From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/hwtracing/coresight/coresight-config.h | 262 +++++++++++++++++++++++++ 1 file changed, 262 insertions(+) create mode 100644 drivers/hwtracing/coresight/coresight-config.h (limited to 'drivers/hwtracing/coresight/coresight-config.h') diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h new file mode 100644 index 000000000..6ba013975 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-config.h @@ -0,0 +1,262 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Linaro Limited, All rights reserved. + * Author: Mike Leach + */ + +#ifndef _CORESIGHT_CORESIGHT_CONFIG_H +#define _CORESIGHT_CORESIGHT_CONFIG_H + +#include +#include + +/* CoreSight Configuration Management - component and system wide configuration */ + +/* + * Register type flags for register value descriptor: + * describe how the value is interpreted, and handled. + */ +#define CS_CFG_REG_TYPE_STD 0x80 /* reg is standard reg */ +#define CS_CFG_REG_TYPE_RESOURCE 0x40 /* reg is a resource */ +#define CS_CFG_REG_TYPE_VAL_PARAM 0x08 /* reg value uses param */ +#define CS_CFG_REG_TYPE_VAL_MASK 0x04 /* reg value bit masked */ +#define CS_CFG_REG_TYPE_VAL_64BIT 0x02 /* reg value 64 bit */ +#define CS_CFG_REG_TYPE_VAL_SAVE 0x01 /* reg value save on disable */ + +/* + * flags defining what device class a feature will match to when processing a + * system configuration - used by config data and devices. + */ +#define CS_CFG_MATCH_CLASS_SRC_ALL 0x0001 /* match any source */ +#define CS_CFG_MATCH_CLASS_SRC_ETM4 0x0002 /* match any ETMv4 device */ + +/* flags defining device instance matching - used in config match desc data. */ +#define CS_CFG_MATCH_INST_ANY 0x80000000 /* any instance of a class */ + +/* + * Limit number of presets in a configuration + * This is related to the number of bits (4) we use to select the preset on + * the perf command line. Preset 0 is always none selected. + * See PMU_FORMAT_ATTR(preset, "config:0-3") in coresight-etm-perf.c + */ +#define CS_CFG_CONFIG_PRESET_MAX 15 + +/** + * Parameter descriptor for a device feature. + * + * @name: Name of parameter. + * @value: Initial or default value. + */ +struct cscfg_parameter_desc { + const char *name; + u64 value; +}; + +/** + * Representation of register value and a descriptor of register usage. + * + * Used as a descriptor in the feature descriptors. + * Used as a value in when in a feature loading into a csdev. + * + * Supports full 64 bit register value, or 32 bit value with optional mask + * value. + * + * @type: define register usage and interpretation. + * @offset: the address offset for register in the hardware device (per device specification). + * @hw_info: optional hardware device type specific information. (ETM / CTI specific etc) + * @val64: 64 bit value. + * @val32: 32 bit value. + * @mask32: 32 bit mask when using 32 bit value to access device register - if mask type. + * @param_idx: parameter index value into parameter array if param type. + */ +struct cscfg_regval_desc { + struct { + u32 type:8; + u32 offset:12; + u32 hw_info:12; + }; + union { + u64 val64; + struct { + u32 val32; + u32 mask32; + }; + u32 param_idx; + }; +}; + +/** + * Device feature descriptor - combination of registers and parameters to + * program a device to implement a specific complex function. + * + * @name: feature name. + * @description: brief description of the feature. + * @item: List entry. + * @match_flags: matching information if loading into a device + * @nr_params: number of parameters used. + * @params_desc: array of parameters used. + * @nr_regs: number of registers used. + * @regs_desc: array of registers used. + * @load_owner: handle to load owner for dynamic load and unload of features. + * @fs_group: reference to configfs group for dynamic unload. + */ +struct cscfg_feature_desc { + const char *name; + const char *description; + struct list_head item; + u32 match_flags; + int nr_params; + struct cscfg_parameter_desc *params_desc; + int nr_regs; + struct cscfg_regval_desc *regs_desc; + void *load_owner; + struct config_group *fs_group; +}; + +/** + * Configuration descriptor - describes selectable system configuration. + * + * A configuration describes device features in use, and may provide preset + * values for the parameters in those features. + * + * A single set of presets is the sum of the parameters declared by + * all the features in use - this value is @nr_total_params. + * + * @name: name of the configuration - used for selection. + * @description: description of the purpose of the configuration. + * @item: list entry. + * @nr_feat_refs: Number of features used in this configuration. + * @feat_ref_names: references to features used in this