From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/i2c/busses/i2c-amd-mp2.h | 214 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 214 insertions(+) create mode 100644 drivers/i2c/busses/i2c-amd-mp2.h (limited to 'drivers/i2c/busses/i2c-amd-mp2.h') diff --git a/drivers/i2c/busses/i2c-amd-mp2.h b/drivers/i2c/busses/i2c-amd-mp2.h new file mode 100644 index 000000000..018a42de8 --- /dev/null +++ b/drivers/i2c/busses/i2c-amd-mp2.h @@ -0,0 +1,214 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * AMD MP2 I2C adapter driver + * + * Authors: Shyam Sundar S K + * Elie Morisse + */ + +#ifndef I2C_AMD_PCI_MP2_H +#define I2C_AMD_PCI_MP2_H + +#include +#include +#include + +#define PCI_DEVICE_ID_AMD_MP2 0x15E6 + +struct amd_i2c_common; +struct amd_mp2_dev; + +enum { + /* MP2 C2P Message Registers */ + AMD_C2P_MSG0 = 0x10500, /* MP2 Message for I2C0 */ + AMD_C2P_MSG1 = 0x10504, /* MP2 Message for I2C1 */ + AMD_C2P_MSG2 = 0x10508, /* DRAM Address Lo / Data 0 */ + AMD_C2P_MSG3 = 0x1050c, /* DRAM Address HI / Data 1 */ + AMD_C2P_MSG4 = 0x10510, /* Data 2 */ + AMD_C2P_MSG5 = 0x10514, /* Data 3 */ + AMD_C2P_MSG6 = 0x10518, /* Data 4 */ + AMD_C2P_MSG7 = 0x1051c, /* Data 5 */ + AMD_C2P_MSG8 = 0x10520, /* Data 6 */ + AMD_C2P_MSG9 = 0x10524, /* Data 7 */ + + /* MP2 P2C Message Registers */ + AMD_P2C_MSG0 = 0x10680, /* Do not use */ + AMD_P2C_MSG1 = 0x10684, /* I2C0 interrupt register */ + AMD_P2C_MSG2 = 0x10688, /* I2C1 interrupt register */ + AMD_P2C_MSG3 = 0x1068C, /* MP2 debug info */ + AMD_P2C_MSG_INTEN = 0x10690, /* MP2 interrupt gen register */ + AMD_P2C_MSG_INTSTS = 0x10694, /* Interrupt status */ +}; + +/* Command register data structures */ + +#define i2c_none (-1) +enum i2c_cmd { + i2c_read = 0, + i2c_write, + i2c_enable, + i2c_disable, + number_of_sensor_discovered, + is_mp2_active, + invalid_cmd = 0xF, +}; + +enum speed_enum { + speed100k = 0, + speed400k = 1, + speed1000k = 2, + speed1400k = 3, + speed3400k = 4 +}; + +enum mem_type { + use_dram = 0, + use_c2pmsg = 1, +}; + +/** + * union i2c_cmd_base : bit access of C2P commands + * @i2c_cmd: bit 0..3 i2c R/W command + * @bus_id: bit 4..7 i2c bus index + * @slave_addr: bit 8..15 slave address + * @length: bit 16..27 read/write length + * @i2c_speed: bit 28..30 bus speed + * @mem_type: bit 31 0-DRAM; 1-C2P msg o/p + */ +union i2c_cmd_base { + u32 ul; + struct { + enum i2c_cmd i2c_cmd : 4; + u8 bus_id : 4; + u32 slave_addr : 8; + u32 length : 12; + enum speed_enum i2c_speed : 3; + enum mem_type mem_type : 1; + } s; +}; + +enum response_type { + invalid_response = 0, + command_success = 1, + command_failed = 2, +}; + +enum status_type { + i2c_readcomplete_event = 0, + i2c_readfail_event = 1, + i2c_writecomplete_event = 2, + i2c_writefail_event = 3, + i2c_busenable_complete = 4, + i2c_busenable_failed = 5, + i2c_busdisable_complete = 6, + i2c_busdisable_failed = 7, + invalid_data_length = 8, + invalid_slave_address = 9, + invalid_i2cbus_id = 10, + invalid_dram_addr = 11, + invalid_command = 12, + mp2_active = 13, + numberof_sensors_discovered_resp = 