From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/i2c/busses/scx200_acb.c | 600 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 600 insertions(+) create mode 100644 drivers/i2c/busses/scx200_acb.c (limited to 'drivers/i2c/busses/scx200_acb.c') diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c new file mode 100644 index 000000000..7b42a18bd --- /dev/null +++ b/drivers/i2c/busses/scx200_acb.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + Copyright (c) 2001,2002 Christer Weinigel + + National Semiconductor SCx200 ACCESS.bus support + Also supports the AMD CS5535 and AMD CS5536 + + Based on i2c-keywest.c which is: + Copyright (c) 2001 Benjamin Herrenschmidt + Copyright (c) 2000 Philip Edelbrock + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +MODULE_AUTHOR("Christer Weinigel "); +MODULE_DESCRIPTION("NatSemi SCx200 ACCESS.bus Driver"); +MODULE_ALIAS("platform:cs5535-smb"); +MODULE_LICENSE("GPL"); + +#define MAX_DEVICES 4 +static int base[MAX_DEVICES] = { 0x820, 0x840 }; +module_param_hw_array(base, int, ioport, NULL, 0); +MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); + +#define POLL_TIMEOUT (HZ/5) + +enum scx200_acb_state { + state_idle, + state_address, + state_command, + state_repeat_start, + state_quick, + state_read, + state_write, +}; + +static const char *scx200_acb_state_name[] = { + "idle", + "address", + "command", + "repeat_start", + "quick", + "read", + "write", +}; + +/* Physical interface */ +struct scx200_acb_iface { + struct scx200_acb_iface *next; + struct i2c_adapter adapter; + unsigned base; + struct mutex mutex; + + /* State machine data */ + enum scx200_acb_state state; + int result; + u8 address_byte; + u8 command; + u8 *ptr; + char needs_reset; + unsigned len; +}; + +/* Register Definitions */ +#define ACBSDA (iface->base + 0) +#define ACBST (iface->base + 1) +#define ACBST_SDAST 0x40 /* SDA Status */ +#define ACBST_BER 0x20 +#define ACBST_NEGACK 0x10 /* Negative Acknowledge */ +#define ACBST_STASTR 0x08 /* Stall After Start */ +#define ACBST_MASTER 0x02 +#define ACBCST (iface->base + 2) +#define ACBCST_BB 0x02 +#define ACBCTL1 (iface->base + 3) +#define ACBCTL1_STASTRE 0x80 +#define ACBCTL1_NMINTE 0x40 +#define ACBCTL1_ACK 0x10 +#define ACBCTL1_STOP 0x02 +#define ACBCTL1_START 0x01 +#define ACBADDR (iface->base + 4) +#define ACBCTL2 (iface->base + 5) +#define ACBCTL2_ENABLE 0x01 + +/************************************************************************/ + +static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) +{ + const char *errmsg; + + dev_dbg(&iface->adapter.dev, "state %s, status = 0x%02x\n", + scx200_acb_state_name[iface->state], status); + + if (status & ACBST_BER) { + errmsg = "bus error"; + goto error; + } + if (!(status & ACBST_MASTER)) { + errmsg = "not master"; + goto error; + } + if (status & ACBST_NEGACK) { + dev_dbg(&iface->adapter.dev, "negative ack in state %s\n", + scx200_acb_state_name[iface->state]); + + iface->state = state_idle; + iface->result = -ENXIO; + + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + outb(ACBST_STASTR | ACBST_NEGACK, ACBST); + + /* Reset the status register */ + outb(0, ACBST); + return; + } + + switch (iface->state) { + case state_idle: + dev_warn(&iface->adapter.dev, "interrupt in idle state\n"); + break; + + case state_address: + /* Do a pointer write first */ + outb(iface->address_byte & ~1, ACBSDA); + + iface->state = state_command; + break; + + case state_command: + outb(iface->command, ACBSDA); + + if (iface->address_byte & 1) + iface->state = state_repeat_start; + else + iface->state = state_write; + break; + + case state_repeat_start: + outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); + fallthrough; + + case state_quick: + if (iface->address_byte & 1) { + if (iface->len == 1) + outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); + else + outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); + outb(iface->address_byte, ACBSDA); + + iface->state = state_read; + } else { + outb(iface->address_byte, ACBSDA); + + iface->state = state_write; + } + break; + + case state_read: + /* Set ACK if _next_ byte will be the last one */ + if (iface->len == 2) + outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); + else + outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); + + if (iface->len == 1) { + iface->result = 0; + iface->state = state_idle; + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + } + + *iface->ptr++ = inb(ACBSDA); + --iface->len; + + break; + + case state_write: + if (iface->len == 0) { + iface->result = 0; + iface->state = state_idle; + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + break; + } + + outb(*iface->ptr++, ACBSDA); + --iface->len; + + break; + } + + return; + + error: + dev_err(&iface->adapter.dev, + "%s in state %s (addr=0x%02x, len=%d, status=0x%02x)\n", errmsg, + scx200_acb_state_name[iface->state], iface->address_byte, + iface->len, status); + + iface->state = state_idle; + iface->result = -EIO; + iface->needs_reset = 1; +} + +static void scx200_acb_poll(struct scx200_acb_iface *iface) +{ + u8 status; + unsigned long timeout; + + timeout = jiffies + POLL_TIMEOUT; + while (1) { + status = inb(ACBST); + + /* Reset the status register to avoid the hang */ + outb(0, ACBST); + + if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) { + scx200_acb_machine(iface, status); + return; + } + if (time_after(jiffies, timeout)) + break; + cpu_relax(); + cond_resched(); + } + + dev_err(&iface->adapter.dev, "timeout in state %s\n", + scx200_acb_state_name[iface->state]); + + iface->state = state_idle; + iface->result = -EIO; + iface->needs_reset = 1; +} + +static void scx200_acb_reset(struct scx200_acb_iface *iface) +{ + /* Disable the ACCESS.bus device and Configure the SCL + frequency: 16 clock cycles */ + outb(0x70, ACBCTL2); + /* Polling mode */ + outb(0, ACBCTL1); + /* Disable slave address */ + outb(0, ACBADDR); + /* Enable the ACCESS.bus device */ + outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2); + /* Free STALL after START */ + outb(inb(ACBCTL1) & ~(ACBCTL1_STASTRE | ACBCTL1_NMINTE), ACBCTL1); + /* Send a STOP */ + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + /* Clear BER, NEGACK and STASTR bits */ + outb(ACBST_BER | ACBST_NEGACK | ACBST_STASTR, ACBST); + /* Clear BB bit */ + outb(inb(ACBCST) | ACBCST_BB, ACBCST); +} + +static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, + u16 address, unsigned short flags, + char rw, u8 command, int size, + union i2c_smbus_data *data) +{ + struct scx200_acb_iface *iface = i2c_get_adapdata(adapter); + int len; + u8 *buffer; + u16 cur_word; + int rc; + + switch (size) { + case I2C_SMBUS_QUICK: + len = 0; + buffer = NULL; + break; + + case I2C_SMBUS_BYTE: + len = 1; + buffer = rw ? &data->byte : &command; + break; + + case I2C_SMBUS_BYTE_DATA: + len = 1; + buffer = &data->byte; + break; + + case I2C_SMBUS_WORD_DATA: + len = 2; + cur_word = cpu_to_le16(data->word); + buffer = (u8 *)&cur_word; + break; + + case I2C_SMBUS_I2C_BLOCK_DATA: + len = data->block[0]; + if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + buffer = &data->block[1]; + break; + + default: + return -EINVAL; + } + + dev_dbg(&adapter->dev, + "size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n", + size, address, command, len, rw); + + if (!len && rw == I2C_SMBUS_READ) { + dev_dbg(&adapter->dev, "zero length read\n"); + return -EINVAL; + } + + mutex_lock(&iface->mutex); + + iface->address_byte = (address << 1) | rw; + iface->command = command; + iface->ptr = buffer; + iface->len = len; + iface->result = -EINVAL; + iface->needs_reset = 0; + + outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); + + if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) + iface->state = state_quick; + else + iface->state = state_address; + + while (iface->state != state_idle) + scx200_acb_poll(iface); + + if (iface->needs_reset) + scx200_acb_reset(iface); + + rc = iface->result; + + mutex_unlock(&iface->mutex); + + if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ) + data->word = le16_to_cpu(cur_word); + +#ifdef DEBUG + dev_dbg(&adapter->dev, "transfer done, result: %d", rc); + if (buffer) { + int i; + printk(" data:"); + for (i = 0; i < len; ++i) + printk(" %02x", buffer[i]); + } + printk("\n"); +#endif + + return rc; +} + +static u32 scx200_acb_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK; +} + +/* For now, we only handle combined mode (smbus) */ +static const struct i2c_algorithm scx200_acb_algorithm = { + .smbus_xfer = scx200_acb_smbus_xfer, + .functionality = scx200_acb_func, +}; + +static struct scx200_acb_iface *scx200_acb_list; +static DEFINE_MUTEX(scx200_acb_list_mutex); + +static int scx200_acb_probe(struct scx200_acb_iface *iface) +{ + u8 val; + + /* Disable the ACCESS.bus device and Configure the SCL + frequency: 16 clock cycles */ + outb(0x70, ACBCTL2); + + if (inb(ACBCTL2) != 0x70) { + pr_debug("ACBCTL2 readback failed\n"); + return -ENXIO; + } + + outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1); + + val = inb(ACBCTL1); + if (val) { + pr_debug("disabled, but ACBCTL1=0x%02x\n", val); + return -ENXIO; + } + + outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2); + + outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1); + + val = inb(ACBCTL1); + if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) { + pr_debug("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n", + val); + return -ENXIO; + } + + return 0; +} + +static struct scx200_acb_iface *scx200_create_iface(const char *text, + struct device *dev, int index) +{ + struct scx200_acb_iface *iface; + struct i2c_adapter *adapter; + + iface = kzalloc(sizeof(*iface), GFP_KERNEL); + if (!iface) + return NULL; + + adapter = &iface->adapter; + i2c_set_adapdata(adapter, iface); + snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index); + adapter->owner = THIS_MODULE; + adapter->algo = &scx200_acb_algorithm; + adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + adapter->dev.parent = dev; + + mutex_init(&iface->mutex); + + return iface; +} + +static int scx200_acb_create(struct scx200_acb_iface *iface) +{ + struct i2c_adapter *adapter; + int rc; + + adapter = &iface->adapter; + + rc = scx200_acb_probe(iface); + if (rc) { + pr_warn("probe failed\n"); + return rc; + } + + scx200_acb_reset(iface); + + if (i2c_add_adapter(adapter) < 0) { + pr_err("failed to register\n"); + return -ENODEV; + } + + if (!adapter->dev.parent) { + /* If there's no dev, we're tracking (ISA) ifaces manually */ + mutex_lock(&scx200_acb_list_mutex); + iface->next = scx200_acb_list; + scx200_acb_list = iface; + mutex_unlock(&scx200_acb_list_mutex); + } + + return 0; +} + +static struct scx200_acb_iface *scx200_create_dev(const char *text, + unsigned long base, int index, struct device *dev) +{ + struct scx200_acb_iface *iface; + int rc; + + iface = scx200_create_iface(text, dev, index); + + if (iface == NULL) + return NULL; + + if (!request_region(base, 8, iface->adapter.name)) { + pr_err("can't allocate io 0x%lx-0x%lx\n", base, base + 8 - 1); + goto errout_free; + } + + iface->base = base; + rc = scx200_acb_create(iface); + + if (rc == 0) + return iface; + + release_region(base, 8); + errout_free: + kfree(iface); + return NULL; +} + +static int scx200_probe(struct platform_device *pdev) +{ + struct scx200_acb_iface *iface; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) { + dev_err(&pdev->dev, "can't fetch device resource info\n"); + return -ENODEV; + } + + iface = scx200_create_dev("CS5535", res->start, 0, &pdev->dev); + if (!iface) + return -EIO; + + dev_info(&pdev->dev, "SCx200 device '%s' registered\n", + iface->adapter.name); + platform_set_drvdata(pdev, iface); + + return 0; +} + +static void scx200_cleanup_iface(struct scx200_acb_iface *iface) +{ + i2c_del_adapter(&iface->adapter); + release_region(iface->base, 8); + kfree(iface); +} + +static int scx200_remove(struct platform_device *pdev) +{ + struct scx200_acb_iface *iface; + + iface = platform_get_drvdata(pdev); + scx200_cleanup_iface(iface); + + return 0; +} + +static struct platform_driver scx200_pci_driver = { + .driver = { + .name = "cs5535-smb", + }, + .probe = scx200_probe, + .remove = scx200_remove, +}; + +static const struct pci_device_id scx200_isa[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, + { 0, } +}; + +static __init void scx200_scan_isa(void) +{ + int i; + + if (!pci_dev_present(scx200_isa)) + return; + + for (i = 0; i < MAX_DEVICES; ++i) { + if (base[i] == 0) + continue; + + /* XXX: should we care about failures? */ + scx200_create_dev("SCx200", base[i], i, NULL); + } +} + +static int __init scx200_acb_init(void) +{ + pr_debug("NatSemi SCx200 ACCESS.bus Driver\n"); + + /* First scan for ISA-based devices */ + scx200_scan_isa(); /* XXX: should we care about errors? */ + + /* If at least one bus was created, init must succeed */ + if (scx200_acb_list) + return 0; + + /* No ISA devices; register the platform driver for PCI-based devices */ + return platform_driver_register(&scx200_pci_driver); +} + +static void __exit scx200_acb_cleanup(void) +{ + struct scx200_acb_iface *iface; + + platform_driver_unregister(&scx200_pci_driver); + + mutex_lock(&scx200_acb_list_mutex); + while ((iface = scx200_acb_list) != NULL) { + scx200_acb_list = iface->next; + mutex_unlock(&scx200_acb_list_mutex); + + scx200_cleanup_iface(iface); + + mutex_lock(&scx200_acb_list_mutex); + } + mutex_unlock(&scx200_acb_list_mutex); +} + +module_init(scx200_acb_init); +module_exit(scx200_acb_cleanup); -- cgit v1.2.3