From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/i2c/busses/i2c-nvidia-gpu.c | 374 ++++++++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+) create mode 100644 drivers/i2c/busses/i2c-nvidia-gpu.c (limited to 'drivers/i2c/busses/i2c-nvidia-gpu.c') diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c new file mode 100644 index 000000000..12e330cd7 --- /dev/null +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nvidia GPU I2C controller Driver + * + * Copyright (C) 2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "i2c-ccgx-ucsi.h" + +/* I2C definitions */ +#define I2C_MST_CNTL 0x00 +#define I2C_MST_CNTL_GEN_START BIT(0) +#define I2C_MST_CNTL_GEN_STOP BIT(1) +#define I2C_MST_CNTL_CMD_READ (1 << 2) +#define I2C_MST_CNTL_CMD_WRITE (2 << 2) +#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6 +#define I2C_MST_CNTL_GEN_NACK BIT(28) +#define I2C_MST_CNTL_STATUS GENMASK(30, 29) +#define I2C_MST_CNTL_STATUS_OKAY (0 << 29) +#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29) +#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29) +#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29) +#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31) + +#define I2C_MST_ADDR 0x04 + +#define I2C_MST_I2C0_TIMING 0x08 +#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24) + +#define I2C_MST_DATA 0x0c + +#define I2C_MST_HYBRID_PADCTL 0x20 +#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0) +#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14) +#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15) + +struct gpu_i2c_dev { + struct device *dev; + void __iomem *regs; + struct i2c_adapter adapter; + struct i2c_board_info *gpu_ccgx_ucsi; + struct i2c_client *ccgx_client; +}; + +static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd) +{ + u32 val; + + /* enable I2C */ + val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL); + val |= I2C_MST_HYBRID_PADCTL_MODE_I2C | + I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV | + I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV; + writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL); + + /* enable 100KHZ mode */ + val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ; + val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX + << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT); + val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK; + writel(val, i2cd->regs + I2C_MST_I2C0_TIMING); +} + +static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) +{ + u32 val; + int ret; + + ret = readl_poll_timeout(i2cd->regs + I2C_MST_CNTL, val, + !(val & I2C_MST_CNTL_CYCLE_TRIGGER) || + (val & I2C_MST_CNTL_STATUS) != I2C_MST_CNTL_STATUS_BUS_BUSY, + 500, 1000 * USEC_PER_MSEC); + + if (ret) { + dev_err(i2cd->dev, "i2c timeout error %x\n", val); + return -ETIMEDOUT; + } + + val = readl(i2cd->regs + I2C_MST_CNTL); + switch (val & I2C_MST_CNTL_STATUS) { + case I2C_MST_CNTL_STATUS_OKAY: + return 0; + case I2C_MST_CNTL_STATUS_NO_ACK: + return -ENXIO; + case I2C_MST_CNTL_STATUS_TIMEOUT: + return -ETIMEDOUT; + default: + return 0; + } +} + +static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len) +{ + int status; + u32 val; + + val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ | + (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) | + I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK; + writel(val, i2cd->regs + I2C_MST_CNTL); + + status = gpu_i2c_check_status(i2cd); + if (status < 0) + return status; + + val = readl(i2cd->regs + I2C_MST_DATA); + switch (len) { + case 1: + data[0] = val; + break; + case 2: + put_unaligned_be16(val, data); + break; + case 3: + put_unaligned_be24(val, data); + break; + case 4: + put_unaligned_be32(val, data); + break; + default: + break; + } + return status; +} + +static int gpu_i2c_start(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data) +{ + u32 val; + + writel(data, i2cd->regs + I2C_MST_DATA); + + val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT); + writel(val, i2cd->regs + I2C_MST_CNTL); + + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap); + int status, status2; + bool send_stop = true; + int i, j; + + /* + * The controller supports maximum 4 byte read due to known + * limitation of sending STOP after every read. + */ + pm_runtime_get_sync(i2cd->dev); + for (i = 0; i < num; i++) { + if (msgs[i].flags & I2C_M_RD) { + /* program client address before starting read */ + writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR); + /* gpu_i2c_read has implicit start */ + status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len); + if (status < 0) + goto exit; + } else { + u8 addr = i2c_8bit_addr_from_msg(msgs + i); + + status = gpu_i2c_start(i2cd); + if (status < 0) { + if (i == 