From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/pressure/bmp280.h | 207 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 207 insertions(+) create mode 100644 drivers/iio/pressure/bmp280.h (limited to 'drivers/iio/pressure/bmp280.h') diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h new file mode 100644 index 000000000..c791325c7 --- /dev/null +++ b/drivers/iio/pressure/bmp280.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include +#include +#include + +/* BMP380 specific registers */ +#define BMP380_REG_CMD 0x7E +#define BMP380_REG_CONFIG 0x1F +#define BMP380_REG_ODR 0x1D +#define BMP380_REG_OSR 0x1C +#define BMP380_REG_POWER_CONTROL 0x1B +#define BMP380_REG_IF_CONFIG 0x1A +#define BMP380_REG_INT_CONTROL 0x19 +#define BMP380_REG_INT_STATUS 0x11 +#define BMP380_REG_EVENT 0x10 +#define BMP380_REG_STATUS 0x03 +#define BMP380_REG_ERROR 0x02 +#define BMP380_REG_ID 0x00 + +#define BMP380_REG_FIFO_CONFIG_1 0x18 +#define BMP380_REG_FIFO_CONFIG_2 0x17 +#define BMP380_REG_FIFO_WATERMARK_MSB 0x16 +#define BMP380_REG_FIFO_WATERMARK_LSB 0x15 +#define BMP380_REG_FIFO_DATA 0x14 +#define BMP380_REG_FIFO_LENGTH_MSB 0x13 +#define BMP380_REG_FIFO_LENGTH_LSB 0x12 + +#define BMP380_REG_SENSOR_TIME_MSB 0x0E +#define BMP380_REG_SENSOR_TIME_LSB 0x0D +#define BMP380_REG_SENSOR_TIME_XLSB 0x0C + +#define BMP380_REG_TEMP_MSB 0x09 +#define BMP380_REG_TEMP_LSB 0x08 +#define BMP380_REG_TEMP_XLSB 0x07 + +#define BMP380_REG_PRESS_MSB 0x06 +#define BMP380_REG_PRESS_LSB 0x05 +#define BMP380_REG_PRESS_XLSB 0x04 + +#define BMP380_REG_CALIB_TEMP_START 0x31 +#define BMP380_CALIB_REG_COUNT 21 + +#define BMP380_FILTER_MASK GENMASK(3, 1) +#define BMP380_FILTER_OFF 0 +#define BMP380_FILTER_1X 1 +#define BMP380_FILTER_3X 2 +#define BMP380_FILTER_7X 3 +#define BMP380_FILTER_15X 4 +#define BMP380_FILTER_31X 5 +#define BMP380_FILTER_63X 6 +#define BMP380_FILTER_127X 7 + +#define BMP380_OSRS_TEMP_MASK GENMASK(5, 3) +#define BMP380_OSRS_PRESS_MASK GENMASK(2, 0) + +#define BMP380_ODRS_MASK GENMASK(4, 0) + +#define BMP380_CTRL_SENSORS_MASK GENMASK(1, 0) +#define BMP380_CTRL_SENSORS_PRESS_EN BIT(0) +#define BMP380_CTRL_SENSORS_TEMP_EN BIT(1) +#define BMP380_MODE_MASK GENMASK(5, 4) +#define BMP380_MODE_SLEEP 0 +#define BMP380_MODE_FORCED 1 +#define BMP380_MODE_NORMAL 3 + +#define BMP380_MIN_TEMP -4000 +#define BMP380_MAX_TEMP 8500 +#define BMP380_MIN_PRES 3000000 +#define BMP380_MAX_PRES 12500000 + +#define BMP380_CMD_NOOP 0x00 +#define BMP380_CMD_EXTMODE_EN_MID 0x34 +#define BMP380_CMD_FIFO_FLUSH 0xB0 +#define BMP380_CMD_SOFT_RESET 0xB6 + +#define BMP380_STATUS_CMD_RDY_MASK BIT(4) +#define BMP380_STATUS_DRDY_PRESS_MASK BIT(5) +#define BMP380_STATUS_DRDY_TEMP_MASK BIT(6) + +#define BMP380_ERR_FATAL_MASK BIT(0) +#define BMP380_ERR_CMD_MASK BIT(1) +#define BMP380_ERR_CONF_MASK BIT(2) + +#define BMP380_TEMP_SKIPPED 0x800000 +#define BMP380_PRESS_SKIPPED 0x800000 + +/* BMP280 specific registers */ +#define BMP280_REG_HUMIDITY_LSB 0xFE +#define BMP280_REG_HUMIDITY_MSB 0xFD +#define BMP280_REG_TEMP_XLSB 0xFC +#define BMP280_REG_TEMP_LSB 0xFB +#define BMP280_REG_TEMP_MSB 0xFA +#define BMP280_REG_PRESS_XLSB 0xF9 +#define BMP280_REG_PRESS_LSB 0xF8 +#define BMP280_REG_PRESS_MSB 0xF7 + +/* Helper mask to truncate excess 4 bits on pressure and temp