From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/i2c/i2c-stub.c | 413 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 413 insertions(+) create mode 100644 drivers/i2c/i2c-stub.c (limited to 'drivers/i2c/i2c-stub.c') diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c new file mode 100644 index 000000000..d642cad21 --- /dev/null +++ b/drivers/i2c/i2c-stub.c @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + i2c-stub.c - I2C/SMBus chip emulator + + Copyright (c) 2004 Mark M. Hoffman + Copyright (C) 2007-2014 Jean Delvare + +*/ + +#define pr_fmt(fmt) "i2c-stub: " fmt + +#include +#include +#include +#include +#include +#include +#include + +#define MAX_CHIPS 10 + +/* + * Support for I2C_FUNC_SMBUS_BLOCK_DATA is disabled by default and must + * be enabled explicitly by setting the I2C_FUNC_SMBUS_BLOCK_DATA bits + * in the 'functionality' module parameter. + */ +#define STUB_FUNC_DEFAULT \ + (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_I2C_BLOCK) + +#define STUB_FUNC_ALL \ + (STUB_FUNC_DEFAULT | I2C_FUNC_SMBUS_BLOCK_DATA) + +static unsigned short chip_addr[MAX_CHIPS]; +module_param_array(chip_addr, ushort, NULL, S_IRUGO); +MODULE_PARM_DESC(chip_addr, + "Chip addresses (up to 10, between 0x03 and 0x77)"); + +static unsigned long functionality = STUB_FUNC_DEFAULT; +module_param(functionality, ulong, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(functionality, "Override functionality bitfield"); + +/* Some chips have banked register ranges */ + +static u8 bank_reg[MAX_CHIPS]; +module_param_array(bank_reg, byte, NULL, S_IRUGO); +MODULE_PARM_DESC(bank_reg, "Bank register"); + +static u8 bank_mask[MAX_CHIPS]; +module_param_array(bank_mask, byte, NULL, S_IRUGO); +MODULE_PARM_DESC(bank_mask, "Bank value mask"); + +static u8 bank_start[MAX_CHIPS]; +module_param_array(bank_start, byte, NULL, S_IRUGO); +MODULE_PARM_DESC(bank_start, "First banked register"); + +static u8 bank_end[MAX_CHIPS]; +module_param_array(bank_end, byte, NULL, S_IRUGO); +MODULE_PARM_DESC(bank_end, "Last banked register"); + +struct smbus_block_data { + struct list_head node; + u8 command; + u8 len; + u8 block[I2C_SMBUS_BLOCK_MAX]; +}; + +struct stub_chip { + u8 pointer; + u16 words[256]; /* Byte operations use the LSB as per SMBus + specification */ + struct list_head smbus_blocks; + + /* For chips with banks, extra registers are allocated dynamically */ + u8 bank_reg; + u8 bank_shift; + u8 bank_mask; + u8 bank_sel; /* Currently selected bank */ + u8 bank_start; + u8 bank_end; + u16 bank_size; + u16 *bank_words; /* Room for bank_mask * bank_size registers */ +}; + +static struct stub_chip *stub_chips; +static int stub_chips_nr; + +static struct smbus_block_data *stub_find_block(struct device *dev, + struct stub_chip *chip, + u8 command, bool create) +{ + struct smbus_block_data *b, *rb = NULL; + + list_for_each_entry(b, &chip->smbus_blocks, node) { + if (b->command == command) { + rb = b; + break; + } + } + if (rb == NULL && create) { + rb = devm_kzalloc(dev, sizeof(*rb), GFP_KERNEL); + if (rb == NULL) + return rb; + rb->command = command; + list_add(&rb->node, &chip->smbus_blocks); + } + return rb; +} + +static u16 *stub_get_wordp(struct stub_chip *chip, u8 offset) +{ + if (chip->bank_sel && + offset >= chip->bank_start && offset <= chip->bank_end) + return chip->bank_words + + (chip->bank_sel - 1) * chip->bank_size + + offset - chip->bank_start; + else + return chip->words + offset; +} + +/* Return negative errno on error. */ +static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags, + char read_write, u8 command, int size, union i2c_smbus_data *data) +{ + s32 ret; + int i, len; + struct stub_chip *chip = NULL; + struct smbus_block_data *b; + u16 *wordp; + + /* Search for the right chip */ + for (i = 0; i < stub_chips_nr; i++) { + if (addr == chip_addr[i]) { + chip = stub_chips + i; + break; + } + } + if (!chip) + return -ENODEV; + + switch (size) { + + case I2C_SMBUS_QUICK: + dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr); + ret = 0; + break; + + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_WRITE) { + chip->pointer = command; + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, wrote 0x%02x.\n", + addr, command); + } else { + wordp = stub_get_wordp(chip, chip->pointer++); + data->byte = *wordp & 0xff; + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, read 0x%02x.\n", + addr, data->byte); + } + + ret = 0; + break; + + case I2C_SMBUS_BYTE_DATA: + wordp = stub_get_wordp(chip, command); + if (read_write == I2C_SMBUS_WRITE) { + *wordp &= 0xff00; + *wordp |= data->byte; + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n", + addr, data->byte, command); + + /* Set the bank as needed */ + if (chip->bank_words && command == chip->bank_reg) { + chip->bank_sel = + (data->byte >> chip->bank_shift) + & chip->bank_mask; + dev_dbg(&adap->dev, + "switching to bank %u.