From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/max31730.c | 440 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 440 insertions(+) create mode 100644 drivers/hwmon/max31730.c (limited to 'drivers/hwmon/max31730.c') diff --git a/drivers/hwmon/max31730.c b/drivers/hwmon/max31730.c new file mode 100644 index 000000000..746a767c9 --- /dev/null +++ b/drivers/hwmon/max31730.c @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for MAX31730 3-Channel Remote Temperature Sensor + * + * Copyright (c) 2019 Guenter Roeck + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses scanned */ +static const unsigned short normal_i2c[] = { 0x1c, 0x1d, 0x1e, 0x1f, 0x4c, + 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; + +/* The MAX31730 registers */ +#define MAX31730_REG_TEMP 0x00 +#define MAX31730_REG_CONF 0x13 +#define MAX31730_STOP BIT(7) +#define MAX31730_EXTRANGE BIT(1) +#define MAX31730_REG_TEMP_OFFSET 0x16 +#define MAX31730_TEMP_OFFSET_BASELINE 0x77 +#define MAX31730_REG_OFFSET_ENABLE 0x17 +#define MAX31730_REG_TEMP_MAX 0x20 +#define MAX31730_REG_TEMP_MIN 0x30 +#define MAX31730_REG_STATUS_HIGH 0x32 +#define MAX31730_REG_STATUS_LOW 0x33 +#define MAX31730_REG_CHANNEL_ENABLE 0x35 +#define MAX31730_REG_TEMP_FAULT 0x36 + +#define MAX31730_REG_MFG_ID 0x50 +#define MAX31730_MFG_ID 0x4d +#define MAX31730_REG_MFG_REV 0x51 +#define MAX31730_MFG_REV 0x01 + +#define MAX31730_TEMP_MIN (-128000) +#define MAX31730_TEMP_MAX 127937 + +/* Each client has this additional data */ +struct max31730_data { + struct i2c_client *client; + u8 orig_conf; + u8 current_conf; + u8 offset_enable; + u8 channel_enable; +}; + +/*-----------------------------------------------------------------------*/ + +static inline long max31730_reg_to_mc(s16 temp) +{ + return DIV_ROUND_CLOSEST((temp >> 4) * 1000, 16); +} + +static int max31730_write_config(struct max31730_data *data, u8 set_mask, + u8 clr_mask) +{ + u8 value; + + clr_mask |= MAX31730_EXTRANGE; + value = data->current_conf & ~clr_mask; + value |= set_mask; + + if (data->current_conf != value) { + s32 err; + + err = i2c_smbus_write_byte_data(data->client, MAX31730_REG_CONF, + value); + if (err) + return err; + data->current_conf = value; + } + return 0; +} + +static int max31730_set_enable(struct i2c_client *client, int reg, + u8 *confdata, int channel, bool enable) +{ + u8 regval = *confdata; + int err; + + if (enable) + regval |= BIT(channel); + else + regval &= ~BIT(channel); + + if (regval != *confdata) { + err = i2c_smbus_write_byte_data(client, reg, regval); + if (err) + return err; + *confdata = regval; + } + return 0; +} + +static int max31730_set_offset_enable(struct max31730_data *data, int channel, + bool enable) +{ + return max31730_set_enable(data->client, MAX31730_REG_OFFSET_ENABLE, + &data->offset_enable, channel, enable); +} + +static int max31730_set_channel_enable(struct max31730_data *data, int channel, + bool enable) +{ + return max31730_set_enable(data->client, MAX31730_REG_CHANNEL_ENABLE, + &data->channel_enable, channel, enable); +} + +static int max31730_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct max31730_data *data = dev_get_drvdata(dev); + int regval, reg, offset; + + if (type != hwmon_temp) + return -EINVAL; + + switch (attr) { + case hwmon_temp_input: + if (!(data->channel_enable & BIT(channel))) + return -ENODATA; + reg = MAX31730_REG_TEMP + (channel * 2); + break; + case hwmon_temp_max: + reg = MAX31730_REG_TEMP_MAX + (channel * 2); + break; + case hwmon_temp_min: + reg = MAX31730_REG_TEMP_MIN; + break; + case hwmon_temp_enable: + *val = !!(data->channel_enable & BIT(channel)); + return 0; + case hwmon_temp_offset: + if (!channel) + return -EINVAL; + if (!(data->offset_enable & BIT(channel))) { + *val = 0; + return 0; + } + offset = i2c_smbus_read_byte_data(data->client, + MAX31730_REG_TEMP_OFFSET); + if (offset < 0) + return offset; + *val = (offset - MAX31730_TEMP_OFFSET_BASELINE) * 125; + return 0; + case hwmon_temp_fault: + regval = i2c_smbus_read_byte_data(data->client, + MAX31730_REG_TEMP_FAULT); + if (regval < 0) + return regval; + *val = !!(regval & BIT(channel)); + return 0; + case hwmon_temp_min_alarm: + regval = i2c_smbus_read_byte_data(data->client, + MAX31730_REG_STATUS_LOW); + if (regval < 0) + return regval; + *val = !!(regval & BIT(channel)); + return 0; + case hwmon_temp_max_alarm: + regval = i2c_smbus_read_byte_data(data->client, + MAX31730_REG_STATUS_HIGH); + if (regval < 0) + return regval; + *val = !!(regval & BIT(channel)); + return 0; + default: + return -EINVAL; + } + regval = i2c_smbus_read_word_swapped(data->client, reg); + if (regval < 0) + return regval; + + *val = max31730_reg_to_mc(regval); + + return 0; +} + +static int max31730_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct max31730_data *data = dev_get_drvdata(dev); + int reg, err; + + if (type != hwmon_temp) + return -EINVAL; + + switch (attr) { + case hwmon_temp_max: + reg = MAX31730_REG_TEMP_MAX + channel * 2; + break; + case hwmon_temp_min: + reg = MAX31730_REG_TEMP_MIN; + break; + case hwmon_temp_enable: + if (val != 0 && val != 1) + return -EINVAL; + return max31730_set_channel_enable(data, channel, val); + case hwmon_temp_offset: + val = clamp_val(val, -14875, 17000) + 14875; + val = DIV_ROUND_CLOSEST(val, 125); + err = max31730_set_offset_enable(data, channel, + val != MAX31730_TEMP_OFFSET_BASELINE); + if (err) + return err; + return i2c_smbus_write_byte_data(data->client, + MAX31730_REG_TEMP_OFFSET, val); + default: + return -EINVAL; + } + + val = clamp_val(val, MAX31730_TEMP_MIN, MAX31730_TEMP_MAX); + val = DIV_ROUND_CLOSEST(val << 4, 1000) << 4; + + return i2c_smbus_write_word_swapped(data->client, reg, (u16)val); +} + +static umode_t max31730_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_fault: + return 0444; + case hwmon_temp_min: + return channel ? 