From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/adc/ad9467.c | 473 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 473 insertions(+) create mode 100644 drivers/iio/adc/ad9467.c (limited to 'drivers/iio/adc/ad9467.c') diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c new file mode 100644 index 000000000..0621cf59d --- /dev/null +++ b/drivers/iio/adc/ad9467.c @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices AD9467 SPI ADC driver + * + * Copyright 2012-2020 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#include +#include + +#include + +#include + +/* + * ADI High-Speed ADC common spi interface registers + * See Application-Note AN-877: + * https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf + */ + +#define AN877_ADC_REG_CHIP_PORT_CONF 0x00 +#define AN877_ADC_REG_CHIP_ID 0x01 +#define AN877_ADC_REG_CHIP_GRADE 0x02 +#define AN877_ADC_REG_CHAN_INDEX 0x05 +#define AN877_ADC_REG_TRANSFER 0xFF +#define AN877_ADC_REG_MODES 0x08 +#define AN877_ADC_REG_TEST_IO 0x0D +#define AN877_ADC_REG_ADC_INPUT 0x0F +#define AN877_ADC_REG_OFFSET 0x10 +#define AN877_ADC_REG_OUTPUT_MODE 0x14 +#define AN877_ADC_REG_OUTPUT_ADJUST 0x15 +#define AN877_ADC_REG_OUTPUT_PHASE 0x16 +#define AN877_ADC_REG_OUTPUT_DELAY 0x17 +#define AN877_ADC_REG_VREF 0x18 +#define AN877_ADC_REG_ANALOG_INPUT 0x2C + +/* AN877_ADC_REG_TEST_IO */ +#define AN877_ADC_TESTMODE_OFF 0x0 +#define AN877_ADC_TESTMODE_MIDSCALE_SHORT 0x1 +#define AN877_ADC_TESTMODE_POS_FULLSCALE 0x2 +#define AN877_ADC_TESTMODE_NEG_FULLSCALE 0x3 +#define AN877_ADC_TESTMODE_ALT_CHECKERBOARD 0x4 +#define AN877_ADC_TESTMODE_PN23_SEQ 0x5 +#define AN877_ADC_TESTMODE_PN9_SEQ 0x6 +#define AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE 0x7 +#define AN877_ADC_TESTMODE_USER 0x8 +#define AN877_ADC_TESTMODE_BIT_TOGGLE 0x9 +#define AN877_ADC_TESTMODE_SYNC 0xA +#define AN877_ADC_TESTMODE_ONE_BIT_HIGH 0xB +#define AN877_ADC_TESTMODE_MIXED_BIT_FREQUENCY 0xC +#define AN877_ADC_TESTMODE_RAMP 0xF + +/* AN877_ADC_REG_TRANSFER */ +#define AN877_ADC_TRANSFER_SYNC 0x1 + +/* AN877_ADC_REG_OUTPUT_MODE */ +#define AN877_ADC_OUTPUT_MODE_OFFSET_BINARY 0x0 +#define AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT 0x1 +#define AN877_ADC_OUTPUT_MODE_GRAY_CODE 0x2 + +/* AN877_ADC_REG_OUTPUT_PHASE */ +#define AN877_ADC_OUTPUT_EVEN_ODD_MODE_EN 0x20 +#define AN877_ADC_INVERT_DCO_CLK 0x80 + +/* AN877_ADC_REG_OUTPUT_DELAY */ +#define AN877_ADC_DCO_DELAY_ENABLE 0x80 + +/* + * Analog Devices AD9265 16-Bit, 125/105/80 MSPS ADC + */ + +#define CHIPID_AD9265 0x64 +#define AD9265_DEF_OUTPUT_MODE 0x40 +#define AD9265_REG_VREF_MASK 0xC0 + +/* + * Analog Devices AD9434 12-Bit, 370/500 MSPS ADC + */ + +#define CHIPID_AD9434 0x6A +#define AD9434_DEF_OUTPUT_MODE 0x00 +#define AD9434_REG_VREF_MASK 0xC0 + +/* + * Analog Devices AD9467 16-Bit, 200/250 MSPS ADC + */ + +#define CHIPID_AD9467 0x50 +#define AD9467_DEF_OUTPUT_MODE 0x08 +#define AD9467_REG_VREF_MASK 0x0F + +enum { + ID_AD9265, + ID_AD9434, + ID_AD9467, +}; + +struct ad9467_chip_info { + struct adi_axi_adc_chip_info axi_adc_info; + unsigned int default_output_mode; + unsigned int vref_mask; +}; + +#define to_ad9467_chip_info(_info) \ + container_of(_info, struct ad9467_chip_info, axi_adc_info) + +struct ad9467_state { + struct spi_device *spi; + struct clk *clk; + unsigned int output_mode; + + struct gpio_desc *pwrdown_gpio; + struct gpio_desc *reset_gpio; +}; + +static int ad9467_spi_read(struct spi_device *spi, unsigned int reg) +{ + unsigned char tbuf[2], rbuf[1]; + int ret; + + tbuf[0] = 0x80 | (reg >> 8); + tbuf[1] = reg & 0xFF; + + ret = spi_write_then_read(spi, + tbuf, ARRAY_SIZE(tbuf), + rbuf, ARRAY_SIZE(rbuf)); + + if (ret < 0) + return ret; + + return rbuf[0]; +} + +static int ad9467_spi_write(struct spi_device *spi, unsigned int reg, + unsigned int val) +{ + unsigned char buf[3]; + + buf[0] = reg >> 8; + buf[1] = reg & 0xFF; + buf[2] = val; + + return spi_write(spi, buf, ARRAY_SIZE(buf)); +} + +static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct