From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/amplifiers/ada4250.c | 403 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 drivers/iio/amplifiers/ada4250.c (limited to 'drivers/iio/amplifiers/ada4250.c') diff --git a/drivers/iio/amplifiers/ada4250.c b/drivers/iio/amplifiers/ada4250.c new file mode 100644 index 000000000..4b32d350d --- /dev/null +++ b/drivers/iio/amplifiers/ada4250.c @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADA4250 driver + * + * Copyright 2022 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* ADA4250 Register Map */ +#define ADA4250_REG_GAIN_MUX 0x00 +#define ADA4250_REG_REFBUF_EN 0x01 +#define ADA4250_REG_RESET 0x02 +#define ADA4250_REG_SNSR_CAL_VAL 0x04 +#define ADA4250_REG_SNSR_CAL_CNFG 0x05 +#define ADA4250_REG_DIE_REV 0x18 +#define ADA4250_REG_CHIP_ID 0x19 + +/* ADA4250_REG_GAIN_MUX Map */ +#define ADA4250_GAIN_MUX_MSK GENMASK(2, 0) + +/* ADA4250_REG_REFBUF Map */ +#define ADA4250_REFBUF_MSK BIT(0) + +/* ADA4250_REG_RESET Map */ +#define ADA4250_RESET_MSK BIT(0) + +/* ADA4250_REG_SNSR_CAL_VAL Map */ +#define ADA4250_CAL_CFG_BIAS_MSK GENMASK(7, 0) + +/* ADA4250_REG_SNSR_CAL_CNFG Bit Definition */ +#define ADA4250_BIAS_SET_MSK GENMASK(3, 2) +#define ADA4250_RANGE_SET_MSK GENMASK(1, 0) + +/* Miscellaneous definitions */ +#define ADA4250_CHIP_ID 0x4250 +#define ADA4250_RANGE1 0 +#define ADA4250_RANGE4 3 + +/* ADA4250 current bias set */ +enum ada4250_current_bias { + ADA4250_BIAS_DISABLED, + ADA4250_BIAS_BANDGAP, + ADA4250_BIAS_AVDD, +}; + +struct ada4250_state { + struct spi_device *spi; + struct regmap *regmap; + struct regulator *reg; + /* Protect against concurrent accesses to the device and data content */ + struct mutex lock; + u8 bias; + u8 gain; + int offset_uv; + bool refbuf_en; +}; + +/* ADA4250 Current Bias Source Settings: Disabled, Bandgap Reference, AVDD */ +static const int calibbias_table[] = {0, 1, 2}; + +/* ADA4250 Gain (V/V) values: 1, 2, 4, 8, 16, 32, 64, 128 */ +static const int hwgain_table[] = {1, 2, 4, 8, 16, 32, 64, 128}; + +static const struct regmap_config ada4250_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = BIT(7), + .max_register = 0x1A, +}; + +static int ada4250_set_offset_uv(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int offset_uv) +{ + struct ada4250_state *st = iio_priv(indio_dev); + + int i, ret, x[8], max_vos, min_vos, voltage_v, vlsb = 0; + u8 offset_raw, range = ADA4250_RANGE1; + u32 lsb_coeff[6] = {1333, 2301, 4283, 8289, 16311, 31599}; + + if (st->bias == 0 || st->bias == 3) + return -EINVAL; + + voltage_v = regulator_get_voltage(st->reg); + voltage_v = DIV_ROUND_CLOSEST(voltage_v, 1000000); + + if (st->bias == ADA4250_BIAS_AVDD) + x[0] = voltage_v; + else + x[0] = 5; + + x[1] = 126 * (x[0] - 1); + + for (i = 0; i < 6; i++) + x[i + 2] = DIV_ROUND_CLOSEST(x[1] * 1000, lsb_coeff[i]); + + if (st->gain == 0) + return -EINVAL; + + /* + * Compute Range and Voltage per LSB for the Sensor Offset Calibration + * Example of computation for Range 1 and Range 2 (Curren Bias Set = AVDD): + * Range 1 Range 2 + * Gain | Max Vos(mV) | LSB(mV) | Max Vos(mV) | LSB(mV) | + * 2 | X1*127 | X1=0.126(AVDD-1) | X1*3*127 | X1*3 | + * 4 | X2*127 | X2=X1/1.3333 | X2*3*127 | X2*3 | + * 8 | X3*127 | X3=X1/2.301 | X3*3*127 | X3*3 | + * 16 | X4*127 | X4=X1/4.283 | X4*3*127 | X4*3 | + * 32 | X5*127 | X5=X1/8.289 | X5*3*127 | X5*3 | + * 64 | X6*127 | X6=X1/16.311 | X6*3*127 | X6*3 | + * 128 | X7*127 | X7=X1/31.599 | X7*3*127 | X7*3 | + */ + for (i = ADA4250_RANGE1; i <= ADA4250_RANGE4; i++) { + max_vos = x[st->gain] * 127 * ((1 << (i + 1)) - 1); + min_vos = -1 * max_vos; + if (offset_uv > min_vos && offset_uv < max_vos) { + range = i; + vlsb = x[st->gain] * ((1 << (i + 1)) - 1); + break; + } + } + + if (vlsb <= 0) + return -EINVAL; + + offset_raw = DIV_ROUND_CLOSEST(abs(offset_uv), vlsb); + + mutex_lock(&st->lock); + ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, + ADA4250_RANGE_SET_MSK, + FIELD_PREP(ADA4250_RANGE_SET_MSK, range)); + if (ret) + goto exit; + + st->offset_uv = offset_raw * vlsb; + + /* + * To set the offset calibration value, use bits [6:0] and bit 7 as the + * polarity bit (set to "0" for a negative offset and "1" for a positive + * offset). + */ + if (offset_uv < 0) { + offset_raw |= BIT(7); + st->offset_uv *= (-1); + } + + ret = regmap_write(st->regmap, ADA4250_REG_SNSR_CAL_VAL, offset_raw); + +exit: + mutex_unlock(&st->lock); + + return ret; +} + +static int ada4250_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long info) +{ + struct ada4250_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_HARDWAREGAIN: + ret = regmap_read(st->regmap, ADA4250_REG_GAIN_MUX, val); + if (ret) + return ret; + + *val = BIT(*val); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + *val = st->offset_uv; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + ret = regmap_read(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, val); + if (ret) + return ret; + + *val = FIELD_GET(ADA4250_BIAS_SET_MSK, *val); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 1; + *val2 = 1000000; + + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } +} + +static int ada4250_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + struct ada4250_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_HARDWAREGAIN: + ret = regmap_write(st->regmap, ADA4250_REG_GAIN_MUX, + FIELD_PREP(ADA4250_GAIN_MUX_MSK, ilog2(val))); + if (ret) + return ret; + + st->gain = ilog2(val); + + return ret; + case IIO_CHAN_INFO_OFFSET: + return ada4250_set_offset_uv(indio_dev, chan, val); + case IIO_CHAN_INFO_CALIBBIAS: + ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, + ADA4250_BIAS_SET_MSK, + FIELD_PREP(ADA4250_BIAS_SET_MSK, val)); + if (ret) + return ret; + + st->bias = val; + + return ret; + default: + return -EINVAL; + } +} + +static int ada4250_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_CALIBBIAS: + *vals = calibbias_table; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(calibbias_table); + + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_HARDWAREGAIN: + *vals = hwgain_table; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(hwgain_table); + + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int ada4250_reg_access(struct iio_dev *indio_dev, + unsigned int reg, + unsigned int write_val, + unsigned int *read_val) +{ + struct ada4250_state *st = iio_priv(indio_dev); + + if (read_val) + return regmap_read(st->regmap, reg, read_val); + else + return regmap_write(st->regmap, reg, write_val); +} + +static const struct iio_info ada4250_info = { + .read_raw = ada4250_read_raw, + .write_raw = ada4250_write_raw, + .read_avail = &ada4250_read_avail, + .debugfs_reg_access = &ada4250_reg_access, +}; + +static const struct iio_chan_spec ada4250_channels[] = { + { + .type = IIO_VOLTAGE, + .output = 1, + .indexed = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_HARDWAREGAIN), + } +}; + +static void ada4250_reg_disable(void *data) +{ + regulator_disable(data); +} + +static int ada4250_init(struct ada4250_state *st) +{ + int ret; + u16 chip_id; + u8 data[2] __aligned(8) = {}; + struct spi_device *spi = st->spi; + + st->refbuf_en = device_property_read_bool(&spi->dev, "adi,refbuf-enable"); + + st->reg = devm_regulator_get(&spi->dev, "avdd"); + if (IS_ERR(st->reg)) + return dev_err_probe(&spi->dev, PTR_ERR(st->reg), + "failed to get the AVDD voltage\n"); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified AVDD supply\n"); + return ret; + } + + ret = devm_add_action_or_reset(&spi->dev, ada4250_reg_disable, st->reg); + if (ret) + return ret; + + ret = regmap_write(st->regmap, ADA4250_REG_RESET, + FIELD_PREP(ADA4250_RESET_MSK, 1)); + if (ret) + return ret; + + ret = regmap_bulk_read(st->regmap, ADA4250_REG_CHIP_ID, data, 2); + if (ret) + return ret; + + chip_id = get_unaligned_le16(data); + + if (chip_id != ADA4250_CHIP_ID) { + dev_err(&spi->dev, "Invalid chip ID.\n"); + return -EINVAL; + } + + return regmap_write(st->regmap, ADA4250_REG_REFBUF_EN, + FIELD_PREP(ADA4250_REFBUF_MSK, st->refbuf_en)); +} + +static int ada4250_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct regmap *regmap; + struct ada4250_state *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + regmap = devm_regmap_init_spi(spi, &ada4250_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + st = iio_priv(indio_dev); + st->regmap = regmap; + st->spi = spi; + + indio_dev->info = &ada4250_info; + indio_dev->name = "ada4250"; + indio_dev->channels = ada4250_channels; + indio_dev->num_channels = ARRAY_SIZE(ada4250_channels); + + mutex_init(&st->lock); + + ret = ada4250_init(st); + if (ret) { + dev_err(&spi->dev, "ADA4250 init failed\n"); + return ret; + } + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id ada4250_id[] = { + { "ada4250", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, ada4250_id); + +static const struct of_device_id ada4250_of_match[] = { + { .compatible = "adi,ada4250" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ada4250_of_match); + +static struct spi_driver ada4250_driver = { + .driver = { + .name = "ada4250", + .of_match_table = ada4250_of_match, + }, + .probe = ada4250_probe, + .id_table = ada4250_id, +}; +module_spi_driver(ada4250_driver); + +MODULE_AUTHOR("Antoniu Miclaus