From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/addac/stx104.c | 402 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 402 insertions(+) create mode 100644 drivers/iio/addac/stx104.c (limited to 'drivers/iio/addac/stx104.c') diff --git a/drivers/iio/addac/stx104.c b/drivers/iio/addac/stx104.c new file mode 100644 index 000000000..48a91a95e --- /dev/null +++ b/drivers/iio/addac/stx104.c @@ -0,0 +1,402 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IIO driver for the Apex Embedded Systems STX104 + * Copyright (C) 2016 William Breathitt Gray + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STX104_OUT_CHAN(chan) { \ + .type = IIO_VOLTAGE, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .indexed = 1, \ + .output = 1 \ +} +#define STX104_IN_CHAN(chan, diff) { \ + .type = IIO_VOLTAGE, \ + .channel = chan, \ + .channel2 = chan, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \ + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .indexed = 1, \ + .differential = diff \ +} + +#define STX104_NUM_OUT_CHAN 2 + +#define STX104_EXTENT 16 + +static unsigned int base[max_num_isa_dev(STX104_EXTENT)]; +static unsigned int num_stx104; +module_param_hw_array(base, uint, ioport, &num_stx104, 0); +MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); + +/** + * struct stx104_reg - device register structure + * @ssr_ad: Software Strobe Register and ADC Data + * @achan: ADC Channel + * @dio: Digital I/O + * @dac: DAC Channels + * @cir_asr: Clear Interrupts and ADC Status + * @acr: ADC Control + * @pccr_fsh: Pacer Clock Control and FIFO Status MSB + * @acfg: ADC Configuration + */ +struct stx104_reg { + u16 ssr_ad; + u8 achan; + u8 dio; + u16 dac[2]; + u8 cir_asr; + u8 acr; + u8 pccr_fsh; + u8 acfg; +}; + +/** + * struct stx104_iio - IIO device private data structure + * @chan_out_states: channels' output states + * @reg: I/O address offset for the device registers + */ +struct stx104_iio { + unsigned int chan_out_states[STX104_NUM_OUT_CHAN]; + struct stx104_reg __iomem *reg; +}; + +/** + * struct stx104_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @lock: synchronization lock to prevent I/O race conditions + * @base: base port address of the GPIO device + * @out_state: output bits state + */ +struct stx104_gpio { + struct gpio_chip chip; + spinlock_t lock; + u8 __iomem *base; + unsigned int out_state; +}; + +static int stx104_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + struct stx104_reg __iomem *const reg = priv->reg; + unsigned int adc_config; + int adbu; + int gain; + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + /* get gain configuration */ + adc_config = ioread8(®->acfg); + gain = adc_config & 0x3; + + *val = 1 << gain; + return IIO_VAL_INT; + case IIO_CHAN_INFO_RAW: + if (chan->output) { + *val = priv->chan_out_states[chan->channel]; + return IIO_VAL_INT; + } + + /* select ADC channel */ + iowrite8(chan->channel | (chan->channel << 4), ®->achan); + + /* trigger ADC sample capture by writing to the 8-bit + * Software Strobe Register and wait for completion + */ + iowrite8(0, ®->ssr_ad); + while (ioread8(®->cir_asr) & BIT(7)); + + *val = ioread16(®->ssr_ad); + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + /* get ADC bipolar/unipolar configuration */ + adc_config = ioread8(®->acfg); + adbu = !(adc_config & BIT(2)); + + *val = -32768 * adbu; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* get ADC bipolar/unipolar and gain configuration */ + adc_config = ioread8(®->acfg); + adbu = !(adc_config & BIT(2)); + gain = adc_config & 0x3; + + *val = 5; + *val2 = 15 - adbu + gain; + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +} + +static int stx104_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + /* Only four gain states (x1, x2, x4, x8) */ + switch (val) { + case 1: + iowrite8(0, &priv->reg->acfg); + break; + case 2: + iowrite8(1, &priv->reg->acfg); + break; + case 4: + iowrite8(2, &priv->reg->acfg); + break; + case 8: + iowrite8(3, &priv->reg->acfg); + break; + default: + return -EINVAL; + } + + return 0; + case IIO_CHAN_INFO_RAW: + if (chan->output) { + /* DAC can only accept up to a 16-bit value */ + if ((unsigned int)val > 65535) + return -EINVAL; + + priv->chan_out_states[chan->channel] = val; + iowrite16(val, &priv->reg->dac[chan->channel]); + + return 0; + } + return -EINVAL; + } + + return -EINVAL; +} + +static const struct iio_info stx104_info = { + .read_raw = stx104_read_raw, + .write_raw = stx104_write_raw +}; + +/* single-ended input channels configuration */ +static const struct iio_chan_spec stx104_channels_sing[] = { + STX104_OUT_CHAN(0), STX104_OUT_CHAN(1), + STX104_IN_CHAN(0, 0), STX104_IN_CHAN(1, 0), STX104_IN_CHAN(2, 0), + STX104_IN_CHAN(3, 0), STX104_IN_CHAN(4, 0), STX104_IN_CHAN(5, 0), + STX104_IN_CHAN(6, 