From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/adc/npcm_adc.c | 353 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 353 insertions(+) create mode 100644 drivers/iio/adc/npcm_adc.c (limited to 'drivers/iio/adc/npcm_adc.c') diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c new file mode 100644 index 000000000..ba4cd8f49 --- /dev/null +++ b/drivers/iio/adc/npcm_adc.c @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology corporation. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct npcm_adc_info { + u32 data_mask; + u32 internal_vref; + u32 res_bits; +}; + +struct npcm_adc { + bool int_status; + u32 adc_sample_hz; + struct device *dev; + void __iomem *regs; + struct clk *adc_clk; + wait_queue_head_t wq; + struct regulator *vref; + struct reset_control *reset; + /* + * Lock to protect the device state during a potential concurrent + * read access from userspace. Reading a raw value requires a sequence + * of register writes, then a wait for a event and finally a register + * read, during which userspace could issue another read request. + * This lock protects a read access from ocurring before another one + * has finished. + */ + struct mutex lock; + const struct npcm_adc_info *data; +}; + +/* ADC registers */ +#define NPCM_ADCCON 0x00 +#define NPCM_ADCDATA 0x04 + +/* ADCCON Register Bits */ +#define NPCM_ADCCON_ADC_INT_EN BIT(21) +#define NPCM_ADCCON_REFSEL BIT(19) +#define NPCM_ADCCON_ADC_INT_ST BIT(18) +#define NPCM_ADCCON_ADC_EN BIT(17) +#define NPCM_ADCCON_ADC_RST BIT(16) +#define NPCM_ADCCON_ADC_CONV BIT(13) + +#define NPCM_ADCCON_CH_MASK GENMASK(27, 24) +#define NPCM_ADCCON_CH(x) ((x) << 24) +#define NPCM_ADCCON_DIV_SHIFT 1 +#define NPCM_ADCCON_DIV_MASK GENMASK(8, 1) + +#define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN) + +/* ADC General Definition */ +static const struct npcm_adc_info npxm7xx_adc_info = { + .data_mask = GENMASK(9, 0), + .internal_vref = 2048, + .res_bits = 10, +}; + +static const struct npcm_adc_info npxm8xx_adc_info = { + .data_mask = GENMASK(11, 0), + .internal_vref = 1229, + .res_bits = 12, +}; + +#define NPCM_ADC_CHAN(ch) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = ch, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ +} + +static const struct iio_chan_spec npcm_adc_iio_channels[] = { + NPCM_ADC_CHAN(0), + NPCM_ADC_CHAN(1), + NPCM_ADC_CHAN(2), + NPCM_ADC_CHAN(3), + NPCM_ADC_CHAN(4), + NPCM_ADC_CHAN(5), + NPCM_ADC_CHAN(6), + NPCM_ADC_CHAN(7), +}; + +static irqreturn_t npcm_adc_isr(int irq, void *data) +{ + u32 regtemp; + struct iio_dev *indio_dev = data; + struct npcm_adc *info = iio_priv(indio_dev); + + regtemp = ioread32(info->regs + NPCM_ADCCON); + if (regtemp & NPCM_ADCCON_ADC_INT_ST) { + iowrite32(regtemp, info->regs + NPCM_ADCCON); + wake_up_interruptible(&info->wq); + info->int_status = true; + } + + return IRQ_HANDLED; +} + +static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) +{ + int ret; + u32 regtemp; + + /* Select ADC channel */ + regtemp = ioread32(info->regs + NPCM_ADCCON); + regtemp &= ~NPCM_ADCCON_CH_MASK; + info->int_status = false; + iowrite32(regtemp | NPCM_ADCCON_CH(channel) | + NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); + + ret = wait_event_interruptible_timeout(info->wq, info->int_status, + msecs_to_jiffies(10)); + if (ret == 0) { + regtemp = ioread32(info->regs + NPCM_ADCCON); + if (regtemp & NPCM_ADCCON_ADC_CONV) { + /* if conversion failed - reset ADC module */ + reset_control_assert(info->reset); + msleep(100); + reset_control_deassert(info->reset); + msleep(100); + + /* Enable ADC and start conversion module */ + iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV, + info->regs + NPCM_ADCCON); + dev_err(info->dev, "RESET ADC Complete\n"); + } + return -ETIMEDOUT; + } + if (ret < 0) + return ret; + + *val = ioread32(info->regs + NPCM_ADCDATA); + *val &= info->data->data_mask; + + return 0; +} + +static int npcm_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret; + int vref_uv; + struct npcm_adc *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&info->lock); + ret = npcm_adc_read(info, val, chan->channel); + mutex_unlock(&info->lock); + if (ret) { + dev_err(info->dev, "NPCM ADC read failed\n"); + return