From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/adc/imx7d_adc.c | 563 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 563 insertions(+) create mode 100644 drivers/iio/adc/imx7d_adc.c (limited to 'drivers/iio/adc/imx7d_adc.c') diff --git a/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c new file mode 100644 index 000000000..22da81bac --- /dev/null +++ b/drivers/iio/adc/imx7d_adc.c @@ -0,0 +1,563 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Freescale i.MX7D ADC driver + * + * Copyright (C) 2015 Freescale Semiconductor, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* ADC register */ +#define IMX7D_REG_ADC_CH_A_CFG1 0x00 +#define IMX7D_REG_ADC_CH_A_CFG2 0x10 +#define IMX7D_REG_ADC_CH_B_CFG1 0x20 +#define IMX7D_REG_ADC_CH_B_CFG2 0x30 +#define IMX7D_REG_ADC_CH_C_CFG1 0x40 +#define IMX7D_REG_ADC_CH_C_CFG2 0x50 +#define IMX7D_REG_ADC_CH_D_CFG1 0x60 +#define IMX7D_REG_ADC_CH_D_CFG2 0x70 +#define IMX7D_REG_ADC_CH_SW_CFG 0x80 +#define IMX7D_REG_ADC_TIMER_UNIT 0x90 +#define IMX7D_REG_ADC_DMA_FIFO 0xa0 +#define IMX7D_REG_ADC_FIFO_STATUS 0xb0 +#define IMX7D_REG_ADC_INT_SIG_EN 0xc0 +#define IMX7D_REG_ADC_INT_EN 0xd0 +#define IMX7D_REG_ADC_INT_STATUS 0xe0 +#define IMX7D_REG_ADC_CHA_B_CNV_RSLT 0xf0 +#define IMX7D_REG_ADC_CHC_D_CNV_RSLT 0x100 +#define IMX7D_REG_ADC_CH_SW_CNV_RSLT 0x110 +#define IMX7D_REG_ADC_DMA_FIFO_DAT 0x120 +#define IMX7D_REG_ADC_ADC_CFG 0x130 + +#define IMX7D_REG_ADC_CHANNEL_CFG2_BASE 0x10 +#define IMX7D_EACH_CHANNEL_REG_OFFSET 0x20 + +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN (0x1 << 31) +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE BIT(30) +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN BIT(29) +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(x) ((x) << 24) + +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4 (0x0 << 12) +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8 (0x1 << 12) +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16 (0x2 << 12) +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32 (0x3 << 12) + +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4 (0x0 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8 (0x1 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16 (0x2 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32 (0x3 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64 (0x4 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128 (0x5 << 29) + +#define IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN BIT(31) +#define IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN BIT(1) +#define IMX7D_REG_ADC_ADC_CFG_ADC_EN BIT(0) + +#define IMX7D_REG_ADC_INT_CHA_COV_INT_EN BIT(8) +#define IMX7D_REG_ADC_INT_CHB_COV_INT_EN BIT(9) +#define IMX7D_REG_ADC_INT_CHC_COV_INT_EN BIT(10) +#define IMX7D_REG_ADC_INT_CHD_COV_INT_EN BIT(11) +#define IMX7D_REG_ADC_INT_CHANNEL_INT_EN \ + (IMX7D_REG_ADC_INT_CHA_COV_INT_EN | \ + IMX7D_REG_ADC_INT_CHB_COV_INT_EN | \ + IMX7D_REG_ADC_INT_CHC_COV_INT_EN | \ + IMX7D_REG_ADC_INT_CHD_COV_INT_EN) +#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS 0xf00 +#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT 0xf0000 + +#define IMX7D_ADC_TIMEOUT msecs_to_jiffies(100) +#define IMX7D_ADC_INPUT_CLK 24000000 + +enum imx7d_adc_clk_pre_div { + IMX7D_ADC_ANALOG_CLK_PRE_DIV_4, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_8, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_16, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_32, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_64, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_128, +}; + +enum imx7d_adc_average_num { + IMX7D_ADC_AVERAGE_NUM_4, + IMX7D_ADC_AVERAGE_NUM_8, + IMX7D_ADC_AVERAGE_NUM_16, + IMX7D_ADC_AVERAGE_NUM_32, +}; + +struct imx7d_adc_feature { + enum imx7d_adc_clk_pre_div clk_pre_div; + enum imx7d_adc_average_num avg_num; + + u32 core_time_unit; /* impact the sample rate */ +}; + +struct imx7d_adc { + struct device *dev; + void __iomem *regs; + struct clk *clk; + /* lock to protect against multiple access to the device */ + struct mutex lock; + u32 vref_uv; + u32 value; + u32 channel; + u32 pre_div_num; + + struct regulator *vref; + struct imx7d_adc_feature adc_feature; + + struct completion completion; +}; + +struct imx7d_adc_analogue_core_clk { + u32 pre_div; + u32 reg_config; +}; + +#define IMX7D_ADC_ANALOGUE_CLK_CONFIG(_pre_div, _reg_conf) { \ + .pre_div = (_pre_div), \ + .reg_config = (_reg_conf), \ +} + +static const struct imx7d_adc_analogue_core_clk imx7d_adc_analogue_clk[] = { + IMX7D_ADC_ANALOGUE_CLK_CONFIG(4, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(8, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(16, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(32, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(64, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(128, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128), +}; + +#define IMX7D_ADC_CHAN(_idx) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ +} + +static const struct iio_chan_spec