From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/imu/st_lsm9ds0/Kconfig | 44 +++++++++++++ drivers/iio/imu/st_lsm9ds0/Makefile | 5 ++ drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 22 +++++++ drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 99 ++++++++++++++++++++++++++++ drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 80 ++++++++++++++++++++++ drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 79 ++++++++++++++++++++++ 6 files changed, 329 insertions(+) create mode 100644 drivers/iio/imu/st_lsm9ds0/Kconfig create mode 100644 drivers/iio/imu/st_lsm9ds0/Makefile create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c (limited to 'drivers/iio/imu/st_lsm9ds0') diff --git a/drivers/iio/imu/st_lsm9ds0/Kconfig b/drivers/iio/imu/st_lsm9ds0/Kconfig new file mode 100644 index 000000000..d29558ede --- /dev/null +++ b/drivers/iio/imu/st_lsm9ds0/Kconfig @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config IIO_ST_LSM9DS0 + tristate "STMicroelectronics LSM9DS0 IMU driver" + depends on (I2C || SPI_MASTER) && SYSFS + depends on !SENSORS_LIS3_I2C + depends on !SENSORS_LIS3_SPI + select IIO_ST_ACCEL_3AXIS + select IIO_ST_MAGN_3AXIS + + help + Say yes here to build support for STMicroelectronics LSM9DS0 IMU + sensor. Supported devices: accelerometer/magnetometer of lsm9ds0. + + To compile this driver as a module, choose M here: the module + will be called st_lsm9ds0. + + Also need to enable at least one of I2C and SPI interface drivers + +config IIO_ST_LSM9DS0_I2C + tristate "STMicroelectronics LSM9DS0 IMU I2C interface" + depends on I2C && IIO_ST_LSM9DS0 + default I2C && IIO_ST_LSM9DS0 + select IIO_ST_ACCEL_I2C_3AXIS + select IIO_ST_MAGN_I2C_3AXIS + select REGMAP_I2C + help + Build support for STMicroelectronics LSM9DS0 IMU I2C interface. + + To compile this driver as a module, choose M here. The module + will be called st_lsm9ds0_i2c. + +config IIO_ST_LSM9DS0_SPI + tristate "STMicroelectronics LSM9DS0 IMU SPI interface" + depends on SPI_MASTER && IIO_ST_LSM9DS0 + default SPI_MASTER && IIO_ST_LSM9DS0 + select IIO_ST_ACCEL_SPI_3AXIS + select IIO_ST_MAGN_SPI_3AXIS + select REGMAP_SPI + help + Build support for STMicroelectronics LSM9DS0 IMU I2C interface. + + To compile this driver as a module, choose M here. The module + will be called st_lsm9ds0_spi. diff --git a/drivers/iio/imu/st_lsm9ds0/Makefile b/drivers/iio/imu/st_lsm9ds0/Makefile new file mode 100644 index 000000000..488af523f --- /dev/null +++ b/drivers/iio/imu/st_lsm9ds0/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_IIO_ST_LSM9DS0) += st_lsm9ds0.o +st_lsm9ds0-y := st_lsm9ds0_core.o +obj-$(CONFIG_IIO_ST_LSM9DS0_I2C) += st_lsm9ds0_i2c.o +obj-$(CONFIG_IIO_ST_LSM9DS0_SPI) += st_lsm9ds0_spi.o diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h new file mode 100644 index 000000000..76678cdef --- /dev/null +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +// STMicroelectronics LSM9DS0 IMU driver + +#ifndef ST_LSM9DS0_H +#define ST_LSM9DS0_H + +struct iio_dev; +struct regulator; + +struct st_lsm9ds0 { + struct device *dev; + const char *name; + int irq; + struct iio_dev *accel; + struct iio_dev *magn; + struct regulator *vdd; + struct regulator *vdd_io; +}; + +int st_lsm9ds0_probe(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap); + +#endif /* ST_LSM9DS0_H */ diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c new file mode 100644 index 000000000..e887b45cd --- /dev/null +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics LSM9DS0 IMU driver + * + * Copyright (C) 2021, Intel Corporation + * + * Author: Andy Shevchenko + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "st_lsm9ds0.h" + +static int st_lsm9ds0_probe_accel(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap) +{ + const struct st_sensor_settings *settings; + struct device *dev = lsm9ds0->dev; + struct st_sensor_data *data; + + settings = st_accel_get_settings(lsm9ds0->name); + if (!settings) { + dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name); + return -ENODEV; + } + + lsm9ds0->accel = devm_iio_device_alloc(dev, sizeof(*data)); + if (!lsm9ds0->accel) + return -ENOMEM; + + lsm9ds0->accel->name = lsm9ds0->name; + + data = iio_priv(lsm9ds0->accel); + data->sensor_settings = (struct st_sensor_settings *)settings; + data->irq = lsm9ds0->irq; + data->regmap = regmap; + + return st_accel_common_probe(lsm9ds0->accel); +} + +static int st_lsm9ds0_probe_magn(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap) +{ + const struct st_sensor_settings *settings; + struct device *dev = lsm9ds0->dev; + struct st_sensor_data *data; + + settings = st_magn_get_settings(lsm9ds0->name); + if (!settings) { + dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name); + return -ENODEV; + } + + lsm9ds0->magn = devm_iio_device_alloc(dev, sizeof(*data)); + if (!lsm9ds0->magn) + return -ENOMEM; + + lsm9ds0->magn->name = lsm9ds0->name; + + data = iio_priv(lsm9ds0->magn); + data->sensor_settings = (struct st_sensor_settings *)settings; + data->irq = lsm9ds0->irq; + data->regmap = regmap; + + return st_magn_common_probe(lsm9ds0->magn); +} + +int st_lsm9ds0_probe(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap) +{ + struct device *dev = lsm9ds0->dev; + static const char * const regulator_names[] = { "vdd", "vddio" }; + int ret; + + /* Regulators not mandatory, but if requested we should enable them. */ + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names), + regulator_names); + if (ret) + return dev_err_probe(dev, ret, + "unable to enable Vdd supply\n"); + + /* Setup accelerometer device */ + ret = st_lsm9ds0_probe_accel(lsm9ds0, regmap); + if (ret) + return ret; + + /* Setup magnetometer device */ + return st_lsm9ds0_probe_magn(lsm9ds0, regmap); +} +EXPORT_SYMBOL_NS_GPL(st_lsm9ds0_probe, IIO_ST_SENSORS); + +MODULE_AUTHOR("Andy Shevchenko "); +MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU core driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ST_SENSORS); diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c new file mode 100644 index 000000000..a90138d8b --- /dev/null +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics LSM9DS0 IMU driver + * + * Copyright (C) 2021, Intel Corporation + * + * Author: Andy Shevchenko + */ + +#include +#include +#include +#include +#include + +#include + +#include "st_lsm9ds0.h" + +static const struct of_device_id st_lsm9ds0_of_match[] = { + { + .compatible = "st,lsm9ds0-imu", + .data = LSM9DS0_IMU_DEV_NAME, + }, + {} +}; +MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match); + +static const struct i2c_device_id st_lsm9ds0_id_table[] = { + { LSM9DS0_IMU_DEV_NAME }, + {} +}; +MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table); + +static const struct regmap_config st_lsm9ds0_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = 0x80, +}; + +static int st_lsm9ds0_i2c_probe(struct i2c_client *client) +{ + const struct regmap_config *config = &st_lsm9ds0_regmap_config; + struct device *dev = &client->dev; + struct st_lsm9ds0 *lsm9ds0; + struct regmap *regmap; + + st_sensors_dev_name_probe(dev, client->name, sizeof(client->name)); + + lsm9ds0 = devm_kzalloc(dev, sizeof(*lsm9ds0), GFP_KERNEL); + if (!lsm9ds0) + return -ENOMEM; + + lsm9ds0->dev = dev; + lsm9ds0->name = client->name; + lsm9ds0->irq = client->irq; + + regmap = devm_regmap_init_i2c(client, config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + i2c_set_clientdata(client, lsm9ds0); + + return st_lsm9ds0_probe(lsm9ds0, regmap); +} + +static struct i2c_driver st_lsm9ds0_driver = { + .driver = { + .name = "st-lsm9ds0-i2c", + .of_match_table = st_lsm9ds0_of_match, + }, + .probe_new = st_lsm9ds0_i2c_probe, + .id_table = st_lsm9ds0_id_table, +}; +module_i2c_driver(st_lsm9ds0_driver); + +MODULE_AUTHOR("Andy Shevchenko "); +MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU I2C driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ST_SENSORS); diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c new file mode 100644 index 000000000..b743bf354 --- /dev/null +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics LSM9DS0 IMU driver + * + * Copyright (C) 2021, Intel Corporation + * + * Author: Andy Shevchenko + */ + +#include +#include +#include +#include +#include + +#include + +#include "st_lsm9ds0.h" + +static const struct of_device_id st_lsm9ds0_of_match[] = { + { + .compatible = "st,lsm9ds0-imu", + .data = LSM9DS0_IMU_DEV_NAME, + }, + {} +}; +MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match); + +static const struct spi_device_id st_lsm9ds0_id_table[] = { + { LSM9DS0_IMU_DEV_NAME }, + {} +}; +MODULE_DEVICE_TABLE(spi, st_lsm9ds0_id_table); + +static const struct regmap_config st_lsm9ds0_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = 0xc0, +}; + +static int st_lsm9ds0_spi_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct st_lsm9ds0 *lsm9ds0; + struct regmap *regmap; + + st_sensors_dev_name_probe(dev, spi->modalias, sizeof(spi->modalias)); + + lsm9ds0 = devm_kzalloc(dev, sizeof(*lsm9ds0), GFP_KERNEL); + if (!lsm9ds0) + return -ENOMEM; + + lsm9ds0->dev = dev; + lsm9ds0->name = spi->modalias; + lsm9ds0->irq = spi->irq; + + regmap = devm_regmap_init_spi(spi, &st_lsm9ds0_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + spi_set_drvdata(spi, lsm9ds0); + + return st_lsm9ds0_probe(lsm9ds0, regmap); +} + +static struct spi_driver st_lsm9ds0_driver = { + .driver = { + .name = "st-lsm9ds0-spi", + .of_match_table = st_lsm9ds0_of_match, + }, + .probe = st_lsm9ds0_spi_probe, + .id_table = st_lsm9ds0_id_table, +}; +module_spi_driver(st_lsm9ds0_driver); + +MODULE_AUTHOR("Andy Shevchenko "); +MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU SPI driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ST_SENSORS); -- cgit v1.2.3