From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/pmbus/Kconfig | 464 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 464 insertions(+) create mode 100644 drivers/hwmon/pmbus/Kconfig (limited to 'drivers/hwmon/pmbus/Kconfig') diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig new file mode 100644 index 000000000..89668af67 --- /dev/null +++ b/drivers/hwmon/pmbus/Kconfig @@ -0,0 +1,464 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# PMBus chip drivers configuration +# + +menuconfig PMBUS + tristate "PMBus support" + depends on I2C + help + Say yes here if you want to enable PMBus support. + + This driver can also be built as a module. If so, the module will + be called pmbus_core. + +if PMBUS + +config SENSORS_PMBUS + tristate "Generic PMBus devices" + default y + help + If you say yes here you get hardware monitoring support for generic + PMBus devices, including but not limited to ADP4000, BMR310, BMR453, + BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492, + MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, + TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020. + + This driver can also be built as a module. If so, the module will + be called pmbus. + +config SENSORS_ADM1266 + tristate "Analog Devices ADM1266 Sequencer" + select CRC8 + depends on GPIOLIB + help + If you say yes here you get hardware monitoring support for Analog + Devices ADM1266 Cascadable Super Sequencer. + + This driver can also be built as a module. If so, the module will + be called adm1266. + +config SENSORS_ADM1275 + tristate "Analog Devices ADM1275 and compatibles" + help + If you say yes here you get hardware monitoring support for Analog + Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, + and ADM1294 Hot-Swap Controller and Digital Power Monitors. + + This driver can also be built as a module. If so, the module will + be called adm1275. + +config SENSORS_BEL_PFE + tristate "Bel PFE Compatible Power Supplies" + help + If you say yes here you get hardware monitoring support for BEL + PFE1100 and PFE3000 Power Supplies. + + This driver can also be built as a module. If so, the module will + be called bel-pfe. + +config SENSORS_BPA_RS600 + tristate "BluTek BPA-RS600 Power Supplies" + help + If you say yes here you get hardware monitoring support for BluTek + BPA-RS600 Power Supplies. + + This driver can also be built as a module. If so, the module will + be called bpa-rs600. + +config SENSORS_DELTA_AHE50DC_FAN + tristate "Delta AHE-50DC fan control module" + help + If you say yes here you get hardware monitoring support for + the integrated fan control module of the Delta AHE-50DC + Open19 power shelf. + + This driver can also be built as a module. If so, the module + will be called delta-ahe50dc-fan. + +config SENSORS_FSP_3Y + tristate "FSP/3Y-Power power supplies" + help + If you say yes here you get hardware monitoring support for + FSP/3Y-Power hot-swap power supplies. + Supported models: YH-5151E, YM-2151E + + This driver can also be built as a module. If so, the module will + be called fsp-3y. + +config SENSORS_IBM_CFFPS + tristate "IBM Common Form Factor Power Supply" + depends on LEDS_CLASS + help + If you say yes here you get hardware monitoring support for the IBM + Common Form Factor power supply. + + This driver can also be built as a module. If so, the module will + be called ibm-cffps. + +config SENSORS_DPS920AB + tristate "Delta DPS920AB Power Supply" + help + If you say yes here you get hardware monitoring support for Delta + DPS920AB Power Supplies. + + This driver can also be built as a module. If so, the module will + be called dps920ab. + +config SENSORS_INSPUR_IPSPS + tristate "INSPUR Power System Power Supply" + help + If you say yes here you get hardware monitoring support for the INSPUR + Power System power supply. + + This driver can also be built as a module. If so, the module will + be called inspur-ipsps. + +config SENSORS_IR35221 + tristate "Infineon IR35221" + help + If you say yes here you get hardware monitoring support for the + Infineon IR35221 controller. + + This driver can also be built as a module. If so, the module will + be called ir35221. + +config SENSORS_IR36021 + tristate "Infineon IR36021" + help + If you say yes here you get hardware monitoring support for Infineon + IR36021. + + This driver can also be built as a module. If so, the module will + be called ir36021. + +config SENSORS_IR38064 + tristate "Infineon IR38064 and compatibles" + help + If you say yes here you get hardware monitoring support for Infineon + IR38060, IR38064, IR38164 and IR38263. + + This driver can also be built as a module. If so, the module will + be called ir38064. + +config SENSORS_IR38064_REGULATOR + bool "Regulator support for IR38064 and compatibles" + depends