imx7d_adc_iio_channels[] = { + IMX7D_ADC_CHAN(0), + IMX7D_ADC_CHAN(1), + IMX7D_ADC_CHAN(2), + IMX7D_ADC_CHAN(3), + IMX7D_ADC_CHAN(4), + IMX7D_ADC_CHAN(5), + IMX7D_ADC_CHAN(6), + IMX7D_ADC_CHAN(7), + IMX7D_ADC_CHAN(8), + IMX7D_ADC_CHAN(9), + IMX7D_ADC_CHAN(10), + IMX7D_ADC_CHAN(11), + IMX7D_ADC_CHAN(12), + IMX7D_ADC_CHAN(13), + IMX7D_ADC_CHAN(14), + IMX7D_ADC_CHAN(15), +}; + +static const u32 imx7d_adc_average_num[] = { + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4, + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8, + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16, + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32, +}; + +static void imx7d_adc_feature_config(struct imx7d_adc *info) +{ + info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4; + info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32; + info->adc_feature.core_time_unit = 1; +} + +static void imx7d_adc_sample_rate_set(struct imx7d_adc *info) +{ + struct imx7d_adc_feature *adc_feature = &info->adc_feature; + struct imx7d_adc_analogue_core_clk adc_analogure_clk; + u32 i; + u32 tmp_cfg1; + u32 sample_rate = 0; + + /* + * Before sample set, disable channel A,B,C,D. Here we + * clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1. + */ + for (i = 0; i < 4; i++) { + tmp_cfg1 = + readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET); + tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN; + writel(tmp_cfg1, + info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET); + } + + adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div]; + sample_rate |= adc_analogure_clk.reg_config; + info->pre_div_num = adc_analogure_clk.pre_div; + + sample_rate |= adc_feature->core_time_unit; + writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT); +} + +static void imx7d_adc_hw_init(struct imx7d_adc *info) +{ + u32 cfg; + + /* power up and enable adc analogue core */ + cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG); + cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN | + IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN); + cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN; + writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG); + + /* enable channel A,B,C,D interrupt */ + writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, + info->regs + IMX7D_REG_ADC_INT_SIG_EN); + writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, + info->regs + IMX7D_REG_ADC_INT_EN); + + imx7d_adc_sample_rate_set(info); +} + +static void imx7d_adc_channel_set(struct imx7d_adc *info) +{ + u32 cfg1 = 0; + u32 cfg2; + u32 channel; + + channel = info->channel; + + /* the channel choose single conversion, and enable average mode */ + cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN | + IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE | + IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN); + + /* + * physical channel 0 chose logical channel A + * physical channel 1 chose logical channel B + * physical channel 2 chose logical channel C + * physical channel 3 chose logical channel D + */ + cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel); + + /* + * read register REG_ADC_CH_A\B\C\D_CFG2, according to the + * channel chosen + */ + cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + + IMX7D_REG_ADC_CHANNEL_CFG2_BASE); + + cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num]; + + /* + * write the register REG_ADC_CH_A\B\C\D_CFG2, according to + * the channel chosen + */ + writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + + IMX7D_REG_ADC_CHANNEL_CFG2_BASE); + writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel); +} + +static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info) +{ + u32 analogue_core_clk; + u32 core_time_unit = info->adc_feature.core_time_unit; + u32 tmp; + + analogue_core_clk = IMX7D_ADC_INPUT_CLK / info->pre_div_num; + tmp = (core_time_unit + 1) * 6; + + return analogue_core_clk / tmp; +} + +static int imx7d_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct imx7d_adc *info = iio_priv(indio_dev); + + u32 channel; + long ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&info->lock); + reinit_completion(&info->completion); + + channel = chan->channel & 0x03; + info->channel = channel; + imx7d_adc_channel_set(info); + + ret = wait_for_completion_interruptible_timeout + (&info->completion, IMX7D_ADC_TIMEOUT); + if (ret == 0) { + mutex_unlock(&info->lock); + return -ETIMEDOUT; + } + if (ret < 0) { + mutex_unlock(&info->lock); + return ret; + } + + *val = info->value; + mutex_unlock(&info->lock); + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + info->vref_uv = regulator_get_voltage(info->vref); + *val = info->vref_uv / 1000; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = imx7d_adc_get_sample_rate(info); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int imx7d_adc_read_data(struct imx7d_adc *info) +{ + u32 channel; + u32 value; + + channel = info->channel & 0x03; + + /* + * channel A and B conversion result share one register, + * bit[27~16] is the channel B conversion result, + * bit[11~0] is the channel A conversion result. + * channel C and D is the same. + */ + if (channel < 