readings */ +#define BMP280_MEAS_TRIM_MASK GENMASK(24, 4) + +#define BMP280_REG_CONFIG 0xF5 +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_STATUS 0xF3 +#define BMP280_REG_CTRL_HUMIDITY 0xF2 + +/* Due to non linear mapping, and data sizes we can't do a bulk read */ +#define BMP280_REG_COMP_H1 0xA1 +#define BMP280_REG_COMP_H2 0xE1 +#define BMP280_REG_COMP_H3 0xE3 +#define BMP280_REG_COMP_H4 0xE4 +#define BMP280_REG_COMP_H5 0xE5 +#define BMP280_REG_COMP_H6 0xE7 + +#define BMP280_REG_COMP_TEMP_START 0x88 +#define BMP280_COMP_TEMP_REG_COUNT 6 + +#define BMP280_REG_COMP_PRESS_START 0x8E +#define BMP280_COMP_PRESS_REG_COUNT 18 + +#define BMP280_COMP_H5_MASK GENMASK(15, 4) + +#define BMP280_CONTIGUOUS_CALIB_REGS (BMP280_COMP_TEMP_REG_COUNT + \ + BMP280_COMP_PRESS_REG_COUNT) + +#define BMP280_FILTER_MASK GENMASK(4, 2) +#define BMP280_FILTER_OFF 0 +#define BMP280_FILTER_2X 1 +#define BMP280_FILTER_4X 2 +#define BMP280_FILTER_8X 3 +#define BMP280_FILTER_16X 4 + +#define BMP280_OSRS_HUMIDITY_MASK GENMASK(2, 0) +#define BMP280_OSRS_HUMIDITY_SKIP 0 +#define BMP280_OSRS_HUMIDITY_1X 1 +#define BMP280_OSRS_HUMIDITY_2X 2 +#define BMP280_OSRS_HUMIDITY_4X 3 +#define BMP280_OSRS_HUMIDITY_8X 4 +#define BMP280_OSRS_HUMIDITY_16X 5 + +#define BMP280_OSRS_TEMP_MASK GENMASK(7, 5) +#define BMP280_OSRS_TEMP_SKIP 0 +#define BMP280_OSRS_TEMP_1X 1 +#define BMP280_OSRS_TEMP_2X 2 +#define BMP280_OSRS_TEMP_4X 3 +#define BMP280_OSRS_TEMP_8X 4 +#define BMP280_OSRS_TEMP_16X 5 + +#define BMP280_OSRS_PRESS_MASK GENMASK(4, 2) +#define BMP280_OSRS_PRESS_SKIP 0 +#define BMP280_OSRS_PRESS_1X 1 +#define BMP280_OSRS_PRESS_2X 2 +#define BMP280_OSRS_PRESS_4X 3 +#define BMP280_OSRS_PRESS_8X 4 +#define BMP280_OSRS_PRESS_16X 5 + +#define BMP280_MODE_MASK GENMASK(1, 0) +#define BMP280_MODE_SLEEP 0 +#define BMP280_MODE_FORCED 1 +#define BMP280_MODE_NORMAL 3 + +/* BMP180 specific registers */ +#define BMP180_REG_OUT_XLSB 0xF8 +#define BMP180_REG_OUT_LSB 0xF7 +#define BMP180_REG_OUT_MSB 0xF6 + +#define BMP180_REG_CALIB_START 0xAA +#define BMP180_REG_CALIB_COUNT 22 + +#define BMP180_MEAS_CTRL_MASK GENMASK(4, 0) +#define BMP180_MEAS_TEMP 0x0E +#define BMP180_MEAS_PRESS 0x14 +#define BMP180_MEAS_SCO BIT(5) +#define BMP180_OSRS_PRESS_MASK GENMASK(7, 6) +#define BMP180_MEAS_PRESS_1X 0 +#define BMP180_MEAS_PRESS_2X 1 +#define BMP180_MEAS_PRESS_4X 2 +#define BMP180_MEAS_PRESS_8X 3 + +/* BMP180 and BMP280 common registers */ +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_RESET 0xE0 +#define BMP280_REG_ID 0xD0 + +#define BMP380_CHIP_ID 0x50 +#define BMP180_CHIP_ID 0x55 +#define BMP280_CHIP_ID 0x58 +#define BME280_CHIP_ID 0x60 +#define BMP280_SOFT_RESET_VAL 0xB6 + +/* BMP280 register skipped special values */ +#define BMP280_TEMP_SKIPPED 0x80000 +#define BMP280_PRESS_SKIPPED 0x80000 +#define BMP280_HUMIDITY_SKIPPED 0x8000 + +/* Regmap configurations */ +extern const struct regmap_config bmp180_regmap_config; +extern const struct regmap_config bmp280_regmap_config; +extern const struct regmap_config bmp380_regmap_config; + +/* Probe called from different transports */ +int bmp280_common_probe(struct device *dev, + struct regmap *regmap, + unsigned int chip, + const char *name, + int irq); + +/* PM ops */ +extern const struct dev_pm_ops bmp280_dev_pm_ops; -- cgit v1.2.3