From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/orientation/Kconfig | 30 ++ drivers/iio/orientation/Makefile | 8 + drivers/iio/orientation/hid-sensor-incl-3d.c | 422 ++++++++++++++++++++++++++ drivers/iio/orientation/hid-sensor-rotation.c | 374 +++++++++++++++++++++++ 4 files changed, 834 insertions(+) create mode 100644 drivers/iio/orientation/Kconfig create mode 100644 drivers/iio/orientation/Makefile create mode 100644 drivers/iio/orientation/hid-sensor-incl-3d.c create mode 100644 drivers/iio/orientation/hid-sensor-rotation.c (limited to 'drivers/iio/orientation') diff --git a/drivers/iio/orientation/Kconfig b/drivers/iio/orientation/Kconfig new file mode 100644 index 000000000..396cbbb86 --- /dev/null +++ b/drivers/iio/orientation/Kconfig @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Inclinometer sensors +# +# When adding new entries keep the list in alphabetical order + +menu "Inclinometer sensors" + +config HID_SENSOR_INCLINOMETER_3D + depends on HID_SENSOR_HUB + select IIO_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Inclinometer 3D" + help + Say yes here to build support for the HID SENSOR + Inclinometer 3D. + +config HID_SENSOR_DEVICE_ROTATION + depends on HID_SENSOR_HUB + select IIO_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Device Rotation" + help + Say yes here to build support for the HID SENSOR + device rotation. The output of a device rotation sensor + is presented using quaternion format. + +endmenu diff --git a/drivers/iio/orientation/Makefile b/drivers/iio/orientation/Makefile new file mode 100644 index 000000000..7800ed293 --- /dev/null +++ b/drivers/iio/orientation/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for industrial I/O Inclinometer sensor drivers +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_HID_SENSOR_INCLINOMETER_3D) += hid-sensor-incl-3d.o +obj-$(CONFIG_HID_SENSOR_DEVICE_ROTATION) += hid-sensor-rotation.o diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c new file mode 100644 index 000000000..ba5b581d5 --- /dev/null +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * HID Sensors Driver + * Copyright (c) 2013, Intel Corporation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../common/hid-sensors/hid-sensor-trigger.h" + +enum incl_3d_channel { + CHANNEL_SCAN_INDEX_X, + CHANNEL_SCAN_INDEX_Y, + CHANNEL_SCAN_INDEX_Z, + INCLI_3D_CHANNEL_MAX, +}; + +#define CHANNEL_SCAN_INDEX_TIMESTAMP INCLI_3D_CHANNEL_MAX + +struct incl_3d_state { + struct hid_sensor_hub_callbacks callbacks; + struct hid_sensor_common common_attributes; + struct hid_sensor_hub_attribute_info incl[INCLI_3D_CHANNEL_MAX]; + struct { + u32 incl_val[INCLI_3D_CHANNEL_MAX]; + u64 timestamp __aligned(8); + } scan; + int scale_pre_decml; + int scale_post_decml; + int scale_precision; + int value_offset; + s64 timestamp; +}; + +static const u32 incl_3d_addresses[INCLI_3D_CHANNEL_MAX] = { + HID_USAGE_SENSOR_ORIENT_TILT_X, + HID_USAGE_SENSOR_ORIENT_TILT_Y, + HID_USAGE_SENSOR_ORIENT_TILT_Z +}; + +static const u32 incl_3d_sensitivity_addresses[] = { + HID_USAGE_SENSOR_DATA_ORIENTATION, + HID_USAGE_SENSOR_ORIENT_TILT, +}; + +/* Channel definitions */ +static const struct iio_chan_spec incl_3d_channels[] = { + { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_X, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_Y, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_Z, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_Z, + }, + IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP), +}; + +/* Adjust channel real bits based on report descriptor */ +static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan, + int size) +{ + chan->scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + chan->scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is u32 */ + chan->scan_type.storagebits = sizeof(u32) * 8; +} + +/* Channel read_raw handler */ +static int incl_3d_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct incl_3d_state *incl_state = iio_priv(indio_dev); + int report_id = -1; + u32 address; + int ret_type; + s32 min; + + *val = 0; + *val2 = 0; + switch (mask) { + case IIO_CHAN_INFO_RAW: + hid_sensor_power_state(&incl_state->common_attributes, true); + report_id = incl_state->incl[chan->scan_index].report_id; + min = incl_state->incl[chan->scan_index].logical_minimum; + address = incl_3d_addresses[chan->scan_index]; + if (report_id >= 0) + *val = sensor_hub_input_attr_get_raw_value( + incl_state->common_attributes.hsdev, + HID_USAGE_SENSOR_INCLINOMETER_3D, address, + report_id, + SENSOR_HUB_SYNC, + min < 0); + else { + hid_sensor_power_state(&incl_state->common_attributes, + false); + return -EINVAL; + } + hid_sensor_power_state(&incl_state->common_attributes, false); + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = incl_state->scale_pre_decml; + *val2 = incl_state->scale_post_decml; + ret_type = incl_state->scale_precision; + break; + case IIO_CHAN_INFO_OFFSET: + *val = incl_state->value_offset; + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret_type = hid_sensor_read_samp_freq_value( + &incl_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret_type = hid_sensor_read_raw_hyst_value( + &incl_state->common_attributes, val, val2); + break; + default: + ret_type = -EINVAL; + break; + } + + return ret_type; +} + +/* Channel write_raw handler */ +static int incl_3d_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct incl_3d_state *incl_state = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_write_samp_freq_value( + &incl_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_write_raw_hyst_value( + &incl_state->common_attributes, val, val2); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct iio_info incl_3d_info = { + .read_raw = &incl_3d_read_raw, + .write_raw = &incl_3d_write_raw, +}; + +/* Callback handler to send event after all samples are received and captured */ +static int incl_3d_proc_event(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct incl_3d_state *incl_state = iio_priv(indio_dev); + + dev_dbg(&indio_dev->dev, "incl_3d_proc_event\n"); + if (atomic_read(&incl_state->common_attributes.data_ready)) { + if (!incl_state->timestamp) + incl_state->timestamp = iio_get_time_ns(indio_dev); + + iio_push_to_buffers_with_timestamp(indio_dev, + &incl_state->scan, + incl_state->timestamp); + + incl_state->timestamp = 0; + } + + return 0; +} + +/* Capture samples in local storage */ +static int incl_3d_capture_sample(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + size_t raw_len, char *raw_data, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct incl_3d_state *incl_state = iio_priv(indio_dev); + int ret = 0; + + switch (usage_id) { + case HID_USAGE_SENSOR_ORIENT_TILT_X: + incl_state->scan.incl_val[CHANNEL_SCAN_INDEX_X] = *(u32 *)raw_data; + break; + case HID_USAGE_SENSOR_ORIENT_TILT_Y: + incl_state->scan.incl_val[CHANNEL_SCAN_INDEX_Y] = *(u32 *)raw_data; + break; + case HID_USAGE_SENSOR_ORIENT_TILT_Z: + incl_state->scan.incl_val[CHANNEL_SCAN_INDEX_Z] = *(u32 *)raw_data; + break; + case HID_USAGE_SENSOR_TIME_TIMESTAMP: + incl_state->timestamp = + hid_sensor_convert_timestamp(&incl_state->common_attributes, + *(s64 *)raw_data); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +/* Parse report which is specific to an usage id*/ +static int incl_3d_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + struct iio_chan_spec *channels, + unsigned usage_id, + struct incl_3d_state *st) +{ + int ret; + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ORIENT_TILT_X, + &st->incl[CHANNEL_SCAN_INDEX_X]); + if (ret) + return ret; + incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_X], + st->incl[CHANNEL_SCAN_INDEX_X].size); + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ORIENT_TILT_Y, + &st->incl[CHANNEL_SCAN_INDEX_Y]); + if (ret) + return ret; + incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Y], + st->incl[CHANNEL_SCAN_INDEX_Y].size); + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ORIENT_TILT_Z, + &st->incl[CHANNEL_SCAN_INDEX_Z]); + if (ret) + return ret; + incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Z], + st->incl[CHANNEL_SCAN_INDEX_Z].size); + + dev_dbg(&pdev->dev, "incl_3d %x:%x, %x:%x, %x:%x\n", + st->incl[0].index, + st->incl[0].report_id, + st->incl[1].index, st->incl[1].report_id, + st->incl[2].index, st->incl[2].report_id); + + st->scale_precision = hid_sensor_format_scale( + HID_USAGE_SENSOR_INCLINOMETER_3D, + &st->incl[CHANNEL_SCAN_INDEX_X], + &st->scale_pre_decml, &st->scale_post_decml); + + return ret; +} + +/* Function to initialize the processing for usage id */ +static int hid_incl_3d_probe(struct platform_device *pdev) +{ + int ret; + static char *name = "incli_3d"; + struct iio_dev *indio_dev; + struct incl_3d_state *incl_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct incl_3d_state)); + if (indio_dev == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, indio_dev); + + incl_state = iio_priv(indio_dev); + incl_state->common_attributes.hsdev = hsdev; + incl_state->common_attributes.pdev = pdev; + + ret = hid_sensor_parse_common_attributes(hsdev, + HID_USAGE_SENSOR_INCLINOMETER_3D, + &incl_state->common_attributes, + incl_3d_sensitivity_addresses, + ARRAY_SIZE(incl_3d_sensitivity_addresses)); + if (ret) { + dev_err(&pdev->dev, "failed to setup common attributes\n"); + return ret; + } + + indio_dev->channels = devm_kmemdup(&pdev->dev, incl_3d_channels, + sizeof(incl_3d_channels), GFP_KERNEL); + if (!indio_dev->channels) { + dev_err(&pdev->dev, "failed to duplicate channels\n"); + return -ENOMEM; + } + + ret = incl_3d_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, + HID_USAGE_SENSOR_INCLINOMETER_3D, + incl_state); + if (ret) { + dev_err(&pdev->dev, "failed to setup attributes\n"); + return ret; + } + + indio_dev->num_channels = ARRAY_SIZE(incl_3d_channels); + indio_dev->info = &incl_3d_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + + atomic_set(&incl_state->common_attributes.data_ready, 0); + + ret = hid_sensor_setup_trigger(indio_dev, name, + &incl_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "trigger setup failed\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "device register failed\n"); + goto error_remove_trigger; + } + + incl_state->callbacks.send_event = incl_3d_proc_event; + incl_state->callbacks.capture_sample = incl_3d_capture_sample; + incl_state->callbacks.pdev = pdev; + ret = sensor_hub_register_callback(hsdev, + HID_USAGE_SENSOR_INCLINOMETER_3D, + &incl_state->callbacks); + if (ret) { + dev_err(&pdev->dev, "callback reg failed\n"); + goto error_iio_unreg; + } + + return 0; + +error_iio_unreg: + iio_device_unregister(indio_dev); +error_remove_trigger: + hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes); + return ret; +} + +/* Function to deinitialize the processing for usage id */ +static int hid_incl_3d_remove(struct platform_device *pdev) +{ + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct incl_3d_state *incl_state = iio_priv(indio_dev); + + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D); + iio_device_unregister(indio_dev); + hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes); + + return 0; +} + +static const struct platform_device_id hid_incl_3d_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-200086", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_incl_3d_ids); + +static struct platform_driver hid_incl_3d_platform_driver = { + .id_table = hid_incl_3d_ids, + .driver = { + .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, + }, + .probe = hid_incl_3d_probe, + .remove = hid_incl_3d_remove, +}; +module_platform_driver(hid_incl_3d_platform_driver); + +MODULE_DESCRIPTION("HID Sensor Inclinometer 3D"); +MODULE_AUTHOR("Srinivas Pandruvada "); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HID); diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c new file mode 100644 index 000000000..a03369991 --- /dev/null +++ b/drivers/iio/orientation/hid-sensor-rotation.c @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * HID Sensors Driver + * Copyright (c) 2014, Intel Corporation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../common/hid-sensors/hid-sensor-trigger.h" + +struct dev_rot_state { + struct hid_sensor_hub_callbacks callbacks; + struct hid_sensor_common common_attributes; + struct hid_sensor_hub_attribute_info quaternion; + struct { + s32 sampled_vals[4] __aligned(16); + u64 timestamp __aligned(8); + } scan; + int scale_pre_decml; + int scale_post_decml; + int scale_precision; + int value_offset; + s64 