2) + value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT); + else + value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT); + if (channel & 0x1) /* channel B or D */ + value = (value >> 16) & 0xFFF; + else /* channel A or C */ + value &= 0xFFF; + + return value; +} + +static irqreturn_t imx7d_adc_isr(int irq, void *dev_id) +{ + struct imx7d_adc *info = dev_id; + int status; + + status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS); + if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) { + info->value = imx7d_adc_read_data(info); + complete(&info->completion); + + /* + * The register IMX7D_REG_ADC_INT_STATUS can't clear + * itself after read operation, need software to write + * 0 to the related bit. Here we clear the channel A/B/C/D + * conversion finished flag. + */ + status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS; + writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS); + } + + /* + * If the channel A/B/C/D conversion timeout, report it and clear these + * timeout flags. + */ + if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) { + dev_err(info->dev, + "ADC got conversion time out interrupt: 0x%08x\n", + status); + status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT; + writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS); + } + + return IRQ_HANDLED; +} + +static int imx7d_adc_reg_access(struct iio_dev *indio_dev, + unsigned reg, unsigned writeval, + unsigned *readval) +{ + struct imx7d_adc *info = iio_priv(indio_dev); + + if (!readval || reg % 4 || reg > IMX7D_REG_ADC_ADC_CFG) + return -EINVAL; + + *readval = readl(info->regs + reg); + + return 0; +} + +static const struct iio_info imx7d_adc_iio_info = { + .read_raw = &imx7d_adc_read_raw, + .debugfs_reg_access = &imx7d_adc_reg_access, +}; + +static const struct of_device_id imx7d_adc_match[] = { + { .compatible = "fsl,imx7d-adc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx7d_adc_match); + +static void imx7d_adc_power_down(struct imx7d_adc *info) +{ + u32 adc_cfg; + + adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG); + adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN | + IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN; + adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN; + writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG); +} + +static int imx7d_adc_enable(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct imx7d_adc *info = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(info->vref); + if (ret) { + dev_err(info->dev, + "Can't enable adc reference top voltage, err = %d\n", + ret); + return ret; + } + + ret = clk_prepare_enable(info->clk); + if (ret) { + dev_err(info->dev, + "Could not prepare or enable clock.\n"); + regulator_disable(info->vref); + return ret; + } + + imx7d_adc_hw_init(info); + + return 0; +} + +static int imx7d_adc_disable(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct imx7d_adc *info = iio_priv(indio_dev); + + imx7d_adc_power_down(info); + + clk_disable_unprepare(info->clk); + regulator_disable(info->vref); + + return 0; +} + +static void __imx7d_adc_disable(void *data) +{ + imx7d_adc_disable(data); +} + +static int imx7d_adc_probe(struct platform_device *pdev) +{ + struct imx7d_adc *info; + struct iio_dev *indio_dev; + struct device *dev = &pdev->dev; + int irq; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*info)); + if (!indio_dev) { + dev_err(&pdev->dev, "Failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + info->dev = dev; + + info->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return dev_err_probe(dev, irq, "Failed getting irq\n"); + + info->clk = devm_clk_get(dev, "adc"); + if (IS_ERR(info->clk)) + return dev_err_probe(dev, PTR_ERR(info->clk), "Failed getting clock\n"); + + info->vref = devm_regulator_get(dev, "vref"); + if (IS_ERR(info->vref)) + return dev_err_probe(dev, PTR_ERR(info->vref), + "Failed getting reference voltage\n"); + + platform_set_drvdata(pdev, indio_dev); + + init_completion(&info->completion); + + indio_dev->name = dev_name(dev); + indio_dev->info = &imx7d_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = imx7d_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels); + + ret = devm_request_irq(dev, irq, imx7d_adc_isr, 0, dev_name(dev), info); + if (ret < 0) { + dev_err(dev, "Failed requesting irq, irq = %d\n", irq); + return ret; + } + + imx7d_adc_feature_config(info); + + ret = imx7d_adc_enable(dev); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, __imx7d_adc_disable, dev); + if (ret) + return ret; + + mutex_init(&info->lock); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't register the device.\n"); + return ret; + } + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_disable, + imx7d_adc_enable); + +static struct platform_driver imx7d_adc_driver = { + .probe = imx7d_adc_probe, + .driver = { + .name = "imx7d_adc", + .of_match_table = imx7d_adc_match, + .pm = pm_sleep_ptr(&imx7d_adc_pm_ops), + }, +}; + +module_platform_driver(imx7d_adc_driver); + +MODULE_AUTHOR("Haibo Chen "); +MODULE_DESCRIPTION("Freescale IMX7D ADC driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3