0), STX104_IN_CHAN(7, 0), STX104_IN_CHAN(8, 0), + STX104_IN_CHAN(9, 0), STX104_IN_CHAN(10, 0), STX104_IN_CHAN(11, 0), + STX104_IN_CHAN(12, 0), STX104_IN_CHAN(13, 0), STX104_IN_CHAN(14, 0), + STX104_IN_CHAN(15, 0) +}; +/* differential input channels configuration */ +static const struct iio_chan_spec stx104_channels_diff[] = { + STX104_OUT_CHAN(0), STX104_OUT_CHAN(1), + STX104_IN_CHAN(0, 1), STX104_IN_CHAN(1, 1), STX104_IN_CHAN(2, 1), + STX104_IN_CHAN(3, 1), STX104_IN_CHAN(4, 1), STX104_IN_CHAN(5, 1), + STX104_IN_CHAN(6, 1), STX104_IN_CHAN(7, 1) +}; + +static int stx104_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + /* GPIO 0-3 are input only, while the rest are output only */ + if (offset < 4) + return 1; + + return 0; +} + +static int stx104_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + if (offset >= 4) + return -EINVAL; + + return 0; +} + +static int stx104_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + if (offset < 4) + return -EINVAL; + + chip->set(chip, offset, value); + return 0; +} + +static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + + if (offset >= 4) + return -EINVAL; + + return !!(ioread8(stx104gpio->base) & BIT(offset)); +} + +static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + + *bits = ioread8(stx104gpio->base); + + return 0; +} + +static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + const unsigned int mask = BIT(offset) >> 4; + unsigned long flags; + + if (offset < 4) + return; + + spin_lock_irqsave(&stx104gpio->lock, flags); + + if (value) + stx104gpio->out_state |= mask; + else + stx104gpio->out_state &= ~mask; + + iowrite8(stx104gpio->out_state, stx104gpio->base); + + spin_unlock_irqrestore(&stx104gpio->lock, flags); +} + +#define STX104_NGPIO 8 +static const char *stx104_names[STX104_NGPIO] = { + "DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3" +}; + +static void stx104_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + unsigned long flags; + + /* verify masked GPIO are output */ + if (!(*mask & 0xF0)) + return; + + *mask >>= 4; + *bits >>= 4; + + spin_lock_irqsave(&stx104gpio->lock, flags); + + stx104gpio->out_state &= ~*mask; + stx104gpio->out_state |= *mask & *bits; + iowrite8(stx104gpio->out_state, stx104gpio->base); + + spin_unlock_irqrestore(&stx104gpio->lock, flags); +} + +static int stx104_probe(struct device *dev, unsigned int id) +{ + struct iio_dev *indio_dev; + struct stx104_iio *priv; + struct stx104_gpio *stx104gpio; + int err; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL); + if (!stx104gpio) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], STX104_EXTENT, + dev_name(dev))) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + STX104_EXTENT); + return -EBUSY; + } + + priv = iio_priv(indio_dev); + priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT); + if (!priv->reg) + return -ENOMEM; + + indio_dev->info = &stx104_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + /* determine if differential inputs */ + if (ioread8(&priv->reg->cir_asr) & BIT(5)) { + indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff); + indio_dev->channels = stx104_channels_diff; + } else { + indio_dev->num_channels = ARRAY_SIZE(stx104_channels_sing); + indio_dev->channels = stx104_channels_sing; + } + + indio_dev->name = dev_name(dev); + + /* configure device for software trigger operation */ + iowrite8(0, &priv->reg->acr); + + /* initialize gain setting to x1 */ + iowrite8(0, &priv->reg->acfg); + + /* initialize DAC output to 0V */ + iowrite16(0, &priv->reg->dac[0]); + iowrite16(0, &priv->reg->dac[1]); + + stx104gpio->chip.label = dev_name(dev); + stx104gpio->chip.parent = dev; + stx104gpio->chip.owner = THIS_MODULE; + stx104gpio->chip.base = -1; + stx104gpio->chip.ngpio = STX104_NGPIO; + stx104gpio->chip.names = stx104_names; + stx104gpio->chip.get_direction = stx104_gpio_get_direction; + stx104gpio->chip.direction_input = stx104_gpio_direction_input; + stx104gpio->chip.direction_output = stx104_gpio_direction_output; + stx104gpio->chip.get = stx104_gpio_get; + stx104gpio->chip.get_multiple = stx104_gpio_get_multiple; + stx104gpio->chip.set = stx104_gpio_set; + stx104gpio->chip.set_multiple = stx104_gpio_set_multiple; + stx104gpio->base = &priv->reg->dio; + stx104gpio->out_state = 0x0; + + spin_lock_init(&stx104gpio->lock); + + err = devm_gpiochip_add_data(dev, &stx104gpio->chip, stx104gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + return devm_iio_device_register(dev, indio_dev); +} + +static struct isa_driver stx104_driver = { + .probe = stx104_probe, + .driver = { + .name = "stx104" + }, +}; + +module_isa_driver(stx104_driver, num_stx104); + +MODULE_AUTHOR("William Breathitt Gray "); +MODULE_DESCRIPTION("Apex Embedded Systems STX104 IIO driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3