spi_device *spi = st->spi; + int ret; + + if (readval == NULL) { + ret = ad9467_spi_write(spi, reg, writeval); + ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER, + AN877_ADC_TRANSFER_SYNC); + return ret; + } + + ret = ad9467_spi_read(spi, reg); + if (ret < 0) + return ret; + *readval = ret; + + return 0; +} + +static const unsigned int ad9265_scale_table[][2] = { + {1250, 0x00}, {1500, 0x40}, {1750, 0x80}, {2000, 0xC0}, +}; + +static const unsigned int ad9434_scale_table[][2] = { + {1600, 0x1C}, {1580, 0x1D}, {1550, 0x1E}, {1520, 0x1F}, {1500, 0x00}, + {1470, 0x01}, {1440, 0x02}, {1420, 0x03}, {1390, 0x04}, {1360, 0x05}, + {1340, 0x06}, {1310, 0x07}, {1280, 0x08}, {1260, 0x09}, {1230, 0x0A}, + {1200, 0x0B}, {1180, 0x0C}, +}; + +static const unsigned int ad9467_scale_table[][2] = { + {2000, 0}, {2100, 6}, {2200, 7}, + {2300, 8}, {2400, 9}, {2500, 10}, +}; + +static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index, + unsigned int *val, unsigned int *val2) +{ + const struct adi_axi_adc_chip_info *info = conv->chip_info; + const struct iio_chan_spec *chan = &info->channels[0]; + unsigned int tmp; + + tmp = (info->scale_table[index][0] * 1000000ULL) >> + chan->scan_type.realbits; + *val = tmp / 1000000; + *val2 = tmp % 1000000; +} + +#define AD9467_CHAN(_chan, _si, _bits, _sign) \ +{ \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = _chan, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _si, \ + .scan_type = { \ + .sign = _sign, \ + .realbits = _bits, \ + .storagebits = 16, \ + }, \ +} + +static const struct iio_chan_spec ad9434_channels[] = { + AD9467_CHAN(0, 0, 12, 'S'), +}; + +static const struct iio_chan_spec ad9467_channels[] = { + AD9467_CHAN(0, 0, 16, 'S'), +}; + +static const struct ad9467_chip_info ad9467_chip_tbl[] = { + [ID_AD9265] = { + .axi_adc_info = { + .id = CHIPID_AD9265, + .max_rate = 125000000UL, + .scale_table = ad9265_scale_table, + .num_scales = ARRAY_SIZE(ad9265_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), + }, + .default_output_mode = AD9265_DEF_OUTPUT_MODE, + .vref_mask = AD9265_REG_VREF_MASK, + }, + [ID_AD9434] = { + .axi_adc_info = { + .id = CHIPID_AD9434, + .max_rate = 500000000UL, + .scale_table = ad9434_scale_table, + .num_scales = ARRAY_SIZE(ad9434_scale_table), + .channels = ad9434_channels, + .num_channels = ARRAY_SIZE(ad9434_channels), + }, + .default_output_mode = AD9434_DEF_OUTPUT_MODE, + .vref_mask = AD9434_REG_VREF_MASK, + }, + [ID_AD9467] = { + .axi_adc_info = { + .id = CHIPID_AD9467, + .max_rate = 250000000UL, + .scale_table = ad9467_scale_table, + .num_scales = ARRAY_SIZE(ad9467_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), + }, + .default_output_mode = AD9467_DEF_OUTPUT_MODE, + .vref_mask = AD9467_REG_VREF_MASK, + }, +}; + +static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) +{ + const struct adi_axi_adc_chip_info *info = conv->chip_info; + const struct ad9467_chip_info *info1 = to_ad9467_chip_info(info); + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + unsigned int i, vref_val; + + vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF); + + vref_val &= info1->vref_mask; + + for (i = 0; i < info->num_scales; i++) { + if (vref_val == info->scale_table[i][1]) + break; + } + + if (i == info->num_scales) + return -ERANGE; + + __ad9467_get_scale(conv, i, val, val2); + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) +{ + const struct adi_axi_adc_chip_info *info = conv->chip_info; + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + unsigned int scale_val[2]; + unsigned int i; + + if (val != 0) + return -EINVAL; + + for (i = 0; i < info->num_scales; i++) { + __ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]); + if (scale_val[0] != val || scale_val[1] != val2) + continue; + + ad9467_spi_write(st->spi, AN877_ADC_REG_VREF, + info->scale_table[i][1]); + ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER, + AN877_ADC_TRANSFER_SYNC); + return 