the following: X uV / Y mOhm == Z mA + * + * With the resistors that are fractions of a milliOhm, we multiply + * the voltage and resistance by 10, to shift the decimal point. + * Now we can use the normal division operator again. + */ + + /* Calculate voltage in microVolts (151 uV per increment) */ + const unsigned int voltage = data->regs[LTC4215_SENSE] * 151; + + /* Calculate current in milliAmperes (4 milliOhm sense resistor) */ + const unsigned int curr = voltage / 4; + + return curr; +} + +static ssize_t ltc4215_voltage_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const int voltage = ltc4215_get_voltage(dev, attr->index); + + return sysfs_emit(buf, "%d\n", voltage); +} + +static ssize_t ltc4215_current_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + const unsigned int curr = ltc4215_get_current(dev); + + return sysfs_emit(buf, "%u\n", curr); +} + +static ssize_t ltc4215_power_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + const unsigned int curr = ltc4215_get_current(dev); + const int output_voltage = ltc4215_get_voltage(dev, LTC4215_ADIN); + + /* current in mA * voltage in mV == power in uW */ + const unsigned int power = abs(output_voltage * curr); + + return sysfs_emit(buf, "%u\n", power); +} + +static ssize_t ltc4215_alarm_show(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ltc4215_data *data = ltc4215_update_device(dev); + const u8 reg = data->regs[LTC4215_STATUS]; + const u32 mask = attr->index; + + return sysfs_emit(buf, "%u\n", !!(reg & mask)); +} + +/* + * These macros are used below in constructing device attribute objects + * for use with sysfs_create_group() to make a sysfs device file + * for each register. + */ + +/* Construct a sensor_device_attribute structure for each register */ + +/* Current */ +static SENSOR_DEVICE_ATTR_RO(curr1_input, ltc4215_current, 0); +static SENSOR_DEVICE_ATTR_RO(curr1_max_alarm, ltc4215_alarm, 1 << 2); + +/* Power (virtual) */ +static SENSOR_DEVICE_ATTR_RO(power1_input, ltc4215_power, 0); + +/* Input Voltage */ +static SENSOR_DEVICE_ATTR_RO(in1_input, ltc4215_voltage, LTC4215_ADIN); +static SENSOR_DEVICE_ATTR_RO(in1_max_alarm, ltc4215_alarm, 1 << 0); +static SENSOR_DEVICE_ATTR_RO(in1_min_alarm, ltc4215_alarm, 1 << 1); + +/* Output Voltage */ +static SENSOR_DEVICE_ATTR_RO(in2_input, ltc4215_voltage, LTC4215_SOURCE); +static SENSOR_DEVICE_ATTR_RO(in2_min_alarm, ltc4215_alarm, 1 << 3); + +/* + * Finally, construct an array of pointers to members of the above objects, + * as required for sysfs_create_group() + */ +static struct attribute *ltc4215_attrs[] = { + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + + &sensor_dev_attr_power1_input.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_max_alarm.dev_attr.attr, + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min_alarm.dev_attr.attr, + + NULL, +}; +ATTRIBUTE_GROUPS(ltc4215); + +static int ltc4215_probe(struct i2c_client *client) +{ + struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; + struct ltc4215_data *data; + struct device *hwmon_dev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->update_lock); + + /* Initialize the LTC4215 chip */ + i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, + ltc4215_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id ltc4215_id[] = { + { "ltc4215", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc4215_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver ltc4215_driver = { + .driver = { + .name = "ltc4215", + }, + .probe_new = ltc4215_probe, + .id_table = ltc4215_id, +}; + +module_i2c_driver(ltc4215_driver); + +MODULE_AUTHOR("Ira W. Snyder "); +MODULE_DESCRIPTION("LTC4215 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3