From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/dac/ti-dac7311.c | 334 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 334 insertions(+) create mode 100644 drivers/iio/dac/ti-dac7311.c (limited to 'drivers/iio/dac/ti-dac7311.c') diff --git a/drivers/iio/dac/ti-dac7311.c b/drivers/iio/dac/ti-dac7311.c new file mode 100644 index 000000000..7f89d2a52 --- /dev/null +++ b/drivers/iio/dac/ti-dac7311.c @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0 +/* ti-dac7311.c - Texas Instruments 8/10/12-bit 1-channel DAC driver + * + * Copyright (C) 2018 CMC NV + * + * https://www.ti.com/lit/ds/symlink/dac7311.pdf + */ + +#include +#include +#include +#include + +enum { + ID_DAC5311 = 0, + ID_DAC6311, + ID_DAC7311, +}; + +enum { + POWER_1KOHM_TO_GND = 0, + POWER_100KOHM_TO_GND, + POWER_TRI_STATE, +}; + +struct ti_dac_spec { + u8 resolution; +}; + +static const struct ti_dac_spec ti_dac_spec[] = { + [ID_DAC5311] = { .resolution = 8 }, + [ID_DAC6311] = { .resolution = 10 }, + [ID_DAC7311] = { .resolution = 12 }, +}; + +/** + * struct ti_dac_chip - TI DAC chip + * @lock: protects write sequences + * @vref: regulator generating Vref + * @spi: SPI device to send data to the device + * @val: cached value + * @powerdown: whether the chip is powered down + * @powerdown_mode: selected by the user + * @resolution: resolution of the chip + * @buf: buffer for transfer data + */ +struct ti_dac_chip { + struct mutex lock; + struct regulator *vref; + struct spi_device *spi; + u16 val; + bool powerdown; + u8 powerdown_mode; + u8 resolution; + u8 buf[2] __aligned(IIO_DMA_MINALIGN); +}; + +static u8 ti_dac_get_power(struct ti_dac_chip *ti_dac, bool powerdown) +{ + if (powerdown) + return ti_dac->powerdown_mode + 1; + + return 0; +} + +static int ti_dac_cmd(struct ti_dac_chip *ti_dac, u8 power, u16 val) +{ + u8 shift = 14 - ti_dac->resolution; + + ti_dac->buf[0] = (val << shift) & 0xFF; + ti_dac->buf[1] = (power << 6) | (val >> (8 - shift)); + return spi_write(ti_dac->spi, ti_dac->buf, 2); +} + +static const char * const ti_dac_powerdown_modes[] = { + "1kohm_to_gnd", + "100kohm_to_gnd", + "three_state", +}; + +static int ti_dac_get_powerdown_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct ti_dac_chip *ti_dac = iio_priv(indio_dev); + + return ti_dac->powerdown_mode; +} + +static int ti_dac_set_powerdown_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct ti_dac_chip *ti_dac = iio_priv(indio_dev); + + ti_dac->powerdown_mode = mode; + return 0; +} + +static const struct iio_enum ti_dac_powerdown_mode = { + .items = ti_dac_powerdown_modes, + .num_items = ARRAY_SIZE(ti_dac_powerdown_modes), + .get = ti_dac_get_powerdown_mode, + .set = ti_dac_set_powerdown_mode, +}; + +static ssize_t ti_dac_read_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct ti_dac_chip *ti_dac = iio_priv(indio_dev); + + return sysfs_emit(buf, "%d\n", ti_dac->powerdown); +} + +static ssize_t ti_dac_write_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct ti_dac_chip *ti_dac = iio_priv(indio_dev); + bool powerdown; + u8 power; + int ret; + + ret = kstrtobool(buf, &powerdown); + if (ret) + return ret; + + power = ti_dac_get_power(ti_dac, powerdown); + + mutex_lock(&ti_dac->lock); + ret = ti_dac_cmd(ti_dac, power, 0); + if (!ret) + ti_dac->powerdown = powerdown; + mutex_unlock(&ti_dac->lock); + + return ret ? ret : len; +} + +static const struct iio_chan_spec_ext_info ti_dac_ext_info[] = { + { + .name = "powerdown", + .read = ti_dac_read_powerdown, + .write = ti_dac_write_powerdown, + .shared = IIO_SHARED_BY_TYPE, + }, + IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE, &ti_dac_powerdown_mode), + IIO_ENUM_AVAILABLE("powerdown_mode", IIO_SHARED_BY_TYPE, &ti_dac_powerdown_mode), + { }, +}; + +#define TI_DAC_CHANNEL(chan) { \ + .type = IIO_VOLTAGE, \ + .channel = (chan), \ + .output = true, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = ti_dac_ext_info, \ +} + +static const struct iio_chan_spec ti_dac_channels[] = { + TI_DAC_CHANNEL(0), +}; + +static int ti_dac_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ti_dac_chip *ti_dac = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + *val = ti_dac->val; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + ret = regulator_get_voltage(ti_dac->vref); + if (ret < 0) + return ret; + + *val = ret / 1000; + *val2 = ti_dac->resolution; + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +} + +static int ti_dac_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ti_dac_chip *ti_dac = iio_priv(indio_dev); + u8 power = ti_dac_get_power(ti_dac, ti_dac->powerdown); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (ti_dac->val == val) + return 0; + + if (val >= (1 << ti_dac->resolution) || val < 0) + return -EINVAL; + + if (ti_dac->powerdown) + return -EBUSY; + + mutex_lock(&ti_dac->lock); + ret = ti_dac_cmd(ti_dac, power, val); + if (!ret) + ti_dac->val = val; + mutex_unlock(&ti_dac->lock); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static int ti_dac_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, long mask) +{ + return IIO_VAL_INT; +} + +static const struct iio_info ti_dac_info = { + .read_raw = ti_dac_read_raw, + .write_raw = ti_dac_write_raw, + .write_raw_get_fmt = ti_dac_write_raw_get_fmt, +}; + +static int ti_dac_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + const struct ti_dac_spec *spec; + struct ti_dac_chip *ti_dac; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*ti_dac)); + if (!indio_dev) { + dev_err(dev, "can not allocate iio device\n"); + return -ENOMEM; + } + + spi->mode = SPI_MODE_1; + spi->bits_per_word = 16; + spi_setup(spi); + + indio_dev->info = &ti_dac_info; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ti_dac_channels; + spi_set_drvdata(spi, indio_dev); + + ti_dac = iio_priv(indio_dev); + ti_dac->powerdown = false; + ti_dac->spi = spi; + + spec = &ti_dac_spec[spi_get_device_id(spi)->driver_data]; + indio_dev->num_channels = 1; + ti_dac->resolution = spec->resolution; + + ti_dac->vref = devm_regulator_get(dev, "vref"); + if (IS_ERR(ti_dac->vref)) + return dev_err_probe(dev, PTR_ERR(ti_dac->vref), + "error to get regulator\n"); + + ret = regulator_enable(ti_dac->vref); + if (ret < 0) { + dev_err(dev, "can not enable regulator\n"); + return ret; + } + + mutex_init(&ti_dac->lock); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "fail to register iio device: %d\n", ret); + goto err; + } + + return 0; + +err: + mutex_destroy(&ti_dac->lock); + regulator_disable(ti_dac->vref); + return ret; +} + +static void ti_dac_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ti_dac_chip *ti_dac = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + mutex_destroy(&ti_dac->lock); + regulator_disable(ti_dac->vref); +} + +static const struct of_device_id ti_dac_of_id[] = { + { .compatible = "ti,dac5311" }, + { .compatible = "ti,dac6311" }, + { .compatible = "ti,dac7311" }, + { } +}; +MODULE_DEVICE_TABLE(of, ti_dac_of_id); + +static const struct spi_device_id ti_dac_spi_id[] = { + { "dac5311", ID_DAC5311 }, + { "dac6311", ID_DAC6311 }, + { "dac7311", ID_DAC7311 }, + { } +}; +MODULE_DEVICE_TABLE(spi, ti_dac_spi_id); + +static struct spi_driver ti_dac_driver = { + .driver = { + .name = "ti-dac7311", + .of_match_table = ti_dac_of_id, + }, + .probe = ti_dac_probe, + .remove = ti_dac_remove, + .id_table = ti_dac_spi_id, +}; +module_spi_driver(ti_dac_driver); + +MODULE_AUTHOR("Charles-Antoine Couret "); +MODULE_DESCRIPTION("Texas Instruments 8/10/12-bit 1-channel DAC driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3