0; + } + + return -EINVAL; +} + +static int ad9467_read_raw(struct adi_axi_adc_conv *conv, + struct iio_chan_spec const *chan, + int *val, int *val2, long m) +{ + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + + switch (m) { + case IIO_CHAN_INFO_SCALE: + return ad9467_get_scale(conv, val, val2); + case IIO_CHAN_INFO_SAMP_FREQ: + *val = clk_get_rate(st->clk); + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ad9467_write_raw(struct adi_axi_adc_conv *conv, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + const struct adi_axi_adc_chip_info *info = conv->chip_info; + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + long r_clk; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return ad9467_set_scale(conv, val, val2); + case IIO_CHAN_INFO_SAMP_FREQ: + r_clk = clk_round_rate(st->clk, val); + if (r_clk < 0 || r_clk > info->max_rate) { + dev_warn(&st->spi->dev, + "Error setting ADC sample rate %ld", r_clk); + return -EINVAL; + } + + return clk_set_rate(st->clk, r_clk); + default: + return -EINVAL; + } +} + +static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode) +{ + int ret; + + ret = ad9467_spi_write(spi, AN877_ADC_REG_OUTPUT_MODE, mode); + if (ret < 0) + return ret; + + return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER, + AN877_ADC_TRANSFER_SYNC); +} + +static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) +{ + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + + return ad9467_outputmode_set(st->spi, st->output_mode); +} + +static int ad9467_probe(struct spi_device *spi) +{ + const struct ad9467_chip_info *info; + struct adi_axi_adc_conv *conv; + struct ad9467_state *st; + unsigned int id; + int ret; + + info = of_device_get_match_data(&spi->dev); + if (!info) + info = (void *)spi_get_device_id(spi)->driver_data; + if (!info) + return -ENODEV; + + conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st)); + if (IS_ERR(conv)) + return PTR_ERR(conv); + + st = adi_axi_adc_conv_priv(conv); + st->spi = spi; + + st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); + if (IS_ERR(st->clk)) + return PTR_ERR(st->clk); + + st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", + GPIOD_OUT_LOW); + if (IS_ERR(st->pwrdown_gpio)) + return PTR_ERR(st->pwrdown_gpio); + + st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(st->reset_gpio)) + return PTR_ERR(st->reset_gpio); + + if (st->reset_gpio) { + udelay(1); + ret = gpiod_direction_output(st->reset_gpio, 1); + if (ret) + return ret; + mdelay(10); + } + + conv->chip_info = &info->axi_adc_info; + + id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID); + if (id != conv->chip_info->id) { + dev_err(&spi->dev, "Mismatch CHIP_ID, got 0x%X, expected 0x%X\n", + id, conv->chip_info->id); + return -ENODEV; + } + + conv->reg_access = ad9467_reg_access; + conv->write_raw = ad9467_write_raw; + conv->read_raw = ad9467_read_raw; + conv->preenable_setup = ad9467_preenable_setup; + + st->output_mode = info->default_output_mode | + AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT; + + return 0; +} + +static const struct of_device_id ad9467_of_match[] = { + { .compatible = "adi,ad9265", .data = &ad9467_chip_tbl[ID_AD9265], }, + { .compatible = "adi,ad9434", .data = &ad9467_chip_tbl[ID_AD9434], }, + { .compatible = "adi,ad9467", .data = &ad9467_chip_tbl[ID_AD9467], }, + {} +}; +MODULE_DEVICE_TABLE(of, ad9467_of_match); + +static const struct spi_device_id ad9467_ids[] = { + { "ad9265", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9265] }, + { "ad9434", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9434] }, + { "ad9467", (kernel_ulong_t)&ad9467_chip_tbl[ID_AD9467] }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad9467_ids); + +static struct spi_driver ad9467_driver = { + .driver = { + .name = "ad9467", + .of_match_table = ad9467_of_match, + }, + .probe = ad9467_probe, + .id_table = ad9467_ids, +}; +module_spi_driver(ad9467_driver); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ADI_AXI); -- cgit v1.2.3