\n", + chip->bank_sel); + } + } else { + data->byte = *wordp & 0xff; + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n", + addr, data->byte, command); + } + chip->pointer = command + 1; + + ret = 0; + break; + + case I2C_SMBUS_WORD_DATA: + wordp = stub_get_wordp(chip, command); + if (read_write == I2C_SMBUS_WRITE) { + *wordp = data->word; + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n", + addr, data->word, command); + } else { + data->word = *wordp; + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n", + addr, data->word, command); + } + + ret = 0; + break; + + case I2C_SMBUS_I2C_BLOCK_DATA: + /* + * We ignore banks here, because banked chips don't use I2C + * block transfers + */ + if (data->block[0] > 256 - command) /* Avoid overrun */ + data->block[0] = 256 - command; + len = data->block[0]; + if (read_write == I2C_SMBUS_WRITE) { + for (i = 0; i < len; i++) { + chip->words[command + i] &= 0xff00; + chip->words[command + i] |= data->block[1 + i]; + } + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n", + addr, len, command); + } else { + for (i = 0; i < len; i++) { + data->block[1 + i] = + chip->words[command + i] & 0xff; + } + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n", + addr, len, command); + } + + ret = 0; + break; + + case I2C_SMBUS_BLOCK_DATA: + /* + * We ignore banks here, because chips typically don't use both + * banks and SMBus block transfers + */ + b = stub_find_block(&adap->dev, chip, command, false); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) { + ret = -EINVAL; + break; + } + if (b == NULL) { + b = stub_find_block(&adap->dev, chip, command, + true); + if (b == NULL) { + ret = -ENOMEM; + break; + } + } + /* Largest write sets read block length */ + if (len > b->len) + b->len = len; + for (i = 0; i < len; i++) + b->block[i] = data->block[i + 1]; + /* update for byte and word commands */ + chip->words[command] = (b->block[0] << 8) | b->len; + dev_dbg(&adap->dev, + "smbus block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n", + addr, len, command); + } else { + if (b == NULL) { + dev_dbg(&adap->dev, + "SMBus block read command without prior block write not supported\n"); + ret = -EOPNOTSUPP; + break; + } + len = b->len; + data->block[0] = len; + for (i = 0; i < len; i++) + data->block[i + 1] = b->block[i]; + dev_dbg(&adap->dev, + "smbus block data - addr 0x%02x, read %d bytes at 0x%02x.\n", + addr, len, command); + } + + ret = 0; + break; + + default: + dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); + ret = -EOPNOTSUPP; + break; + } /* switch (size) */ + + return ret; +} + +static u32 stub_func(struct i2c_adapter *adapter) +{ + return STUB_FUNC_ALL & functionality; +} + +static const struct i2c_algorithm smbus_algorithm = { + .functionality = stub_func, + .smbus_xfer = stub_xfer, +}; + +static struct i2c_adapter stub_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, + .algo = &smbus_algorithm, + .name = "SMBus stub driver", +}; + +static int __init i2c_stub_allocate_banks(int i) +{ + struct stub_chip *chip = stub_chips + i; + + chip->bank_reg = bank_reg[i]; + chip->bank_start = bank_start[i]; + chip->bank_end = bank_end[i]; + chip->bank_size = bank_end[i] - bank_start[i] + 1; + + /* We assume that all bits in the mask are contiguous */ + chip->bank_mask = bank_mask[i]; + while (!(chip->bank_mask & 1)) { + chip->bank_shift++; + chip->bank_mask >>= 1; + } + + chip->bank_words = kcalloc(chip->bank_mask * chip->bank_size, + sizeof(u16), + GFP_KERNEL); + if (!chip->bank_words) + return -ENOMEM; + + pr_debug("Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n", + chip->bank_mask, chip->bank_size, chip->bank_start, + chip->bank_end); + + return 0; +} + +static void i2c_stub_free(void) +{ + int i; + + for (i = 0; i < stub_chips_nr; i++) + kfree(stub_chips[i].bank_words); + kfree(stub_chips); +} + +static int __init i2c_stub_init(void) +{ + int i, ret; + + if (!chip_addr[0]) { + pr_err("Please specify a chip address\n"); + return -ENODEV; + } + + for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { + if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { + pr_err("Invalid chip address 0x%02x\n", + chip_addr[i]); + return -EINVAL; + } + + pr_info("Virtual chip at 0x%02x\n", chip_addr[i]); + } + + /* Allocate memory for all chips at once */ + stub_chips_nr = i; + stub_chips = kcalloc(stub_chips_nr, sizeof(struct stub_chip), + GFP_KERNEL); + if (!stub_chips) + return -ENOMEM; + + for (i = 0; i < stub_chips_nr; i++) { + INIT_LIST_HEAD(&stub_chips[i].smbus_blocks); + + /* Allocate extra memory for banked register ranges */ + if (bank_mask[i]) { + ret = i2c_stub_allocate_banks(i); + if (ret) + goto fail_free; + } + } + + ret = i2c_add_adapter(&stub_adapter); + if (ret) + goto fail_free; + + return 0; + + fail_free: + i2c_stub_free(); + return ret; +} + +static void __exit i2c_stub_exit(void) +{ + i2c_del_adapter(&stub_adapter); + i2c_stub_free(); +} + +MODULE_AUTHOR("Mark M. Hoffman "); +MODULE_DESCRIPTION("I2C stub driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_stub_init); +module_exit(i2c_stub_exit); -- cgit v1.2.3