configuration. + * @nr_presets: Number of sets of presets supplied by this configuration. + * @nr_total_params: Sum of all parameters declared by used features + * @presets: Array of preset values. + * @event_ea: Extended attribute for perf event value + * @active_cnt: ref count for activate on this configuration. + * @load_owner: handle to load owner for dynamic load and unload of configs. + * @fs_group: reference to configfs group for dynamic unload. + * @available: config can be activated - multi-stage load sets true on completion. + */ +struct cscfg_config_desc { + const char *name; + const char *description; + struct list_head item; + int nr_feat_refs; + const char **feat_ref_names; + int nr_presets; + int nr_total_params; + const u64 *presets; /* nr_presets * nr_total_params */ + struct dev_ext_attribute *event_ea; + atomic_t active_cnt; + void *load_owner; + struct config_group *fs_group; + bool available; +}; + +/** + * config register instance - part of a loaded feature. + * maps register values to csdev driver structures + * + * @reg_desc: value to use when setting feature on device / store for + * readback of volatile values. + * @driver_regval: pointer to internal driver element used to set the value + * in hardware. + */ +struct cscfg_regval_csdev { + struct cscfg_regval_desc reg_desc; + void *driver_regval; +}; + +/** + * config parameter instance - part of a loaded feature. + * + * @feat_csdev: parent feature + * @reg_csdev: register value updated by this parameter. + * @current_value: current value of parameter - may be set by user via + * sysfs, or modified during device operation. + * @val64: true if 64 bit value + */ +struct cscfg_parameter_csdev { + struct cscfg_feature_csdev *feat_csdev; + struct cscfg_regval_csdev *reg_csdev; + u64 current_value; + bool val64; +}; + +/** + * Feature instance loaded into a CoreSight device. + * + * When a feature is loaded into a specific device, then this structure holds + * the connections between the register / parameter values used and the + * internal data structures that are written when the feature is enabled. + * + * Since applying a feature modifies internal data structures in the device, + * then we have a reference to the device spinlock to protect access to these + * structures (@drv_spinlock). + * + * @feat_desc: pointer to the static descriptor for this feature. + * @csdev: parent CoreSight device instance. + * @node: list entry into feature list for this device. + * @drv_spinlock: device spinlock for access to driver register data. + * @nr_params: number of parameters. + * @params_csdev: current parameter values on this device + * @nr_regs: number of registers to be programmed. + * @regs_csdev: Programming details for the registers + */ +struct cscfg_feature_csdev { + const struct cscfg_feature_desc *feat_desc; + struct coresight_device *csdev; + struct list_head node; + spinlock_t *drv_spinlock; + int nr_params; + struct cscfg_parameter_csdev *params_csdev; + int nr_regs; + struct cscfg_regval_csdev *regs_csdev; +}; + +/** + * Configuration instance when loaded into a CoreSight device. + * + * The instance contains references to loaded features on this device that are + * used by the configuration. + * + * @config_desc:reference to the descriptor for this configuration + * @csdev: parent coresight device for this configuration instance. + * @enabled: true if configuration is enabled on this device. + * @node: list entry within the coresight device + * @nr_feat: Number of features on this device that are used in the + * configuration. + * @feats_csdev:references to the device features to enable. + */ +struct cscfg_config_csdev { + const struct cscfg_config_desc *config_desc; + struct coresight_device *csdev; + bool enabled; + struct list_head node; + int nr_feat; + struct cscfg_feature_csdev *feats_csdev[]; +}; + +/** + * Coresight device operations. + * + * Registered coresight devices provide these operations to manage feature + * instances compatible with the device hardware and drivers + * + * @load_feat: Pass a feature descriptor into the device and create the + * loaded feature instance (struct cscfg_feature_csdev). + */ +struct cscfg_csdev_feat_ops { + int (*load_feat)(struct coresight_device *csdev, + struct cscfg_feature_csdev *feat_csdev); +}; + +/* coresight config helper functions*/ + +/* enable / disable config on a device - called with appropriate locks set.*/ +int cscfg_csdev_enable_config(struct cscfg_config_csdev *config_csdev, int preset); +void cscfg_csdev_disable_config(struct cscfg_config_csdev *config_csdev); + +/* reset a feature to default values */ +void cscfg_reset_feat(struct cscfg_feature_csdev *feat_csdev); + +#endif /* _CORESIGHT_CORESIGHT_CONFIG_H */ -- cgit v1.2.3