timestamp; +}; + +static const u32 rotation_sensitivity_addresses[] = { + HID_USAGE_SENSOR_DATA_ORIENTATION, + HID_USAGE_SENSOR_ORIENT_QUATERNION, +}; + +/* Channel definitions */ +static const struct iio_chan_spec dev_rot_channels[] = { + { + .type = IIO_ROT, + .modified = 1, + .channel2 = IIO_MOD_QUATERNION, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = 0 + }, + IIO_CHAN_SOFT_TIMESTAMP(1) +}; + +/* Adjust channel real bits based on report descriptor */ +static void dev_rot_adjust_channel_bit_mask(struct iio_chan_spec *chan, + int size) +{ + chan->scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + chan->scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is u32 */ + chan->scan_type.storagebits = sizeof(u32) * 8; + chan->scan_type.repeat = 4; +} + +/* Channel read_raw handler */ +static int dev_rot_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int size, int *vals, int *val_len, + long mask) +{ + struct dev_rot_state *rot_state = iio_priv(indio_dev); + int ret_type; + int i; + + vals[0] = 0; + vals[1] = 0; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (size >= 4) { + for (i = 0; i < 4; ++i) + vals[i] = rot_state->scan.sampled_vals[i]; + ret_type = IIO_VAL_INT_MULTIPLE; + *val_len = 4; + } else + ret_type = -EINVAL; + break; + case IIO_CHAN_INFO_SCALE: + vals[0] = rot_state->scale_pre_decml; + vals[1] = rot_state->scale_post_decml; + return rot_state->scale_precision; + + case IIO_CHAN_INFO_OFFSET: + *vals = rot_state->value_offset; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SAMP_FREQ: + ret_type = hid_sensor_read_samp_freq_value( + &rot_state->common_attributes, &vals[0], &vals[1]); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret_type = hid_sensor_read_raw_hyst_value( + &rot_state->common_attributes, &vals[0], &vals[1]); + break; + default: + ret_type = -EINVAL; + break; + } + + return ret_type; +} + +/* Channel write_raw handler */ +static int dev_rot_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct dev_rot_state *rot_state = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_write_samp_freq_value( + &rot_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_write_raw_hyst_value( + &rot_state->common_attributes, val, val2); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct iio_info dev_rot_info = { + .read_raw_multi = &dev_rot_read_raw, + .write_raw = &dev_rot_write_raw, +}; + +/* Callback handler to send event after all samples are received and captured */ +static int dev_rot_proc_event(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct dev_rot_state *rot_state = iio_priv(indio_dev); + + dev_dbg(&indio_dev->dev, "dev_rot_proc_event\n"); + if (atomic_read(&rot_state->common_attributes.data_ready)) { + if (!rot_state->timestamp) + rot_state->timestamp = iio_get_time_ns(indio_dev); + + iio_push_to_buffers_with_timestamp(indio_dev, &rot_state->scan, + rot_state->timestamp); + + rot_state->timestamp = 0; + } + + return 0; +} + +/* Capture samples in local storage */ +static int dev_rot_capture_sample(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + size_t raw_len, char *raw_data, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct dev_rot_state *rot_state = iio_priv(indio_dev); + + if (usage_id == HID_USAGE_SENSOR_ORIENT_QUATERNION) { + if (raw_len / 4 == sizeof(s16)) { + rot_state->scan.sampled_vals[0] = ((s16 *)raw_data)[0]; + rot_state->scan.sampled_vals[1] = ((s16 *)raw_data)[1]; + rot_state->scan.sampled_vals[2] = ((s16 *)raw_data)[2]; + rot_state->scan.sampled_vals[3] = ((s16 *)raw_data)[3]; + } else { + memcpy(&rot_state->scan.sampled_vals, raw_data, + sizeof(rot_state->scan.sampled_vals)); + } + + dev_dbg(&indio_dev->dev, "Recd Quat len:%zu::%zu\n", raw_len, + sizeof(rot_state->scan.sampled_vals)); + } else if (usage_id == HID_USAGE_SENSOR_TIME_TIMESTAMP) { + rot_state->timestamp = hid_sensor_convert_timestamp(&rot_state->common_attributes, + *(s64 *)raw_data); + } + + return 0; +} + +/* Parse report which is specific to an usage id*/ +static int dev_rot_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + struct iio_chan_spec *channels, + unsigned usage_id, + struct dev_rot_state *st) +{ + int