From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwmon/shtc1.c | 290 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 290 insertions(+) create mode 100644 drivers/hwmon/shtc1.c (limited to 'drivers/hwmon/shtc1.c') diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c new file mode 100644 index 000000000..18546ebc8 --- /dev/null +++ b/drivers/hwmon/shtc1.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* Sensirion SHTC1 humidity and temperature sensor driver + * + * Copyright (C) 2014 Sensirion AG, Switzerland + * Author: Johannes Winkelmann + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* commands (high precision mode) */ +static const unsigned char shtc1_cmd_measure_blocking_hpm[] = { 0x7C, 0xA2 }; +static const unsigned char shtc1_cmd_measure_nonblocking_hpm[] = { 0x78, 0x66 }; + +/* commands (low precision mode) */ +static const unsigned char shtc1_cmd_measure_blocking_lpm[] = { 0x64, 0x58 }; +static const unsigned char shtc1_cmd_measure_nonblocking_lpm[] = { 0x60, 0x9c }; + +/* command for reading the ID register */ +static const unsigned char shtc1_cmd_read_id_reg[] = { 0xef, 0xc8 }; + +/* + * constants for reading the ID register + * SHTC1: 0x0007 with mask 0x003f + * SHTW1: 0x0007 with mask 0x003f + * SHTC3: 0x0807 with mask 0x083f + */ +#define SHTC3_ID 0x0807 +#define SHTC3_ID_MASK 0x083f +#define SHTC1_ID 0x0007 +#define SHTC1_ID_MASK 0x003f + +/* delays for non-blocking i2c commands, both in us */ +#define SHTC1_NONBLOCKING_WAIT_TIME_HPM 14400 +#define SHTC1_NONBLOCKING_WAIT_TIME_LPM 1000 +#define SHTC3_NONBLOCKING_WAIT_TIME_HPM 12100 +#define SHTC3_NONBLOCKING_WAIT_TIME_LPM 800 + +#define SHTC1_CMD_LENGTH 2 +#define SHTC1_RESPONSE_LENGTH 6 + +enum shtcx_chips { + shtc1, + shtc3, +}; + +struct shtc1_data { + struct i2c_client *client; + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + const unsigned char *command; + unsigned int nonblocking_wait_time; /* in us */ + + struct shtc1_platform_data setup; + enum shtcx_chips chip; + + int temperature; /* 1000 * temperature in dgr C */ + int humidity; /* 1000 * relative humidity in %RH */ +}; + +static int shtc1_update_values(struct i2c_client *client, + struct shtc1_data *data, + char *buf, int bufsize) +{ + int ret = i2c_master_send(client, data->command, SHTC1_CMD_LENGTH); + if (ret != SHTC1_CMD_LENGTH) { + dev_err(&client->dev, "failed to send command: %d\n", ret); + return ret < 0 ? ret : -EIO; + } + + /* + * In blocking mode (clock stretching mode) the I2C bus + * is blocked for other traffic, thus the call to i2c_master_recv() + * will wait until the data is ready. For non blocking mode, we + * have to wait ourselves. + */ + if (!data->setup.blocking_io) + usleep_range(data->nonblocking_wait_time, + data->nonblocking_wait_time + 1000); + + ret = i2c_master_recv(client, buf, bufsize); + if (ret != bufsize) { + dev_err(&client->dev, "failed to read values: %d\n", ret); + return ret < 0 ? ret : -EIO; + } + + return 0; +} + +/* sysfs attributes */ +static struct shtc1_data *shtc1_update_client(struct device *dev) +{ + struct shtc1_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned char buf[SHTC1_RESPONSE_LENGTH]; + int val; + int ret = 0; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ / 10) || !data->valid) { + ret = shtc1_update_values(client, data, buf, sizeof(buf)); + if (ret) + goto out; + + /* + * From datasheet: + * T = -45 + 175 * ST / 2^16 + * RH = 100 * SRH / 2^16 + * + * Adapted for integer fixed point (3 digit) arithmetic. + */ + val = be16_to_cpup((__be16 *)buf); + data->temperature = ((21875 * val) >> 13) - 45000; + val = be16_to_cpup((__be16 *)(buf + 3)); + data->humidity = ((12500 * val) >> 13); + + data->last_updated = jiffies; + data->valid = true; + } + +out: + mutex_unlock(&data->update_lock); + + return ret == 0 ? data : ERR_PTR(ret); +} + +static ssize_t temp1_input_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct shtc1_data *data = shtc1_update_client(dev); + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", data->temperature); +} + +static ssize_t humidity1_input_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct shtc1_data *data = shtc1_update_client(dev); + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", data->humidity); +} + +static DEVICE_ATTR_RO(temp1_input); +static DEVICE_ATTR_RO(humidity1_input); + +static struct attribute *shtc1_attrs[] = { + &dev_attr_temp1_input.attr, + &dev_attr_humidity1_input.attr, + NULL +}; + +ATTRIBUTE_GROUPS(shtc1); + +static void shtc1_select_command(struct shtc1_data *data) +{ + if (data->setup.high_precision) { + data->command = data->setup.blocking_io ? + shtc1_cmd_measure_blocking_hpm : + shtc1_cmd_measure_nonblocking_hpm; + data->nonblocking_wait_time = (data->chip == shtc1) ? + SHTC1_NONBLOCKING_WAIT_TIME_HPM : + SHTC3_NONBLOCKING_WAIT_TIME_HPM; + } else { + data->command = data->setup.blocking_io ? + shtc1_cmd_measure_blocking_lpm : + shtc1_cmd_measure_nonblocking_lpm; + data->nonblocking_wait_time = (data->chip == shtc1) ? + SHTC1_NONBLOCKING_WAIT_TIME_LPM : + SHTC3_NONBLOCKING_WAIT_TIME_LPM; + } +} + +static const struct i2c_device_id shtc1_id[]; + +static int shtc1_probe(struct i2c_client *client) +{ + int ret; + u16 id_reg; + char id_reg_buf[2]; + struct shtc1_data *data; + struct device *hwmon_dev; + enum shtcx_chips chip = i2c_match_id(shtc1_id, client)->driver_data; + struct i2c_adapter *adap = client->adapter; + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + + if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) { + dev_err(dev, "plain i2c transactions not supported\n"); + return -ENODEV; + } + + ret = i2c_master_send(client, shtc1_cmd_read_id_reg, SHTC1_CMD_LENGTH); + if (ret != SHTC1_CMD_LENGTH) { + dev_err(dev, "could not send read_id_reg command: %d\n", ret); + return ret < 0 ? ret : -ENODEV; + } + ret = i2c_master_recv(client, id_reg_buf, sizeof(id_reg_buf)); + if (ret != sizeof(id_reg_buf)) { + dev_err(dev, "could not read ID register: %d\n", ret); + return -ENODEV; + } + + id_reg = be16_to_cpup((__be16 *)id_reg_buf); + if (chip == shtc3) { + if ((id_reg & SHTC3_ID_MASK) != SHTC3_ID) { + dev_err(dev, "SHTC3 ID register does not match\n"); + return -ENODEV; + } + } else if ((id_reg & SHTC1_ID_MASK) != SHTC1_ID) { + dev_err(dev, "SHTC1 ID register does not match\n"); + return -ENODEV; + } + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->setup.blocking_io = false; + data->setup.high_precision = true; + data->client = client; + data->chip = chip; + + if (np) { + data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking-io"); + data->setup.high_precision = !of_property_read_bool(np, "sensicon,low-precision"); + } else { + if (client->dev.platform_data) + data->setup = *(struct shtc1_platform_data *)dev->platform_data; + } + + shtc1_select_command(data); + mutex_init(&data->update_lock); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, + client->name, + data, + shtc1_groups); + if (IS_ERR(hwmon_dev)) + dev_dbg(dev, "unable to register hwmon device\n"); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +/* device ID table */ +static const struct i2c_device_id shtc1_id[] = { + { "shtc1", shtc1 }, + { "shtw1", shtc1 }, + { "shtc3", shtc3 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, shtc1_id); + +static const struct of_device_id shtc1_of_match[] = { + { .compatible = "sensirion,shtc1" }, + { .compatible = "sensirion,shtw1" }, + { .compatible = "sensirion,shtc3" }, + { } +}; +MODULE_DEVICE_TABLE(of, shtc1_of_match); + +static struct i2c_driver shtc1_i2c_driver = { + .driver = { + .name = "shtc1", + .of_match_table = shtc1_of_match, + }, + .probe_new = shtc1_probe, + .id_table = shtc1_id, +}; + +module_i2c_driver(shtc1_i2c_driver); + +MODULE_AUTHOR("Johannes Winkelmann "); +MODULE_DESCRIPTION("Sensirion SHTC1 humidity and temperature sensor driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3