From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/light/cm3232.c | 428 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 428 insertions(+) create mode 100644 drivers/iio/light/cm3232.c (limited to 'drivers/iio/light/cm3232.c') diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c new file mode 100644 index 000000000..43e492f50 --- /dev/null +++ b/drivers/iio/light/cm3232.c @@ -0,0 +1,428 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CM3232 Ambient Light Sensor + * + * Copyright (C) 2014-2015 Capella Microsystems Inc. + * Author: Kevin Tsai + * + * IIO driver for CM3232 (7-bit I2C slave address 0x10). + */ + +#include +#include +#include +#include +#include +#include + +/* Registers Address */ +#define CM3232_REG_ADDR_CMD 0x00 +#define CM3232_REG_ADDR_ALS 0x50 +#define CM3232_REG_ADDR_ID 0x53 + +#define CM3232_CMD_ALS_DISABLE BIT(0) + +#define CM3232_CMD_ALS_IT_SHIFT 2 +#define CM3232_CMD_ALS_IT_MASK (BIT(2) | BIT(3) | BIT(4)) +#define CM3232_CMD_ALS_IT_DEFAULT (0x01 << CM3232_CMD_ALS_IT_SHIFT) + +#define CM3232_CMD_ALS_RESET BIT(6) + +#define CM3232_CMD_DEFAULT CM3232_CMD_ALS_IT_DEFAULT + +#define CM3232_HW_ID 0x32 +#define CM3232_CALIBSCALE_DEFAULT 100000 +#define CM3232_CALIBSCALE_RESOLUTION 100000 +#define CM3232_MLUX_PER_LUX 1000 + +#define CM3232_MLUX_PER_BIT_DEFAULT 64 +#define CM3232_MLUX_PER_BIT_BASE_IT 100000 + +static const struct { + int val; + int val2; + u8 it; +} cm3232_als_it_scales[] = { + {0, 100000, 0}, /* 0.100000 */ + {0, 200000, 1}, /* 0.200000 */ + {0, 400000, 2}, /* 0.400000 */ + {0, 800000, 3}, /* 0.800000 */ + {1, 600000, 4}, /* 1.600000 */ + {3, 200000, 5}, /* 3.200000 */ +}; + +struct cm3232_als_info { + u8 regs_cmd_default; + u8 hw_id; + int calibscale; + int mlux_per_bit; + int mlux_per_bit_base_it; +}; + +static struct cm3232_als_info cm3232_als_info_default = { + .regs_cmd_default = CM3232_CMD_DEFAULT, + .hw_id = CM3232_HW_ID, + .calibscale = CM3232_CALIBSCALE_DEFAULT, + .mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT, + .mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT, +}; + +struct cm3232_chip { + struct i2c_client *client; + struct cm3232_als_info *als_info; + u8 regs_cmd; + u16 regs_als; +}; + +/** + * cm3232_reg_init() - Initialize CM3232 + * @chip: pointer of struct cm3232_chip. + * + * Check and initialize CM3232 ambient light sensor. + * + * Return: 0 for success; otherwise for error code. + */ +static int cm3232_reg_init(struct cm3232_chip *chip) +{ + struct i2c_client *client = chip->client; + s32 ret; + + chip->als_info = &cm3232_als_info_default; + + /* Identify device */ + ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID); + if (ret < 0) { + dev_err(&chip->client->dev, "Error reading addr_id\n"); + return ret; + } + + if ((ret & 0xFF) != chip->als_info->hw_id) + return -ENODEV; + + /* Disable and reset device */ + chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET; + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, + chip->regs_cmd); + if (ret < 0) { + dev_err(&chip->client->dev, "Error writing reg_cmd\n"); + return ret; + } + + /* Register default value */ + chip->regs_cmd = chip->als_info->regs_cmd_default; + + /* Configure register */ + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, + chip->regs_cmd); + if (ret < 0) + dev_err(&chip->client->dev, "Error writing reg_cmd\n"); + + return ret; +} + +/** + * cm3232_read_als_it() - Get sensor integration time + * @chip: pointer of struct cm3232_chip + * @val: pointer of int to load the integration (sec). + * @val2: pointer of int to load the integration time (microsecond). + * + * Report the current integration time. + * + * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL. + */ +static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2) +{ + u16 als_it; + int i; + + als_it = chip->regs_cmd; + als_it &= CM3232_CMD_ALS_IT_MASK; + als_it >>= CM3232_CMD_ALS_IT_SHIFT; + for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) { + if (als_it == cm3232_als_it_scales[i].it) { + *val = cm3232_als_it_scales[i].val; + *val2 = cm3232_als_it_scales[i].val2; + return IIO_VAL_INT_PLUS_MICRO; + } + } + + return -EINVAL; +} + +/** + * cm3232_write_als_it() - Write sensor integration time + * @chip: pointer of struct cm3232_chip. + * @val: integration time in second. + * @val2: integration time in microsecond. + * + * Convert integration time to sensor value. + * + * Return: i2c_smbus_write_byte_data command return value. + */ +static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2) +{ + struct i2c_client *client = chip->client; + u16 als_it, cmd; + int i; + s32 ret; + + for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) { + if (val == cm3232_als_it_scales[i].val && + val2 == cm3232_als_it_scales[i].val2) { + + als_it = cm3232_als_it_scales[i].it; + als_it <<= CM3232_CMD_ALS_IT_SHIFT; + + cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK; + cmd |= als_it; + ret = i2c_smbus_write_byte_data(client, + CM3232_REG_ADDR_CMD, + cmd); + if (ret < 0) + return ret; + chip->regs_cmd = cmd; + return 0; + } + } + return -EINVAL; +} + +/** + * cm3232_get_lux() - report current lux value + * @chip: pointer of struct cm3232_chip. + * + * Convert sensor