ret; + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ORIENT_QUATERNION, + &st->quaternion); + if (ret) + return ret; + + dev_rot_adjust_channel_bit_mask(&channels[0], + st->quaternion.size / 4); + + dev_dbg(&pdev->dev, "dev_rot %x:%x\n", st->quaternion.index, + st->quaternion.report_id); + + dev_dbg(&pdev->dev, "dev_rot: attrib size %d\n", + st->quaternion.size); + + st->scale_precision = hid_sensor_format_scale( + hsdev->usage, + &st->quaternion, + &st->scale_pre_decml, &st->scale_post_decml); + + return 0; +} + +/* Function to initialize the processing for usage id */ +static int hid_dev_rot_probe(struct platform_device *pdev) +{ + int ret; + char *name; + struct iio_dev *indio_dev; + struct dev_rot_state *rot_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct dev_rot_state)); + if (indio_dev == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, indio_dev); + + rot_state = iio_priv(indio_dev); + rot_state->common_attributes.hsdev = hsdev; + rot_state->common_attributes.pdev = pdev; + + switch (hsdev->usage) { + case HID_USAGE_SENSOR_DEVICE_ORIENTATION: + name = "dev_rotation"; + break; + case HID_USAGE_SENSOR_RELATIVE_ORIENTATION: + name = "relative_orientation"; + break; + case HID_USAGE_SENSOR_GEOMAGNETIC_ORIENTATION: + name = "geomagnetic_orientation"; + break; + default: + return -EINVAL; + } + + ret = hid_sensor_parse_common_attributes(hsdev, + hsdev->usage, + &rot_state->common_attributes, + rotation_sensitivity_addresses, + ARRAY_SIZE(rotation_sensitivity_addresses)); + if (ret) { + dev_err(&pdev->dev, "failed to setup common attributes\n"); + return ret; + } + + indio_dev->channels = devm_kmemdup(&pdev->dev, dev_rot_channels, + sizeof(dev_rot_channels), + GFP_KERNEL); + if (!indio_dev->channels) { + dev_err(&pdev->dev, "failed to duplicate channels\n"); + return -ENOMEM; + } + + ret = dev_rot_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, + hsdev->usage, rot_state); + if (ret) { + dev_err(&pdev->dev, "failed to setup attributes\n"); + return ret; + } + + indio_dev->num_channels = ARRAY_SIZE(dev_rot_channels); + indio_dev->info = &dev_rot_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + + atomic_set(&rot_state->common_attributes.data_ready, 0); + + ret = hid_sensor_setup_trigger(indio_dev, name, + &rot_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "trigger setup failed\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "device register failed\n"); + goto error_remove_trigger; + } + + rot_state->callbacks.send_event = dev_rot_proc_event; + rot_state->callbacks.capture_sample = dev_rot_capture_sample; + rot_state->callbacks.pdev = pdev; + ret = sensor_hub_register_callback(hsdev, hsdev->usage, + &rot_state->callbacks); + if (ret) { + dev_err(&pdev->dev, "callback reg failed\n"); + goto error_iio_unreg; + } + + return 0; + +error_iio_unreg: + iio_device_unregister(indio_dev); +error_remove_trigger: + hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes); + return ret; +} + +/* Function to deinitialize the processing for usage id */ +static int hid_dev_rot_remove(struct platform_device *pdev) +{ + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct dev_rot_state *rot_state = iio_priv(indio_dev); + + sensor_hub_remove_callback(hsdev, hsdev->usage); + iio_device_unregister(indio_dev); + hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes); + + return 0; +} + +static const struct platform_device_id hid_dev_rot_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-20008a", + }, + { + /* Relative orientation(AG) sensor */ + .name = "HID-SENSOR-20008e", + }, + { + /* Geomagnetic orientation(AM) sensor */ + .name = "HID-SENSOR-2000c1", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_dev_rot_ids); + +static struct platform_driver hid_dev_rot_platform_driver = { + .id_table = hid_dev_rot_ids, + .driver = { + .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, + }, + .probe = hid_dev_rot_probe, + .remove = hid_dev_rot_remove, +}; +module_platform_driver(hid_dev_rot_platform_driver); + +MODULE_DESCRIPTION("HID Sensor Device Rotation"); +MODULE_AUTHOR("Srinivas Pandruvada "); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HID); -- cgit v1.2.3