0444 : 0644; + case hwmon_temp_offset: + case hwmon_temp_enable: + case hwmon_temp_max: + return 0644; + } + break; + default: + break; + } + return 0; +} + +static const struct hwmon_channel_info *max31730_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_ENABLE | + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_OFFSET | HWMON_T_ENABLE | + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | + HWMON_T_FAULT, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_OFFSET | HWMON_T_ENABLE | + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | + HWMON_T_FAULT, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_OFFSET | HWMON_T_ENABLE | + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | + HWMON_T_FAULT + ), + NULL +}; + +static const struct hwmon_ops max31730_hwmon_ops = { + .is_visible = max31730_is_visible, + .read = max31730_read, + .write = max31730_write, +}; + +static const struct hwmon_chip_info max31730_chip_info = { + .ops = &max31730_hwmon_ops, + .info = max31730_info, +}; + +static void max31730_remove(void *data) +{ + struct max31730_data *max31730 = data; + struct i2c_client *client = max31730->client; + + i2c_smbus_write_byte_data(client, MAX31730_REG_CONF, + max31730->orig_conf); +} + +static int +max31730_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct max31730_data *data; + int status, err; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -EIO; + + data = devm_kzalloc(dev, sizeof(struct max31730_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + + /* Cache original configuration and enable status */ + status = i2c_smbus_read_byte_data(client, MAX31730_REG_CHANNEL_ENABLE); + if (status < 0) + return status; + data->channel_enable = status; + + status = i2c_smbus_read_byte_data(client, MAX31730_REG_OFFSET_ENABLE); + if (status < 0) + return status; + data->offset_enable = status; + + status = i2c_smbus_read_byte_data(client, MAX31730_REG_CONF); + if (status < 0) + return status; + data->orig_conf = status; + data->current_conf = status; + + err = max31730_write_config(data, + data->channel_enable ? 0 : MAX31730_STOP, + data->channel_enable ? MAX31730_STOP : 0); + if (err) + return err; + + dev_set_drvdata(dev, data); + + err = devm_add_action_or_reset(dev, max31730_remove, data); + if (err) + return err; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, + &max31730_chip_info, + NULL); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id max31730_ids[] = { + { "max31730", 0, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max31730_ids); + +static const struct of_device_id __maybe_unused max31730_of_match[] = { + { + .compatible = "maxim,max31730", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, max31730_of_match); + +static bool max31730_check_reg_temp(struct i2c_client *client, + int reg) +{ + int regval; + + regval = i2c_smbus_read_byte_data(client, reg + 1); + return regval < 0 || (regval & 0x0f); +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max31730_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int regval; + int i; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_ID); + if (regval != MAX31730_MFG_ID) + return -ENODEV; + regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_REV); + if (regval != MAX31730_MFG_REV) + return -ENODEV; + + /* lower 4 bit of temperature and limit registers must be 0 */ + if (max31730_check_reg_temp(client, MAX31730_REG_TEMP_MIN)) + return -ENODEV; + + for (i = 0; i < 4; i++) { + if (max31730_check_reg_temp(client, MAX31730_REG_TEMP + i * 2)) + return -ENODEV; + if (max31730_check_reg_temp(client, + MAX31730_REG_TEMP_MAX + i * 2)) + return -ENODEV; + } + + strscpy(info->type, "max31730", I2C_NAME_SIZE); + + return 0; +} + +static int max31730_suspend(struct device *dev) +{ + struct max31730_data *data = dev_get_drvdata(dev); + + return max31730_write_config(data, MAX31730_STOP, 0); +} + +static int max31730_resume(struct device *dev) +{ + struct max31730_data *data = dev_get_drvdata(dev); + + return max31730_write_config(data, 0, MAX31730_STOP); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(max31730_pm_ops, max31730_suspend, max31730_resume); + +static struct i2c_driver max31730_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "max31730", + .of_match_table = of_match_ptr(max31730_of_match), + .pm = pm_sleep_ptr(&max31730_pm_ops), + }, + .probe_new = max31730_probe, + .id_table = max31730_ids, + .detect = max31730_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(max31730_driver); + +MODULE_AUTHOR("Guenter Roeck "); +MODULE_DESCRIPTION("MAX31730 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3