data to lux. It depends on integration + * time and calibscale variable. + * + * Return: Zero or positive value is lux, otherwise error code. + */ +static int cm3232_get_lux(struct cm3232_chip *chip) +{ + struct i2c_client *client = chip->client; + struct cm3232_als_info *als_info = chip->als_info; + int ret; + int val, val2; + int als_it; + u64 lux; + + /* Calculate mlux per bit based on als_it */ + ret = cm3232_read_als_it(chip, &val, &val2); + if (ret < 0) + return -EINVAL; + als_it = val * 1000000 + val2; + lux = (__force u64)als_info->mlux_per_bit; + lux *= als_info->mlux_per_bit_base_it; + lux = div_u64(lux, als_it); + + ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ALS); + if (ret < 0) { + dev_err(&client->dev, "Error reading reg_addr_als\n"); + return ret; + } + + chip->regs_als = (u16)ret; + lux *= chip->regs_als; + lux *= als_info->calibscale; + lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION); + lux = div_u64(lux, CM3232_MLUX_PER_LUX); + + if (lux > 0xFFFF) + lux = 0xFFFF; + + return (int)lux; +} + +static int cm3232_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct cm3232_chip *chip = iio_priv(indio_dev); + struct cm3232_als_info *als_info = chip->als_info; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ret = cm3232_get_lux(chip); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBSCALE: + *val = als_info->calibscale; + return IIO_VAL_INT; + case IIO_CHAN_INFO_INT_TIME: + return cm3232_read_als_it(chip, val, val2); + } + + return -EINVAL; +} + +static int cm3232_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct cm3232_chip *chip = iio_priv(indio_dev); + struct cm3232_als_info *als_info = chip->als_info; + + switch (mask) { + case IIO_CHAN_INFO_CALIBSCALE: + als_info->calibscale = val; + return 0; + case IIO_CHAN_INFO_INT_TIME: + return cm3232_write_als_it(chip, val, val2); + } + + return -EINVAL; +} + +/** + * cm3232_get_it_available() - Get available ALS IT value + * @dev: pointer of struct device. + * @attr: pointer of struct device_attribute. + * @buf: pointer of return string buffer. + * + * Display the available integration time in second. + * + * Return: string length. + */ +static ssize_t cm3232_get_it_available(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int i, len; + + for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ", + cm3232_als_it_scales[i].val, + cm3232_als_it_scales[i].val2); + return len + scnprintf(buf + len, PAGE_SIZE - len, "\n"); +} + +static const struct iio_chan_spec cm3232_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = + BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_INT_TIME), + } +}; + +static IIO_DEVICE_ATTR(in_illuminance_integration_time_available, + S_IRUGO, cm3232_get_it_available, NULL, 0); + +static struct attribute *cm3232_attributes[] = { + &iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group cm3232_attribute_group = { + .attrs = cm3232_attributes +}; + +static const struct iio_info cm3232_info = { + .read_raw = &cm3232_read_raw, + .write_raw = &cm3232_write_raw, + .attrs = &cm3232_attribute_group, +}; + +static int cm3232_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct cm3232_chip *chip; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + chip->client = client; + + indio_dev->channels = cm3232_channels; + indio_dev->num_channels = ARRAY_SIZE(cm3232_channels); + indio_dev->info = &cm3232_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = cm3232_reg_init(chip); + if (ret) { + dev_err(&client->dev, + "%s: register init failed\n", + __func__); + return ret; + } + + return iio_device_register(indio_dev); +} + +static void cm3232_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, + CM3232_CMD_ALS_DISABLE); + + iio_device_unregister(indio_dev); +} + +static const struct i2c_device_id cm3232_id[] = { + {"cm3232", 0}, + {} +}; + +static int cm3232_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct cm3232_chip *chip = iio_priv(indio_dev); + struct i2c_client *client = chip->client; + int ret; + + chip->regs_cmd |= CM3232_CMD_ALS_DISABLE; + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, + chip->regs_cmd); + + return ret; +} + +static int cm3232_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct cm3232_chip *chip = iio_priv(indio_dev); + struct i2c_client *client = chip->client; + int ret; + + chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE; + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, + chip->regs_cmd | CM3232_CMD_ALS_RESET); + + return ret; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(cm3232_pm_ops, cm3232_suspend, cm3232_resume); + +MODULE_DEVICE_TABLE(i2c, cm3232_id); + +static const struct of_device_id cm3232_of_match[] = { + {.compatible = "capella,cm3232"}, + {} +}; +MODULE_DEVICE_TABLE(of, cm3232_of_match); + +static struct i2c_driver cm3232_driver = { + .driver = { + .name = "cm3232", + .of_match_table = cm3232_of_match, + .pm = pm_sleep_ptr(&cm3232_pm_ops), + }, + .id_table = cm3232_id, + .probe_new = cm3232_probe, + .remove = cm3232_remove, +}; + +module_i2c_driver(cm3232_driver); + +MODULE_AUTHOR("Kevin Tsai "); +MODULE_DESCRIPTION("CM3232 ambient light sensor driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3