ret; + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + if (!IS_ERR(info->vref)) { + vref_uv = regulator_get_voltage(info->vref); + *val = vref_uv / 1000; + } else { + *val = info->data->internal_vref; + } + *val2 = info->data->res_bits; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = info->adc_sample_hz; + return IIO_VAL_INT; + default: + return -EINVAL; + } + + return 0; +} + +static const struct iio_info npcm_adc_iio_info = { + .read_raw = &npcm_adc_read_raw, +}; + +static const struct of_device_id npcm_adc_match[] = { + { .compatible = "nuvoton,npcm750-adc", .data = &npxm7xx_adc_info}, + { .compatible = "nuvoton,npcm845-adc", .data = &npxm8xx_adc_info}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, npcm_adc_match); + +static int npcm_adc_probe(struct platform_device *pdev) +{ + int ret; + int irq; + u32 div; + u32 reg_con; + struct npcm_adc *info; + struct iio_dev *indio_dev; + struct device *dev = &pdev->dev; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + info = iio_priv(indio_dev); + + info->data = device_get_match_data(dev); + if (!info->data) + return -EINVAL; + + mutex_init(&info->lock); + + info->dev = &pdev->dev; + + info->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + info->reset = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(info->reset)) + return PTR_ERR(info->reset); + + info->adc_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(info->adc_clk)) { + dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); + return PTR_ERR(info->adc_clk); + } + + /* calculate ADC clock sample rate */ + reg_con = ioread32(info->regs + NPCM_ADCCON); + div = reg_con & NPCM_ADCCON_DIV_MASK; + div = div >> NPCM_ADCCON_DIV_SHIFT; + info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + ret = -EINVAL; + goto err_disable_clk; + } + + ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0, + "NPCM_ADC", indio_dev); + if (ret < 0) { + dev_err(dev, "failed requesting interrupt\n"); + goto err_disable_clk; + } + + reg_con = ioread32(info->regs + NPCM_ADCCON); + info->vref = devm_regulator_get_optional(&pdev->dev, "vref"); + if (!IS_ERR(info->vref)) { + ret = regulator_enable(info->vref); + if (ret) { + dev_err(&pdev->dev, "Can't enable ADC reference voltage\n"); + goto err_disable_clk; + } + + iowrite32(reg_con & ~NPCM_ADCCON_REFSEL, + info->regs + NPCM_ADCCON); + } else { + /* + * Any error which is not ENODEV indicates the regulator + * has been specified and so is a failure case. + */ + if (PTR_ERR(info->vref) != -ENODEV) { + ret = PTR_ERR(info->vref); + goto err_disable_clk; + } + + /* Use internal reference */ + iowrite32(reg_con | NPCM_ADCCON_REFSEL, + info->regs + NPCM_ADCCON); + } + + init_waitqueue_head(&info->wq); + + reg_con = ioread32(info->regs + NPCM_ADCCON); + reg_con |= NPCM_ADC_ENABLE; + + /* Enable the ADC Module */ + iowrite32(reg_con, info->regs + NPCM_ADCCON); + + /* Start ADC conversion */ + iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); + + platform_set_drvdata(pdev, indio_dev); + indio_dev->name = dev_name(&pdev->dev); + indio_dev->info = &npcm_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = npcm_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't register the device.\n"); + goto err_iio_register; + } + + pr_info("NPCM ADC driver probed\n"); + + return 0; + +err_iio_register: + iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); + if (!IS_ERR(info->vref)) + regulator_disable(info->vref); +err_disable_clk: + clk_disable_unprepare(info->adc_clk); + + return ret; +} + +static int npcm_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct npcm_adc *info = iio_priv(indio_dev); + u32 regtemp; + + iio_device_unregister(indio_dev); + + regtemp = ioread32(info->regs + NPCM_ADCCON); + iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); + if (!IS_ERR(info->vref)) + regulator_disable(info->vref); + clk_disable_unprepare(info->adc_clk); + + return 0; +} + +static struct platform_driver npcm_adc_driver = { + .probe = npcm_adc_probe, + .remove = npcm_adc_remove, + .driver = { + .name = "npcm_adc", + .of_match_table = npcm_adc_match, + }, +}; + +module_platform_driver(npcm_adc_driver); + +MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver"); +MODULE_AUTHOR("Tomer Maimon "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3