0) + send_stop = false; + goto exit; + } + + status = gpu_i2c_write(i2cd, addr); + if (status < 0) + goto exit; + + for (j = 0; j < msgs[i].len; j++) { + status = gpu_i2c_write(i2cd, msgs[i].buf[j]); + if (status < 0) + goto exit; + } + } + } + send_stop = false; + status = gpu_i2c_stop(i2cd); + if (status < 0) + goto exit; + + status = i; +exit: + if (send_stop) { + status2 = gpu_i2c_stop(i2cd); + if (status2 < 0) + dev_err(i2cd->dev, "i2c stop failed %d\n", status2); + } + pm_runtime_mark_last_busy(i2cd->dev); + pm_runtime_put_autosuspend(i2cd->dev); + return status; +} + +static const struct i2c_adapter_quirks gpu_i2c_quirks = { + .max_read_len = 4, + .max_comb_2nd_msg_len = 4, + .flags = I2C_AQ_COMB_WRITE_THEN_READ, +}; + +static u32 gpu_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm gpu_i2c_algorithm = { + .master_xfer = gpu_i2c_master_xfer, + .functionality = gpu_i2c_functionality, +}; + +/* + * This driver is for Nvidia GPU cards with USB Type-C interface. + * We want to identify the cards using vendor ID and class code only + * to avoid dependency of adding product id for any new card which + * requires this driver. + * Currently there is no class code defined for UCSI device over PCI + * so using UNKNOWN class for now and it will be updated when UCSI + * over PCI gets a class code. + * There is no other NVIDIA cards with UNKNOWN class code. Even if the + * driver gets loaded for an undesired card then eventually i2c_read() + * (initiated from UCSI i2c_client) will timeout or UCSI commands will + * timeout. + */ +#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80 +static const struct pci_device_id gpu_i2c_ids[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00}, + { } +}; +MODULE_DEVICE_TABLE(pci, gpu_i2c_ids); + +static const struct property_entry ccgx_props[] = { + /* Use FW built for NVIDIA (nv) only */ + PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'), + { } +}; + +static const struct software_node ccgx_node = { + .properties = ccgx_props, +}; + +static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct device *dev = &pdev->dev; + struct gpu_i2c_dev *i2cd; + int status; + + i2cd = devm_kzalloc(dev, sizeof(*i2cd), GFP_KERNEL); + if (!i2cd) + return -ENOMEM; + + i2cd->dev = dev; + dev_set_drvdata(dev, i2cd); + + status = pcim_enable_device(pdev); + if (status < 0) + return dev_err_probe(dev, status, "pcim_enable_device failed\n"); + + pci_set_master(pdev); + + i2cd->regs = pcim_iomap(pdev, 0, 0); + if (!i2cd->regs) + return dev_err_probe(dev, -ENOMEM, "pcim_iomap failed\n"); + + status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (status < 0) + return dev_err_probe(dev, status, "pci_alloc_irq_vectors err\n"); + + gpu_enable_i2c_bus(i2cd); + + i2c_set_adapdata(&i2cd->adapter, i2cd); + i2cd->adapter.owner = THIS_MODULE; + strscpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter", + sizeof(i2cd->adapter.name)); + i2cd->adapter.algo = &gpu_i2c_algorithm; + i2cd->adapter.quirks = &gpu_i2c_quirks; + i2cd->adapter.dev.parent = dev; + status = i2c_add_adapter(&i2cd->adapter); + if (status < 0) + goto free_irq_vectors; + + i2cd->ccgx_client = i2c_new_ccgx_ucsi(&i2cd->adapter, pdev->irq, &ccgx_node); + if (IS_ERR(i2cd->ccgx_client)) { + status = dev_err_probe(dev, PTR_ERR(i2cd->ccgx_client), "register UCSI failed\n"); + goto del_adapter; + } + + pm_runtime_set_autosuspend_delay(dev, 3000); + pm_runtime_use_autosuspend(dev); + pm_runtime_put_autosuspend(dev); + pm_runtime_allow(dev); + + return 0; + +del_adapter: + i2c_del_adapter(&i2cd->adapter); +free_irq_vectors: + pci_free_irq_vectors(pdev); + return status; +} + +static void gpu_i2c_remove(struct pci_dev *pdev) +{ + struct gpu_i2c_dev *i2cd = pci_get_drvdata(pdev); + + pm_runtime_get_noresume(i2cd->dev); + i2c_del_adapter(&i2cd->adapter); + pci_free_irq_vectors(pdev); +} + +#define gpu_i2c_suspend NULL + +static __maybe_unused int gpu_i2c_resume(struct device *dev) +{ + struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev); + + gpu_enable_i2c_bus(i2cd); + /* + * Runtime resume ccgx client so that it can see for any + * connector change event. Old ccg firmware has known + * issue of not triggering interrupt when a device is + * connected to runtime resume the controller. + */ + pm_request_resume(&i2cd->ccgx_client->dev); + return 0; +} + +static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, gpu_i2c_suspend, gpu_i2c_resume, + NULL); + +static struct pci_driver gpu_i2c_driver = { + .name = "nvidia-gpu", + .id_table = gpu_i2c_ids, + .probe = gpu_i2c_probe, + .remove = gpu_i2c_remove, + .driver = { + .pm = &gpu_i2c_driver_pm, + }, +}; + +module_pci_driver(gpu_i2c_driver); + +MODULE_AUTHOR("Ajay Gupta "); +MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3