From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/pressure/mpl115.c | 254 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 254 insertions(+) create mode 100644 drivers/iio/pressure/mpl115.c (limited to 'drivers/iio/pressure/mpl115.c') diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c new file mode 100644 index 000000000..02ea38c8a --- /dev/null +++ b/drivers/iio/pressure/mpl115.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald + * + * TODO: synchronization with system suspend + */ + +#include +#include +#include +#include + +#include "mpl115.h" + +#define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */ +#define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */ +#define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */ +#define MPL115_B1 0x06 /* 2 bit integer, 13 bit fraction */ +#define MPL115_B2 0x08 /* 1 bit integer, 14 bit fraction */ +#define MPL115_C12 0x0a /* 0 bit integer, 13 bit fraction */ +#define MPL115_CONVERT 0x12 /* convert temperature and pressure */ + +struct mpl115_data { + struct device *dev; + struct mutex lock; + s16 a0; + s16 b1, b2; + s16 c12; + struct gpio_desc *shutdown; + const struct mpl115_ops *ops; +}; + +static int mpl115_request(struct mpl115_data *data) +{ + int ret = data->ops->write(data->dev, MPL115_CONVERT, 0); + + if (ret < 0) + return ret; + + usleep_range(3000, 4000); + + return 0; +} + +static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2) +{ + int ret; + u16 padc, tadc; + int a1, y1, pcomp; + unsigned kpa; + + mutex_lock(&data->lock); + ret = mpl115_request(data); + if (ret < 0) + goto done; + + ret = data->ops->read(data->dev, MPL115_PADC); + if (ret < 0) + goto done; + padc = ret >> 6; + + ret = data->ops->read(data->dev, MPL115_TADC); + if (ret < 0) + goto done; + tadc = ret >> 6; + + /* see Freescale AN3785 */ + a1 = data->b1 + ((data->c12 * tadc) >> 11); + y1 = (data->a0 << 10) + a1 * padc; + + /* compensated pressure with 4 fractional bits */ + pcomp = (y1 + ((data->b2 * (int) tadc) >> 1)) >> 9; + + kpa = pcomp * (115 - 50) / 1023 + (50 << 4); + *val = kpa >> 4; + *val2 = (kpa & 15) * (1000000 >> 4); +done: + mutex_unlock(&data->lock); + return ret; +} + +static int mpl115_read_temp(struct mpl115_data *data) +{ + int ret; + + mutex_lock(&data->lock); + ret = mpl115_request(data); + if (ret < 0) + goto done; + ret = data->ops->read(data->dev, MPL115_TADC); +done: + mutex_unlock(&data->lock); + return ret; +} + +static int mpl115_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mpl115_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + pm_runtime_get_sync(data->dev); + ret = mpl115_comp_pressure(data, val, val2); + if (ret < 0) + return ret; + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_RAW: + pm_runtime_get_sync(data->dev); + /* temperature -5.35 C / LSB, 472 LSB is 25 C */ + ret = mpl115_read_temp(data); + if (ret < 0) + return ret; + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + *val = ret >> 6; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + *val = -605; + *val2 = 750000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SCALE: + *val = -186; + *val2 = 915888; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static const struct iio_chan_spec mpl115_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static const struct iio_info mpl115_info = { + .read_raw = &mpl115_read_raw, +}; + +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops) +{ + struct mpl115_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->dev = dev; + data->ops = ops; + mutex_init(&data->lock); + + indio_dev->info = &mpl115_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mpl115_channels; + indio_dev->num_channels = ARRAY_SIZE(mpl115_channels); + + ret = data->ops->init(data->dev); + if (ret) + return ret; + + dev_set_drvdata(dev, indio_dev); + + ret = data->ops->read(data->dev, MPL115_A0); + if (ret < 0) + return ret; + data->a0 = ret; + ret = data->ops->read(data->dev, MPL115_B1); + if (ret < 0) + return ret; + data->b1 = ret; + ret = data->ops->read(data->dev, MPL115_B2); + if (ret < 0) + return ret; + data->b2 = ret; + ret = data->ops->read(data->dev, MPL115_C12); + if (ret < 0) + return ret; + data->c12 = ret; + + data->shutdown = devm_gpiod_get_optional(dev, "shutdown", + GPIOD_OUT_LOW); + if (IS_ERR(data->shutdown)) + return dev_err_probe(dev, PTR_ERR(data->shutdown), + "cannot get shutdown gpio\n"); + + if (data->shutdown) { + /* Enable runtime PM */ + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + /* + * As the device takes 3 ms to come up with a fresh + * reading after power-on and 5 ms to actually power-on, + * do not shut it down unnecessarily. Set autosuspend to + * 2000 ms. + */ + pm_runtime_set_autosuspend_delay(dev, 2000); + pm_runtime_use_autosuspend(dev); + pm_runtime_put(dev); + + dev_dbg(dev, "low-power mode enabled"); + } else + dev_dbg(dev, "low-power mode disabled"); + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_NS_GPL(mpl115_probe, IIO_MPL115); + +static int mpl115_runtime_suspend(struct device *dev) +{ + struct mpl115_data *data = iio_priv(dev_get_drvdata(dev)); + + gpiod_set_value(data->shutdown, 1); + + return 0; +} + +static int mpl115_runtime_resume(struct device *dev) +{ + struct mpl115_data *data = iio_priv(dev_get_drvdata(dev)); + + gpiod_set_value(data->shutdown, 0); + usleep_range(5000, 6000); + + return 0; +} + +EXPORT_NS_RUNTIME_DEV_PM_OPS(mpl115_dev_pm_ops, mpl115_runtime_suspend, + mpl115_runtime_resume, NULL, IIO_MPL115); + +MODULE_AUTHOR("Peter Meerwald "); +MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3