on SENSORS_IR38064 && REGULATOR + help + Uses the IR38064 or compatible as regulator. + +config SENSORS_IRPS5401 + tristate "Infineon IRPS5401" + help + If you say yes here you get hardware monitoring support for the + Infineon IRPS5401 controller. + + This driver can also be built as a module. If so, the module will + be called irps5401. + +config SENSORS_ISL68137 + tristate "Renesas Digital Multiphase Voltage Regulators" + help + If you say yes here you get hardware monitoring support for Renesas + digital multiphase voltage regulators. + + This driver can also be built as a module. If so, the module will + be called isl68137. + +config SENSORS_LM25066 + tristate "National Semiconductor LM25066 and compatibles" + help + If you say yes here you get hardware monitoring support for National + Semiconductor LM25056, LM25066, LM5064, and LM5066. + + This driver can also be built as a module. If so, the module will + be called lm25066. + +config SENSORS_LM25066_REGULATOR + bool "Regulator support for LM25066 and compatibles" + depends on SENSORS_LM25066 && REGULATOR + help + If you say yes here you get regulator support for National + Semiconductor LM25066, LM5064, and LM5066. + +config SENSORS_LT7182S + tristate "Analog Devices LT7182S" + help + If you say yes here you get hardware monitoring support for Analog + Devices LT7182S. + + This driver can also be built as a module. If so, the module will + be called lt7182s. + +config SENSORS_LTC2978 + tristate "Linear Technologies LTC2978 and compatibles" + help + If you say yes here you get hardware monitoring support for Linear + Technology LTC2972, LTC2974, LTC2975, LTC2977, LTC2978, LTC2979, + LTC2980, and LTM2987. + + This driver can also be built as a module. If so, the module will + be called ltc2978. + +config SENSORS_LTC2978_REGULATOR + bool "Regulator support for LTC2978 and compatibles" + depends on SENSORS_LTC2978 && REGULATOR + help + If you say yes here you get regulator support for Linear Technology + LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7880, + LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680, LTM4686, + and LTM4700. + +config SENSORS_LTC3815 + tristate "Linear Technologies LTC3815" + help + If you say yes here you get hardware monitoring support for Linear + Technology LTC3815. + + This driver can also be built as a module. If so, the module will + be called ltc3815. + +config SENSORS_MAX15301 + tristate "Maxim MAX15301" + help + If you say yes here you get hardware monitoring support for Maxim + MAX15301, as well as for Flex BMR461. + + This driver can also be built as a module. If so, the module will + be called max15301. + +config SENSORS_MAX16064 + tristate "Maxim MAX16064" + help + If you say yes here you get hardware monitoring support for Maxim + MAX16064. + + This driver can also be built as a module. If so, the module will + be called max16064. + +config SENSORS_MAX16601 + tristate "Maxim MAX16508, MAX16601, MAX16602" + help + If you say yes here you get hardware monitoring support for Maxim + MAX16508, MAX16601 and MAX16602. + + This driver can also be built as a module. If so, the module will + be called max16601. + +config SENSORS_MAX20730 + tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743" + help + If you say yes here you get hardware monitoring support for Maxim + MAX20710, MAX20730, MAX20734, and MAX20743. + + This driver can also be built as a module. If so, the module will + be called max20730. + +config SENSORS_MAX20751 + tristate "Maxim MAX20751" + help + If you say yes here you get hardware monitoring support for Maxim + MAX20751. + + This driver can also be built as a module. If so, the module will + be called max20751. + +config SENSORS_MAX31785 + tristate "Maxim MAX31785 and compatibles" + help + If you say yes here you get hardware monitoring support for Maxim + MAX31785. + + This driver can also be built as a module. If so, the module will + be called max31785. + +config SENSORS_MAX34440 + tristate "Maxim MAX34440 and compatibles" + help + If you say yes here you get hardware monitoring support for Maxim + MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461. + + This driver can also be built as a module. If so, the module will + be called max34440. + +config SENSORS_MAX8688 + tristate "Maxim MAX8688" + help + If you say yes here you get hardware monitoring support for Maxim + MAX8688. + + This driver can also be built as a module. If so, the module will + be called max8688. + +config SENSORS_MP2888 + tristate "MPS MP2888" + help + If you say yes here you get hardware monitoring support for MPS + MP2888 Digital, Multi-Phase, Pulse-Width Modulation Controller. + + This driver can also be built as a module. If so, the module will + be called mp2888. + +config SENSORS_MP2975 + tristate "MPS MP2975" + help + If you say yes here you get hardware monitoring support for MPS + MP2975 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2975. + +config SENSORS_MP5023 + tristate "MPS MP5023" + help + If you say yes here you get hardware monitoring support for MPS + MP5023. + + This driver can also be built as a module. If so, the module will + be called mp5023. + +config SENSORS_PIM4328 + tristate "Flex PIM4328 and compatibles" + help + If you say yes here you get hardware monitoring support for Flex + PIM4328, PIM4820 and PIM4006 Power Interface Modules. + + This driver can also be built as a module. If so, the module will + be called pim4328. + +config SENSORS_PLI1209BC + tristate "Vicor PLI1209BC" + help + If you say yes here you get hardware monitoring support for Vicor + PLI1209BC Digital Supervisor. + + This driver can also be built as a module. If so, the module will + be called pli1209bc. + +config SENSORS_PLI1209BC_REGULATOR + bool "Regulator support for PLI1209BC" + depends on SENSORS_PLI1209BC && REGULATOR + help + If you say yes here you get regulator support for Vicor PLI1209BC + Digital Supervisor. + +config SENSORS_PM6764TR + tristate "ST PM6764TR" + help + If you say yes here you get hardware monitoring support for ST + PM6764TR. + + This driver can also be built as a module. If so, the module will + be called pm6764tr. + +config SENSORS_PXE1610 + tristate "Infineon PXE1610" + help + If you say yes here you get hardware monitoring support for Infineon + PXE1610. + + This driver can also be built as a module. If so, the module will + be called pxe1610. + +config SENSORS_Q54SJ108A2 + tristate "Delta Power Supplies Q54SJ108A2" + help + If you say yes here you get hardware monitoring support for Delta + Q54SJ108A2 series Power Supplies. + + This driver can also be built as a module. If so, the module will + be called q54sj108a2. + +config SENSORS_STPDDC60 + tristate "ST STPDDC60" + help + If you say yes here you get hardware monitoring support for ST + STPDDC60 Universal Digital Multicell Controller, as well as for + Flex BMR481. + + This driver can also be built as a module. If so, the module will + be called stpddc60. + +config SENSORS_TPS40422 + tristate "TI TPS40422" + help + If you say yes here you get hardware monitoring support for TI + TPS40422. + + This driver can also be built as a module. If so, the module will + be called tps40422. + +config SENSORS_TPS53679 + tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688" + help + If you say yes here you get hardware monitoring support for TI + TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688. + + This driver can also be built as a module. If so, the module will + be called tps53679. + +config SENSORS_TPS546D24 + tristate "TPS546D24" + help + If you say yes here you get hardware monitoring support for TEXAS + TPS546D24. + + This driver can also be built as a module. If so, the module will + be called tps546d24 + +config SENSORS_UCD9000 + tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910" + help + If you say yes here you get hardware monitoring support for TI + UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer + and System Health Controllers. + + This driver can also be built as a module. If so, the module will + be called ucd9000. + +config SENSORS_UCD9200 + tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" + help + If you say yes here you get hardware monitoring support for TI + UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 + Digital PWM System Controllers. + + This driver can also be built as a module. If so, the module will + be called ucd9200. + +config SENSORS_XDPE152 + tristate "Infineon XDPE152 family" + help + If you say yes here you get hardware monitoring support for Infineon + XDPE15284, XDPE152C4, device. + + This driver can also be built as a module. If so, the module will + be called xdpe152c4. + +config SENSORS_XDPE122 + tristate "Infineon XDPE122 family" + help + If you say yes here you get hardware monitoring support for Infineon + XDPE12254, XDPE12284, device. + + This driver can also be built as a module. If so, the module will + be called xdpe12284. + +config SENSORS_XDPE122_REGULATOR + bool "Regulator support for XDPE122 and compatibles" + depends on SENSORS_XDPE122 && REGULATOR + help + Uses the xdpe12284 or compatible as regulator. + +config SENSORS_ZL6100 + tristate "Intersil ZL6100 and compatibles" + help + If you say yes here you get hardware monitoring support for Intersil + ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105, + ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for + Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464. + + This driver can also be built as a module. If so, the module will + be called zl6100. + +endif # PMBUS -- cgit v1.2.3