From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/humidity/hts221_buffer.c | 205 +++++++++++++++++++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 drivers/iio/humidity/hts221_buffer.c (limited to 'drivers/iio/humidity/hts221_buffer.c') diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c new file mode 100644 index 000000000..2a4107a79 --- /dev/null +++ b/drivers/iio/humidity/hts221_buffer.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics hts221 sensor driver + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "hts221.h" + +#define HTS221_REG_DRDY_HL_ADDR 0x22 +#define HTS221_REG_DRDY_HL_MASK BIT(7) +#define HTS221_REG_DRDY_PP_OD_ADDR 0x22 +#define HTS221_REG_DRDY_PP_OD_MASK BIT(6) +#define HTS221_REG_DRDY_EN_ADDR 0x22 +#define HTS221_REG_DRDY_EN_MASK BIT(2) +#define HTS221_REG_STATUS_ADDR 0x27 +#define HTS221_RH_DRDY_MASK BIT(1) +#define HTS221_TEMP_DRDY_MASK BIT(0) + +static int hts221_trig_set_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *iio_dev = iio_trigger_get_drvdata(trig); + struct hts221_hw *hw = iio_priv(iio_dev); + + return regmap_update_bits(hw->regmap, HTS221_REG_DRDY_EN_ADDR, + HTS221_REG_DRDY_EN_MASK, + FIELD_PREP(HTS221_REG_DRDY_EN_MASK, state)); +} + +static const struct iio_trigger_ops hts221_trigger_ops = { + .set_trigger_state = hts221_trig_set_state, +}; + +static irqreturn_t hts221_trigger_handler_thread(int irq, void *private) +{ + struct hts221_hw *hw = private; + int err, status; + + err = regmap_read(hw->regmap, HTS221_REG_STATUS_ADDR, &status); + if (err < 0) + return IRQ_HANDLED; + + /* + * H_DA bit (humidity data available) is routed to DRDY line. + * Humidity sample is computed after temperature one. + * Here we can assume data channels are both available if H_DA bit + * is set in status register + */ + if (!(status & HTS221_RH_DRDY_MASK)) + return IRQ_NONE; + + iio_trigger_poll_chained(hw->trig); + + return IRQ_HANDLED; +} + +int hts221_allocate_trigger(struct iio_dev *iio_dev) +{ + struct hts221_hw *hw = iio_priv(iio_dev); + struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev); + bool irq_active_low = false, open_drain = false; + unsigned long irq_type; + int err; + + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); + + switch (irq_type) { + case IRQF_TRIGGER_HIGH: + case IRQF_TRIGGER_RISING: + break; + case IRQF_TRIGGER_LOW: + case IRQF_TRIGGER_FALLING: + irq_active_low = true; + break; + default: + dev_info(hw->dev, + "mode %lx unsupported, using IRQF_TRIGGER_RISING\n", + irq_type); + irq_type = IRQF_TRIGGER_RISING; + break; + } + + err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_HL_ADDR, + HTS221_REG_DRDY_HL_MASK, + FIELD_PREP(HTS221_REG_DRDY_HL_MASK, + irq_active_low)); + if (err < 0) + return err; + + if (device_property_read_bool(hw->dev, "drive-open-drain") || + (pdata && pdata->open_drain)) { + irq_type |= IRQF_SHARED; + open_drain = true; + } + + err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_PP_OD_ADDR, + HTS221_REG_DRDY_PP_OD_MASK, + FIELD_PREP(HTS221_REG_DRDY_PP_OD_MASK, + open_drain)); + if (err < 0) + return err; + + err = devm_request_threaded_irq(hw->dev, hw->irq, NULL, + hts221_trigger_handler_thread, + irq_type | IRQF_ONESHOT, + hw->name, hw); + if (err) { + dev_err(hw->dev, "failed to request trigger irq %d\n", + hw->irq); + return err; + } + + hw->trig = devm_iio_trigger_alloc(hw->dev, "%s-trigger", + iio_dev->name); + if (!hw->trig) + return -ENOMEM; + + iio_trigger_set_drvdata(hw->trig, iio_dev); + hw->trig->ops = &hts221_trigger_ops; + + err = devm_iio_trigger_register(hw->dev, hw->trig); + + iio_dev->trig = iio_trigger_get(hw->trig); + + return err; +} + +static int hts221_buffer_preenable(struct iio_dev *iio_dev) +{ + return hts221_set_enable(iio_priv(iio_dev), true); +} + +static int hts221_buffer_postdisable(struct iio_dev *iio_dev) +{ + return hts221_set_enable(iio_priv(iio_dev), false); +} + +static const struct iio_buffer_setup_ops hts221_buffer_ops = { + .preenable = hts221_buffer_preenable, + .postdisable = hts221_buffer_postdisable, +}; + +static irqreturn_t hts221_buffer_handler_thread(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio_dev = pf->indio_dev; + struct hts221_hw *hw = iio_priv(iio_dev); + struct iio_chan_spec const *ch; + int err; + + /* humidity data */ + ch = &iio_dev->channels[HTS221_SENSOR_H]; + err = regmap_bulk_read(hw->regmap, ch->address, + &hw->scan.channels[0], + sizeof(hw->scan.channels[0])); + if (err < 0) + goto out; + + /* temperature data */ + ch = &iio_dev->channels[HTS221_SENSOR_T]; + err = regmap_bulk_read(hw->regmap, ch->address, + &hw->scan.channels[1], + sizeof(hw->scan.channels[1])); + if (err < 0) + goto out; + + iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan, + iio_get_time_ns(iio_dev)); + +out: + iio_trigger_notify_done(hw->trig); + + return IRQ_HANDLED; +} + +int hts221_allocate_buffers(struct iio_dev *iio_dev) +{ + struct hts221_hw *hw = iio_priv(iio_dev); + return devm_iio_triggered_buffer_setup(hw->dev, iio_dev, + NULL, hts221_buffer_handler_thread, + &hts221_buffer_ops); +} + +MODULE_AUTHOR("Lorenzo Bianconi "); +MODULE_DESCRIPTION("STMicroelectronics hts221 buffer driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3