14, + i2c_bus_notinitialized +}; + +/** + * union i2c_event : bit access of P2C events + * @response: bit 0..1 i2c response type + * @status: bit 2..6 status_type + * @mem_type: bit 7 0-DRAM; 1-C2P msg o/p + * @bus_id: bit 8..11 i2c bus id + * @length: bit 12..23 message length + * @slave_addr: bit 24-31 slave address + */ +union i2c_event { + u32 ul; + struct { + enum response_type response : 2; + enum status_type status : 5; + enum mem_type mem_type : 1; + u8 bus_id : 4; + u32 length : 12; + u32 slave_addr : 8; + } r; +}; + +/** + * struct amd_i2c_common - per bus/i2c adapter context, shared + * between the pci and the platform driver + * @eventval: MP2 event value set by the IRQ handler + * @mp2_dev: MP2 pci device this adapter is part of + * @msg: i2c message + * @cmd_completion: function called by the IRQ handler to signal + * the platform driver + * @reqcmd: requested i2c command type + * @cmd_success: set to true if the MP2 responded to a command with + * the expected status and response type + * @bus_id: bus index + * @i2c_speed: i2c bus speed determined by the slowest slave + * @dma_buf: if msg length > 32, holds the DMA buffer virtual address + * @dma_addr: if msg length > 32, holds the DMA buffer address + */ +struct amd_i2c_common { + union i2c_event eventval; + struct amd_mp2_dev *mp2_dev; + struct i2c_msg *msg; + void (*cmd_completion)(struct amd_i2c_common *i2c_common); + enum i2c_cmd reqcmd; + u8 cmd_success; + u8 bus_id; + enum speed_enum i2c_speed; + u8 *dma_buf; + dma_addr_t dma_addr; +#ifdef CONFIG_PM + int (*suspend)(struct amd_i2c_common *i2c_common); + int (*resume)(struct amd_i2c_common *i2c_common); +#endif /* CONFIG_PM */ +}; + +/** + * struct amd_mp2_dev - per PCI device context + * @pci_dev: PCI driver node + * @busses: MP2 devices may have up to two busses, + * each bus corresponding to an i2c adapter + * @mmio: iommapped registers + * @c2p_lock: controls access to the C2P mailbox shared between + * the two adapters + * @c2p_lock_busid: id of the adapter which locked c2p_lock + */ +struct amd_mp2_dev { + struct pci_dev *pci_dev; + struct amd_i2c_common *busses[2]; + void __iomem *mmio; + struct mutex c2p_lock; + u8 c2p_lock_busid; + unsigned int probed; + int dev_irq; +}; + +/* PCIe communication driver */ + +int amd_mp2_rw(struct amd_i2c_common *i2c_common, enum i2c_cmd reqcmd); +int amd_mp2_bus_enable_set(struct amd_i2c_common *i2c_common, bool enable); + +void amd_mp2_process_event(struct amd_i2c_common *i2c_common); + +void amd_mp2_rw_timeout(struct amd_i2c_common *i2c_common); + +int amd_mp2_register_cb(struct amd_i2c_common *i2c_common); +int amd_mp2_unregister_cb(struct amd_i2c_common *i2c_common); + +struct amd_mp2_dev *amd_mp2_find_device(void); + +static inline void amd_mp2_pm_runtime_get(struct amd_mp2_dev *mp2_dev) +{ + pm_runtime_get_sync(&mp2_dev->pci_dev->dev); +} + +static inline void amd_mp2_pm_runtime_put(struct amd_mp2_dev *mp2_dev) +{ + pm_runtime_mark_last_busy(&mp2_dev->pci_dev->dev); + pm_runtime_put_autosuspend(&mp2_dev->pci_dev->dev); +} + +#endif -- cgit v1.2.3